Shared Spotlight
    Metstrade 2026 logo

    5 Exhibitors to Visit at Metstrade 2026

    This guide covers five stands spanning emission-compliant propulsion, integrated navigation stacks, onboard comfort systems, superyacht coatings, and helm electronics, addressing the core specification decisions facing boat builders, refit yards, and fleet operators at RAI Amsterdam.

    17–19 November 2026RAI AmsterdamAmsterdam7 min read

    Paid placement disclosure. These exhibitor sections are paid Shared Spotlight placements. Inclusion is not an award, ranking, or TradeShowIntel endorsement, and it does not affect independent Floor Picks.Disclosure version 2026-09

    Five stands worth planning around at Metstrade 2026

    Metstrade 2026 runs from 17 to 19 November at RAI Amsterdam, one of Europe's largest convention complexes. The show spans Hall 08, Hall 11, Hall 1, and additional exhibition space, hosting hundreds of marine equipment and technology suppliers across propulsion, electronics, coatings, onboard systems, and emerging yacht technology. Walking the full floor without a plan means covering significant ground between halls, often backtracking, and arriving at high-priority stands without enough time for a meaningful conversation.

    The five companies featured in this Shared Spotlight, Volvo Penta, Garmin USA, Dometic Denmark A/S, Jotun A/S, and Raymarine, collectively address the specification decisions that appear earliest in a new-build or refit project: driveline selection, navigation and switching architecture, onboard climate and stabilisation, hull coating strategy, and helm electronics integration. Visiting all five in a single morning or afternoon block gives a buyer a working view of how those systems interact before committing to any single supplier conversation.

    Why these exhibitors

    A route built around early-stage specification decisions

    These five companies are grouped because their product categories overlap at the point where a boat builder or refit yard begins committing to a system architecture. Propulsion type affects electrical load, which affects switching and navigation power budgets, which in turn affects helm layout and electronics selection. Coating choice connects to hull performance and service intervals, which feeds back into operational cost modelling. Visiting Volvo Penta, Garmin USA, Dometic Denmark A/S, Jotun A/S, and Raymarine in close sequence allows a buyer to surface those interdependencies in a single floor session rather than across separate trade events. This page does not rank these companies against others exhibiting at Metstrade 2026, and buyers should use the official show directory to identify additional suppliers relevant to their projects.

    How to use this Shared Spotlight

    1. Download the RAI Amsterdam floor plan Before arriving, mark Hall 08 booth 08.365 for Volvo Penta, Hall 11 booth 11.601 for Jotun, and Hall 1 booth 01.111 for Raymarine. Confirm booth locations for Garmin USA and Dometic Denmark A/S with the official show directory on arrival, as those were not confirmed at publication.
    2. Read each exhibitor card before you walk Each card in this guide includes a specific buyer profile and the product categories on show. Identify which stands match your current specification stage so you can prioritise your time at each stop.
    3. Follow the suggested route to reduce backtracking The route below moves from Hall 08 toward Hall 11 and then to Hall 1, keeping cross-hall travel to a minimum. Adjust the order if your own meeting schedule requires it, but try to group halls rather than alternating between them.
    4. Reserve time for follow-up questions Each of these stands covers multiple product lines. Budget at least 20 minutes per stop if you are evaluating a full system rather than a single component, and collect direct contact details for the technical sales representative on site.

    Floor-planning tip Block a single three-hour window on day one of the show to walk all five stands in sequence, starting at Hall 08 when foot traffic is lightest in the first hour after doors open.

    TL;DR

    5 stops worth planning

    Suggested floor route

    Hall 08 to Hall 11 to Hall 1

    Starting at Volvo Penta in Hall 08, moving to Jotun in Hall 11, and finishing at Raymarine in Hall 1 keeps the route broadly linear across the RAI complex, with Garmin USA and Dometic Denmark A/S slotted in according to their confirmed positions in the official show directory.

