Exclusive Spotlight

    Tokyo Electron at SEMICON Japan 2026: Three Process Decisions

    Connect coating and development, plasma etch and wafer cleaning through the process requirements and qualification evidence each tool must satisfy.

    Exclusive Spotlight9-11 December 2026TokyoBooths E2447 and M0039
    Website

    8 min read · Tokyo · 9-11 December 2026

    9-11 December 2026
    SEMICON Japan 2026Tokyo Big Sight · TokyoBooths E2447 and M0039
    Editor's Pick

    Bring one process-integration problem, then select the tool discussion

    An independent TradeShowIntel editorial feature for event meeting preparation. Tokyo Electron appears in the official SEMICON Japan 2026 directory at E2447 and M0039. For a process or equipment team, the value of a meeting is the opportunity to define how one step affects the next: coating and development establish a pattern, etch transfers it, and cleaning must remove the relevant residues without compromising the structure. LITHIUS Pro DICE, Tactras and CELLESTA-i MD give the discussion named equipment platforms. Their published capabilities are a starting point for a qualification plan, not evidence of an outcome on a buyer's process.

    • LITHIUS Pro DICE is a 300 mm coater/developer with published scope from High NA EUV to DUV processing.
    • Tactras is a configurable 300 mm plasma-etch platform with application-specific chamber choices.
    • CELLESTA-i MD addresses single-wafer cleaning and drying requirements, including control of pattern damage.
    TL;DR

    The visit in brief

    1. For semiconductor process, integration and equipment teams with a defined wafer-processing requirement.
    2. The shortlist separates a coater/developer, a plasma-etch platform and a single-wafer cleaning system.
    3. Bring an approved process brief, acceptance metrics and tool-interface requirements for the discussion.
    4. The current organiser map lists E2447 and M0039; confirm which location hosts the relevant team.
    5. SEMICON Japan runs 9–11 December 2026 at Tokyo Big Sight.

    Tokyo Electron

    Connect coating and development, plasma etch and wafer cleaning through the process requirements and qualification evidence each tool must satisfy.

    Headquarters
    Minato-ku, Tokyo, Japan
    Industry
    Semiconductor manufacturing
    Founded
    1963
    Website
    https://www.tel.com
    Event
    SEMICON Japan 2026
    Dates
    9-11 December 2026
    Booth
    Booths E2447 and M0039
    Key products
    • CLEAN TRACK LITHIUS Pro DICE
    • Tactras plasma etch system
    • CELLESTA-i MD cleaning system
    Exhibitor briefing

    Evaluate the process boundary as well as the equipment

    Tokyo Electron develops semiconductor production equipment across several manufacturing steps. This shortlist focuses on three published platforms for patterning and surface preparation, allowing a visitor to identify the appropriate technical discussion before requesting a wider equipment proposal.

    A process engineer should define the material stack, wafer format and intended operation before comparing tool-level claims. The important measures may include defectivity, profile or dimensional control, residue removal and pattern integrity. Equipment and integration staff will also need the proposed configuration, factory interfaces, utilities and maintenance requirements.

    The products below are public portfolio offerings, not a confirmed display list. Agree what can be discussed at the event and what requires a subsequent technical review or controlled evaluation. Use approved or anonymised information for the initial meeting, then define the data and sample handling needed for any deeper qualification work.

    Buyer fit

    Where this conversation earns its place

    Prepare an approved process brief with wafer format, operation, relevant material context, acceptance metrics and factory-interface questions.

    Good fit if you

    • Have a defined coating, etch or wafer-cleaning requirement and an acceptance method.
    • Need to compare process capability with equipment configuration and factory integration.
    • Want to investigate a cross-step issue such as residues, defectivity or pattern integrity.
    • Can involve process, equipment and integration teams in setting an evaluation boundary.

    Skip if

    • Need an equipment recommendation without specifying the intended process or wafer requirements.
    • Treat a family-level throughput or defect-control statement as a qualified result for another material stack.
    • Expect the show directory to identify the exact equipment or specialists at each listed location without confirmation.

    TSI buyer-fit guidance; confirm the proposed configuration and local supply directly with the exhibitor.

    Product and service shortlist

    Three platforms for a process-led meeting agenda

    These descriptions follow Tokyo Electron's current product pages. The proposed evaluation scenarios are TSI buyer guidance; equipment configuration and show availability must be agreed with the company.

    CLEAN TRACK LITHIUS Pro DICETactrasCELLESTA-i MD

    CLEAN TRACK LITHIUS Pro DICE: coating and development

    LITHIUS Pro DICE is a coater/developer for 300 mm wafers. Tokyo Electron describes support spanning High NA EUV to DUV applications, defect-control technologies and enhanced data collection compared with LITHIUS Pro Z. For a lithography team, start with the process requirement and the measures used to judge the coated and developed wafer. Ask which configuration addresses that flow, how tool data would support qualification and what needs to be aligned with the exposure and downstream steps. A useful follow-up is a proposed evaluation scope with the relevant wafer, recipe and metrology assumptions. Published platform capability does not establish process readiness for an untested resist or device structure.

    Tactras: application-specific plasma etch

    Tactras is a 300 mm plasma-etch platform with a rectangular cluster layout and configurable chambers for different applications. Tokyo Electron lists areas including high-aspect-ratio holes, trench, mask and dielectric etch. A process team should identify the layer and structure to be etched and the profile, selectivity and uniformity criteria that matter to the device. Discuss the proposed chamber and process boundary, then separate the qualification metrics from factory-level capacity planning. The useful output is a configuration and test plan that names the application, comparison method and assumptions. A platform's ability to accept several chamber types does not mean every chamber or recipe is interchangeable for the buyer's process.