    1. 1Volvo PentaPrioritize this stand if you are a boat builder, naval architect or commercial operator specifying emission-compliant propulsion and want to evaluate diesel, hybrid and fully electric driveline options from a single integrated supplier.Hall 08 · 08.365
    2. 2Garmin USAPrioritize this stand if you are a boat builder, systems integrator or refit dealer specifying a complete navigation, autopilot, sonar and digital-switching stack from a single supplier.
    3. 3Dometic Denmark A/SPrioritize this stand if you are a boat builder, naval architect, or refit yard specifying multiple onboard systems and want to evaluate cooling, climate, stabilisation, steering, and sanitation from a single supplier with verified DAME recognition across all three categories.Booth 01.131, 01.231, 01.232, 01.233
    4. 4Jotun A/SPrioritize this stand if you are a superyacht builder, refit yard, or fleet manager specifying antifouling and topcoat systems where hull performance, service intervals, and verified carbon-footprint reduction all factor into the coating decision.Hall 11 · 11.601
    5. 5RaymarinePrioritize this stand if you are a boat builder, OEM, or fleet operator specifying integrated helm electronics and want to evaluate solid-state radar, sonar, and assisted docking technologies from a single supplier with a verified commercial marine division on site.Hall 1 · 01.111
    Volvo Penta logo

    Volvo Penta

    Global manufacturer of marine and industrial engines and complete power systems, with diesel and gasoline engines from 10 to 1,000 hp

    Booth08.365Hall 08
    Read company profilePrioritize this stand if you are a boat builder, naval architect or commercial operator specifying emission-compliant propulsion and want to evaluate diesel, hybrid and fully electric driveline options from a single integrated supplier.Read more

    About

    Volvo Penta, headquartered in Gothenburg, Sweden and part of the Volvo Group, has manufactured marine and industrial engines since 1907. The company's product range spans diesel and gasoline engines from 10 to 1,000 hp, including the D4, D6, D8 and D13 diesel series, the Inboard Performance System pod-drive platform, and a new family of hybrid and fully electric IPS drivelines. Many engines in the lineup carry IMO Tier III certification and support renewable fuel use.

    With approximately 3,500 dealers across more than 130 countries, Volvo Penta offers buyers a globally distributed service and parts network that is relevant for both leisure OEMs and commercial operators. Over 40,000 IPS drivelines are in active operation across a 20-year production history, and the company runs an established remanufacturing program covering complete D4, D6, D8 and D13 engines as well as the IPS range, giving buyers a cost-considered alternative to new units.

    We have built up strong expertise based on 20 years of efficient operation with more than 40,000 Volvo Penta IPS drivelines in operation, as well as recent successful market pilots in marine electrification.

    At Metstrade 2026

    At Metstrade 2026, Volvo Penta is presenting its integrated propulsion portfolio under the Engines and Motors category in Hall 08. The stand features the D13 IPS Hybrid system, a fully integrated helm-to-propeller hybrid-electric driveline pairing the D13 engine with electric propulsion, with limited-scale production scheduled to begin in late 2025 ahead of broader availability. The company is also showcasing its new Electric IPS marine propulsion range, a family of five fully electric drivelines developed initially for the commercial marine sector. Boat builders and commercial operators attending the show can see how Volvo Penta's diesel, hybrid and electric lines are positioned as a connected system from helm to propeller.

    D13 IPS Hybrid: integrated helm-to-propeller hybrid-electric driveline with limited production from end of 2025Electric IPS range: five fully electric drivelines developed for commercial marine applicationsIPS pod-drive platform: forward-facing counter-rotating propellers, 40,000+ units in operation over 20 yearsIMO Tier III compliance and renewable fuel support across D4, D6, D8 and D13 diesel enginesRemanufactured driveline program covering D4, D6, D8, D13 engines and IPS unitsHybrid-electric propulsionElectric IPSPod-drive systemsIMO Tier III
    Why visit

    Prioritize this stand if you are a boat builder, naval architect or commercial operator specifying emission-compliant propulsion and want to evaluate diesel, hybrid and fully electric driveline options from a single integrated supplier.

    What to ask at the booth

    • What is the delivery timeline and availability for the D13 IPS hybrid-electric package?
    • Which vessels and duty cycles is the Electric IPS range best suited for today?
    • How does IPS comply with IMO Tier III, and which renewable fuels are currently supported?
    • What service and parts coverage does your dealer network provide in our operating region?
    • How does the remanufactured driveline program compare in cost and lead time to ordering new units?
    Garmin USA logo

    Garmin USA

    GPS-enabled marine electronics spanning chartplotters, sonar, autopilots, radar, satellite communication and marine audio.

    Read company profilePrioritize this stand if you are a boat builder, systems integrator or refit dealer specifying a complete navigation, autopilot, sonar and digital-switching stack from a single supplier.Read more

    About

    Garmin, headquartered in Olathe, Kansas and founded in 1989, employs approximately 23,000 people across its global operations. Its marine division covers multifunction chartplotters, sonar, autopilots, radar, satellite communications and marine audio, with Navionics charts, Fusion/Apollo audio, JL Audio and Lumishore all operating under the Garmin umbrella.

    Garmin has been named NMEA Manufacturer of the Year in the large manufacturer category for 11 consecutive years and took eight of 21 NMEA Product of Excellence awards in 2025, the most of any manufacturer at that event. Its proprietary Garmin Marine Network and NMEA 2000 integration unifies sonar, radar, autopilot, instruments and cameras into a single onboard architecture, a point of particular relevance for OEM builders and systems integrators managing complex electrical and navigation suites.

    Garmin is always setting the benchmark higher. They won again this year because of their innovative products, great workplace culture and drive to give back. — Gary Reich, Editor-in-Chief, Soundings Trade Only

    At Metstrade 2026

    Garmin is a long-standing Metstrade exhibitor and brings its full marine electronics portfolio to RAI Amsterdam, including the GPSMAP 9000 Series chartplotters, Reactor 40 autopilot systems, GSD 28 sonar black box and the Garmin OnBoard wireless man-overboard detection system. The stand also covers EmpirBus digital electrical switching and automation, a line directed at leisure and superyacht builders integrating smart onboard power management. Visitors can explore how Navionics, Fusion/Apollo audio, JL Audio and Lumishore products fit into bundled OEM and refit programs.

    GPSMAP 9027: the first chartplotter with an integrated 4K touchscreen for system-wide onboard controlReactor 40 autopilot with SmartPump v2 and OneHelm integrationGSD 28 sonar black box paired with compatible multifunction displaysGarmin OnBoard wireless MOB detection and engine cutoff, recognized at the DAME Design AwardsEmpirBus digital switching and automation for leisure and superyacht buildersChartplottersAutopilotDigital SwitchingSonar
    Why visit

    Prioritize this stand if you are a boat builder, systems integrator or refit dealer specifying a complete navigation, autopilot, sonar and digital-switching stack from a single supplier.

    What to ask at the booth

    • What is the NMEA 2000 and OneHelm third-party integration roadmap for 2026?
    • How does the Garmin Marine Network simplify installing and troubleshooting a full onboard electronics suite?
    • Which Navionics, Fusion/Apollo and JL Audio products can be bundled for OEM or production-boat programs?
    • What new GPSMAP and sonar capabilities are launching for the 2026 season?
    • What warranty, dealer training and in-field support programs do you offer integrators?
    Dometic Denmark A/S logo

    Dometic Denmark A/S

    Marine onboard systems for cooling, HVAC, gyro stabilisation, steering, sanitation, and comfort for boats.