    CELLESTA-i MD: cleaning and drying without losing pattern integrity

    CELLESTA-i MD is Tokyo Electron's 300 mm single-wafer cleaning platform with published cleaning, particle-removal and drying technologies. The company describes chamber-atmosphere control and IPA-dispensing improvements to address pattern collapse, alongside chemical-recycle concepts. For an integration team, a useful discussion begins with the contamination or residue to be removed and the structures that must survive the clean and dry sequence. Ask how the proposed process will be assessed for removal performance, material compatibility and pattern integrity, and what the configuration requires from the factory. The result should be an agreed qualification approach, not a blanket promise of damage-free cleaning across all surfaces and chemistries.

    Evaluation signals

    Evidence that makes the follow-up assessable

    Use these points when comparing the technical follow-up with the requirement you supplied.

    Process definition

    A named operation and material context

    Tie each proposed platform to the wafer step and the relevant dimensional, defect or surface measures.

    Qualification

    An agreed comparison and acceptance method

    Record the test assumptions and metrology needed before treating a published capability as a result for the intended process.

    Factory integration

    A configuration-specific interface scope

    Ask for utilities, automation interfaces, maintenance access and the responsibilities of equipment and process teams.

    Process definitionQualificationFactory integration

    Tie each proposed platform to the wafer step and the relevant dimensional, defect or surface measures. Ask for utilities, automation interfaces, maintenance access and the responsibilities of equipment and process teams.

    Company Background

    A Tokyo equipment company established in 1963

    Tokyo Electron was established on 11 November 1963 and is headquartered at Akasaka Biz Tower in Tokyo's Minato ward. Its development from a technology trading business into a semiconductor-equipment supplier is relevant to SEMICON visitors because the portfolio now spans multiple process steps and service requirements. That breadth should help identify the right specialist, while the actual evaluation remains specific to the selected platform, configuration and manufacturing flow. Establish the technical owner and follow-up path rather than treating the corporate portfolio as one undifferentiated tool offer. Image source: Tokyo Electron published product materials.

    Suggested meeting plan

    Prepare the technical conversation

    Suggested visitor preparation; appointment availability must be agreed with the exhibitor.

    Before the visit

    Prepare the relevant inputs

    1. Before requesting a meeting

      Prepare an approved process brief with wafer format, operation, relevant material context, acceptance metrics and factory-interface questions.

    At the event and after

    Test the scope and record responsibilities

    1. During the technical discussion

      Trace one process issue through the proposed tool configuration, the measurement method and the handover to the next manufacturing step.

    2. Agreed follow-up

      Request the proposed platform configuration, qualification assumptions, data and sample requirements, factory-interface documents and the technical-review owner.

    Meeting questions

    Five questions for Tokyo Electron

    Use the questions that match your proposed application and ask for answers tied to that specific scope.

    1. Which configuration of the proposed platform fits this process step, and what assumptions does the recommendation depend on?

      This establishes a technical boundary before platform-wide claims are compared with a specific manufacturing flow.

    2. For coating and development, which defect and metrology measures would you use to evaluate our process requirement?

      A lithography discussion needs a defined assessment of the processed wafer, not only the track's nominal productivity.

    3. For the etch application, how would you compare profile, selectivity and uniformity on the relevant structure?

      The criteria make chamber and process choices assessable against the intended device requirement.

    4. How would the clean-and-dry evaluation measure residue removal, material compatibility and pattern integrity together?

      A cleaning result must preserve the structures needed by downstream processing as well as remove the targeted contamination.

    5. What factory interfaces, maintenance provisions and technical-review steps belong in the next proposal?

      The equipment team needs a route from process interest to a configuration that can be installed, supported and qualified.

    Event details

    Plan the visit in Tokyo

    Booth: E2447; M0039

    Venue: Tokyo Big Sight

    Dates: 9-11 December 2026

    SEMICON Japan 2026 takes place 9-11 December 2026 at Tokyo Big Sight, Tokyo. The reviewed source lists Booths E2447 and M0039.

    Prepare an approved process brief with wafer format, operation, relevant material context, acceptance metrics and factory-interface questions.

    Official event information

    Organizer participation source

    Next step

    Send a defined requirement to Tokyo Electron

    Request the proposed platform configuration, qualification assumptions, data and sample requirements, factory-interface documents and the technical-review owner.

    Website
    Practical questions

    Practical questions before the visit

    Which SEMICON Japan directory locations are listed for Tokyo Electron?

    The reviewed 2026 event map lists E2447 and M0039. Confirm the appropriate location and specialist before arranging the technical discussion.

    When and where is SEMICON Japan 2026?

    The event runs 9–11 December 2026 at Tokyo Big Sight. Confirm the current programme and the location of the relevant Tokyo Electron team before arranging a meeting.

    Are these exact tools confirmed show exhibits?

    The product pages establish their portfolio scope. A display or demonstration schedule for these exact configurations has not been verified.

    Does LITHIUS Pro DICE include all lithography equipment?

    It is the coater/developer in this shortlist. Discuss its interfaces with exposure and other process steps rather than assuming it replaces every lithography tool.

    What should a team bring to an initial technical meeting?

    Use an approved process brief, relevant acceptance measures and factory-interface requirements. Agree the handling of detailed recipes, samples and confidential data before a subsequent evaluation.