    Booth01.131, 01.231, 01.232, 01.233
    Read company profilePrioritize this stand if you are a boat builder, naval architect, or refit yard specifying multiple onboard systems and want to evaluate cooling, climate, stabilisation, steering, and sanitation from a single supplier with verified DAME recognition across all three categories.Read more

    About

    Dometic Denmark A/S is a Danish subsidiary of Dometic Group AB, headquartered in Solna, Stockholm, Sweden. The group was founded in 1922 and employs approximately 7,000 people worldwide, with products sold in more than 100 countries and net sales of SEK 21 billion in 2025. Its marine portfolio spans refrigeration, HVAC, gyroscopic stabilisation, electronic and electro-hydraulic steering, and sanitation systems, serving OEMs, boat builders, distributors, and refit yards.

    At Metstrade 2025, Dometic earned two DAME category wins and a Special Mention across three distinct product disciplines: the CSX ColdMachine refrigeration system (Onboard Facilities, Comfort and Entertainment), the DG3 Gyro Stabilizer (Propulsion and Dynamics), and the Sanitation Wall Holding Tank Series with VacuMAX Technology. That breadth of recognition across unrelated engineering categories reflects a cross-disciplinary marine team capable of supplying integrated, compact, lower-energy onboard systems from a single supplier relationship.

    Winning two DAME Design Awards and receiving a Special Mention is a tremendous recognition of the exceptional creativity and cross-discipline collaboration our global marine team delivers every day.

    At Metstrade 2026

    At Metstrade 2026 the Dometic Group marine division is presenting its full onboard systems portfolio. Confirmed products on show include the Dometic CX600, a DC-driven condensing unit for custom fishboxes using eco-friendly R1234yf refrigerant released during the show on 18 November 2026, the GVTX 48VDC variable-capacity marine HVAC, and the Sanitation Wall Holding Tank Series with VacuMAX Technology. Visitors can also engage with the DG3 Gyro Stabilizer, Optimus steering systems, and the broader cooling and climate range.

    Dometic CX600 DC-driven condensing unit with R1234yf refrigerant, released 18 November 2026DG3 Gyro Stabilizer: 2025 DAME category winner, Propulsion and DynamicsCSX ColdMachine refrigeration: 2025 DAME category winner, Onboard FacilitiesSanitation Wall Holding Tank Series with VacuMAX Technology: 2025 DAME Special MentionGVTX 48VDC variable-capacity marine HVAC for low-voltage DC vessel architecturesGyro stabilisationMarine HVACDC refrigerationVacuMAX sanitation
    Why visit

    Prioritize this stand if you are a boat builder, naval architect, or refit yard specifying multiple onboard systems and want to evaluate cooling, climate, stabilisation, steering, and sanitation from a single supplier with verified DAME recognition across all three categories.

    What to ask at the booth

    • Which refrigeration model is best suited to a 35 to 50 ft sailboat retrofit, and what is the installation footprint?
    • How does the DG3 gyro compare on spin-up time and maintenance intervals versus other stabiliser technologies?
    • What water-consumption savings does the VacuMAX sanitation system deliver versus conventional holding tanks?
    • Do you offer OEM program pricing and engineering support for integrated HVAC and refrigeration packages?
    • Can the Optimus steering system be integrated with existing third-party autopilots on the same NMEA network?
    Jotun A/S logo

    Jotun A/S

    Premium marine and yacht coatings, including antifouling, topcoats, and hull protection systems for superyachts and the world's best yachts.

    Booth11.601Hall 11
    Read company profilePrioritize this stand if you are a superyacht builder, refit yard, or fleet manager specifying antifouling and topcoat systems where hull performance, service intervals, and verified carbon-footprint reduction all factor into the coating decision.Read more

    About

    Jotun A/S is a Norwegian coatings manufacturer headquartered in Sandefjord, founded in 1926 and continuously family-owned by the Gleditsch family since its inception. The company employs approximately 10,933 people across 40 production facilities operating in more than 100 countries. Its yachting product range spans silyl acrylate self-polishing antifoulings, high-performance underwater hull systems, and premium finish topcoats serving superyacht builders, refit yards, professional applicators, and fleet operators.

    Jotun's Imperial Fouling Protection System uses per-vessel calibration, factoring in a yacht's sailing pattern, voyage factor, and operating environment, to deliver a lifecycle carbon footprint approximately 50% lower than conventional antifouling over a 30-year service life, a claim validated in partnership with the Water Revolution Foundation. The company's global technical service teams and JotunCare programme support long-term coating maintenance planning at refit yards worldwide, making Jotun relevant to specifiers and captains managing both performance and sustainability targets.

    This is ultimately about giving owners strong performance while reducing environmental footprint where possible. — Tracey Warner, Regional Category Manager Yachting, Europe and Central Asia, Jotun Performance Coatings

    At Metstrade 2026

    Jotun Yachting is exhibiting in Hall 11 at stand 11.601 as part of Metstrade's Construction Materials Zone. Visitors can review the full yachting coatings portfolio in person, including the Imperial Fouling Protection System, NonStop II, NonStop Supreme, and the MegaGloss topcoat with its GlassTouch finish. Technical representatives are on hand to discuss product selection for specific vessel types, sailing profiles, and cruising regions, as well as the sustainability credentials and lifecycle data underpinning the antifouling range.

    Imperial Fouling Protection System: silyl acrylate self-polishing antifouling calibrated per vessel to sailing pattern and operating environmentApproximately 50% lower carbon footprint over a 30-year service life versus conventional antifouling, validated with the Water Revolution FoundationNonStop II and NonStop Supreme: tiered antifouling options offering up to 12 months service period, with colour stability and fast-drying finishMegaGloss topcoat with GlassTouch finish, lasting up to twice as long as traditional yachting topcoatsJotunCare lifecycle inspection and crew education programme for ongoing hull maintenance planningAntifoulingSuperyacht coatingsHull protectionSustainable coatings
    Why visit

    Prioritize this stand if you are a superyacht builder, refit yard, or fleet manager specifying antifouling and topcoat systems where hull performance, service intervals, and verified carbon-footprint reduction all factor into the coating decision.

    What to ask at the booth

    • How does Imperial's self-polishing formulation behave during extended idle or anchor periods typical of superyachts?
    • Can you share the lifecycle assessment data behind the 50% lower carbon footprint claim and confirm the Water Revolution Foundation validation process?
    • What is the expected service interval for NonStop II versus NonStop Supreme in warm-water and tropical cruising conditions?
    • Do you supply colour-matched or custom MegaGloss topcoat systems through the Metallic Collection for a specific hull colour?
    • How does the JotunCare programme structure lifecycle inspections and crew education for a single vessel or a small managed fleet?
    Raymarine logo

    Raymarine

    Manufacturer of marine electronics including chartplotters, fishfinders, radars, marine instruments, cameras, AIS units and VHF radios for recreational and light commercial vessels.

    Booth01.111Hall 1
    Read company profilePrioritize this stand if you are a boat builder, OEM, or fleet operator specifying integrated helm electronics and want to evaluate solid-state radar, sonar, and assisted docking technologies from a single supplier with a verified commercial marine division on site.Read more

    About

    Raymarine, a Teledyne FLIR business headquartered in Fareham, Hampshire, UK, has manufactured marine electronics since 1923, when the company produced the first commercial echosounder. Today its product range spans chartplotters and multifunction displays (Axiom 2, Axiom Pro S), solid-state and open-array radar, RealVision sonar, AIS units, VHF radios, marine cameras, and the DockSense assisted docking system. The company serves recreational boaters, offshore fishing captains, sailing skippers, and light commercial marine operators through more than 7,500 dealers and installers across 110 countries.

    Raymarine holds a position as a navigation system supplier to the U.S. Coast Guard and maintains offices in 12 countries. Its heritage of firsts, including the first recreational autopilot in 1974, the SeaTalk single-cable network in 1989, and the first marine multifunction display in 2004, gives boat builders and OEMs a long reference list when specifying integrated helm electronics. At Metstrade 2026, the company also exhibits under the Teledyne Raymarine Commercial banner in Hall 8 (stand 08.741), addressing workboat and superyacht operators separately from the main recreational stand.

    At Metstrade 2026

    At stand 01.111 in Hall 1, Raymarine is presenting its Pathfinder solid-state radar range alongside next-generation electronic navigation and situational awareness technologies. The Teledyne Raymarine Commercial division occupies a second stand, 08.741 in Hall 8 within the Superyacht Zone, focusing on commercial and professional marine navigation solutions. Raymarine is also a foundation partner of the IBI Metstrade Boat Builder Awards for Business Achievement 2026, held during the show.

    Pathfinder solid-state radar: live demonstration of target detection and range performanceAxiom 2 multifunction display with RealVision MAX sonar and NMEA 2000 engine integrationDockSense Control object detection and bird's-eye assisted docking systemClearCruise Augmented Reality overlay combining AIS data, marine cameras, and image stabilizationTeledyne Raymarine Commercial stand 08.741 (Hall 8) for workboat and superyacht fleet navigationSolid-state radarChartplotters / MFDAssisted dockingAugmented reality nav
    Why visit

    Prioritize this stand if you are a boat builder, OEM, or fleet operator specifying integrated helm electronics and want to evaluate solid-state radar, sonar, and assisted docking technologies from a single supplier with a verified commercial marine division on site.

    What to ask at the booth

    • Can you walk me through the Axiom 2 RealVision MAX sonar options and which transducer matches my hull type and depth requirements?
    • What is the current roadmap for LightHouse Charts GEN 2 and compatibility with third-party chart formats such as Navionics and C-MAP?
    • How does DockSense Control integrate with existing Axiom displays, and what vessel types and installations is it certified for?
    • Which engine brands and NMEA 2000 configurations are supported for engine monitoring across Mercury, Yamaha, and Suzuki?
    • What commercial navigation solutions does Teledyne Raymarine Commercial offer for a workboat or superyacht fleet?

    Before you leave the hall

    Make your notes count before day two

    After visiting all five stands, consolidate your notes the same evening while conversations are fresh. Record which technical contacts you spoke with, which product brochures or specification sheets you collected, and any follow-up demonstrations or factory visits offered by the exhibitors.

    For the full Metstrade 2026 exhibitor directory, hall maps, and session schedule, visit the TradeShowIntel event page and the official show website listed below.

    Metstrade 2026 on TradeShowIntel Official Metstrade website

    Frequently asked questions

    Planning this Metstrade 2026 route

    When and where does Metstrade 2026 take place?

    Metstrade 2026 runs from 17 to 19 November 2026 at RAI Amsterdam in Amsterdam, the Netherlands.

    Which halls should I prioritise for the exhibitors in this guide?

    Hall 08 houses Volvo Penta at stand 08.365. Hall 11 houses Jotun at stand 11.601. Hall 1 houses Raymarine at stand 01.111. Booth locations for Garmin USA and Dometic Denmark A/S were not confirmed at publication, so check the official show directory on arrival.

    Who is this Shared Spotlight page written for?

    This page is written for boat builders, naval architects, refit yards, systems integrators, and fleet operators who are actively specifying propulsion, navigation, onboard comfort, coatings, or helm electronics and want to structure their Metstrade floor time around those decisions.

    How do I contact the exhibitors featured in this guide?

    Each exhibitor card on this page includes a direct link to the company's profile and contact details. You can also find official stand contact information through the Metstrade exhibitor directory at metstrade.com.

    Does being featured in this Shared Spotlight mean these are the only exhibitors worth visiting at Metstrade 2026?

    No. This guide covers five companies that paid for placement in this Shared Spotlight. Metstrade 2026 hosts many additional suppliers across every category represented here. Use the official show directory to build a complete list suited to your specific sourcing needs.