5 Exhibitors to Visit at Interpack China 2026

Paid placement disclosure. These exhibitor sections are paid Shared Spotlight placements. Inclusion is not an award, ranking, or TradeShowIntel endorsement, and it does not affect independent Floor Picks.Disclosure version 2026-09

Why a floor plan matters at Interpack China 2026

Interpack China 2026 runs from 16 to 18 November at the Shanghai New International Expo Centre, one of Asia's largest convention facilities, where a full walk of the exhibition halls can consume an entire day without a deliberate plan. The show draws exhibitors across packaging materials, converting machinery, protective packaging systems, and logistics solutions, making it easy to spend the morning on tangential categories before reaching the suppliers most relevant to an active procurement or qualification project.

The five companies featured in this guide, Stora Enso International Oy Biomaterials Division, Nordmeccanica India Private Limited, Suzhou Jwell Plastic Machinery Co. Ltd., Nuevopak Global Ltd., and Super Dry Desiccant (Shenzhen) Co. Ltd., collectively address buyer jobs across renewable raw material sourcing, flexible packaging line investment, multilayer film and sheet production, paper-based protective packaging adoption, and certified moisture control for regulated shipments. All five are concentrated in Hall W1, which makes them practical to visit in a single focused session.

Why these exhibitors

Five buyer jobs, one hall

These five exhibitors were selected because they address distinct but complementary procurement decisions that often arise within the same packaging operation. A converter evaluating bio-based cushioning substrates will find relevant raw material options at Stora Enso. A production manager assessing laminating or metallizing capacity can review machine configurations at Nordmeccanica. A sheet or film producer benchmarking extrusion output will find co-extrusion and cast film lines at Jwell. A fulfillment or distribution manager replacing foam or plastic void-fill at packing stations can evaluate paper-based machinery at Nuevopak. A logistics or quality manager sourcing DMF-free, food-contact-compliant desiccants for ocean freight will find certified options at Super Dry Desiccant. The concentration of all five in Hall W1 makes it practical to address each of these jobs in a single morning without crossing the broader venue.

How to use this Shared Spotlight

Download booth numbers before you arrive Confirmed booth locations for this guide are Hall W1, W1P31 for Stora Enso and Hall W1, W1F01 for Super Dry Desiccant. Collect the remaining booth numbers from the official show floor plan at interpack-cn.com once the full exhibitor map is published, and note them alongside the anchor links in this page.
Anchor your route at the confirmed booths Start at W1P31 (Stora Enso) at the north end of Hall W1 and close the loop at W1F01 (Super Dry Desiccant). Use the suggested walk order in the route section below to fill in Nordmeccanica, Jwell, and Nuevopak between those two fixed points as their locations are confirmed.
Prepare one qualifying question per booth Each exhibitor card in this guide includes a buyer-specific reason to stop. Read the why-stop-here note before each visit and bring a concrete project parameter, such as a laminate structure, an annual volume, or a shipment lane, so conversations stay technical and time-efficient.
Reserve time for follow-up documentation Request data sheets, certifications, and lead-time information at each stand rather than relying on post-show email follow-up. Hall W1 can be crowded on the opening morning, so schedule the most specification-intensive conversations for day two when floor traffic is lighter.

Floor-planning tip Block a two-hour window on the morning of 17 November, the second show day, to walk all five Hall W1 booths in sequence, leaving the opening-day afternoon free for broader hall reconnaissance and the final day for any revisits or deeper technical discussions.

TL;DR

5 stops worth planning

Suggested floor route

Walk W1P31 to W1F01 with three stops between

Beginning at the confirmed Stora Enso location (W1P31) and ending at the confirmed Super Dry Desiccant location (W1F01) allows buyers to sequence Nordmeccanica, Jwell, and Nuevopak in between as their positions are confirmed, reducing the need to double back across Hall W1.

1STORA ENSO INTERNATIONAL OY - BIOMATERIALS DIVISIONPrioritize this stand if you are a packaging converter or brand owner evaluating plastic-free cushioning materials, or a resin or board manufacturer actively qualifying bio-based replacements for phenol or formaldehyde-based adhesives.Hall W1 · W1P31
2Nordmeccanica India Private LimitedPrioritize this stand if you are a flexible packaging converter evaluating high-speed laminating or metallizing lines and want to compare solventless, solvent-based and water-based process options on a single machine platform.
3SUZHOU JWELL PLASTIC MACHINERY CO.,LTD.Prioritize this stand if you are a packaging converter or sheet producer evaluating multilayer co-extrusion lines or screw extruder capacity from a manufacturer with a verified high-volume annual output.Hall W5, Booth W5B01
4NUEVOPAK GLOBAL LTD.Prioritize this stand if you manage an e-commerce fulfillment or distribution operation and are evaluating paper-based void-fill or cushioning machinery to replace plastic or foam materials at packing stations.Hall W2, Booth W2G42
5Super Dry Desiccant (Shenzhen) Co., Ltd.Prioritize this stand if you are sourcing certified, high-capacity desiccants for ocean freight containers or need DMF-free, food-contact-compliant moisture protection for food, pharmaceutical, or regulated consumer goods shipments.Hall W1 · W1F01

STORA ENSO INTERNATIONAL OY - BIOMATERIALS DIVISION

Producer of bio-based materials—kraft lignin, dissolving/fluff pulp, and wood-foam and bio-binder innovations—that replace fossil-based raw materials.

BoothW1P31W1

About

Stora Enso Biomaterials Division is the renewable materials arm of Stora Enso International Oy, headquartered in Helsinki, Finland and part of a group employing approximately 19,000 people across more than 20 countries. The division produces kraft chemical pulp, fluff pulp, dissolving pulp, and a portfolio of bio-based innovation products including Lineo® kraft lignin, Papira® wood foam, NeoLigno® bio-based binder, and Lignode® hard carbon derived from lignin.

Lineo® kraft lignin is produced at the Sunila mill in Finland and is available in Prime and Classic grades for replacing phenol in resins and bitumen in asphalt applications. Papira® wood foam, a plastic-free cushioning material produced from wood fiber, achieved a score of 100 out of 100 on the Harmonized European Recyclability test administered by Cepi, covering yield, visual impurity, and sheet adhesion. The group reported EUR 9.3 billion in sales for 2025, and its raw material supply traces to owned Nordic forests certified under chain-of-custody programs including PEFC.

At Interpack China 2026

At interpack China 2026 in Hall W1, stand W1P31, Stora Enso Biomaterials Division is presenting its renewable fiber-based packaging materials, with a focus on high-barrier paper materials designed for food-preservation performance and food-contact safety. Visitors can expect to see how the division's portfolio, including Papira® wood foam for protective cushioning and the broader bio-based materials range, addresses brand and converter requirements for switching away from fossil-based packaging formats.

Papira® wood foam: plastic-free, home-compostable protective cushioning with a 100/100 Cepi recyclability scoreLineo® kraft lignin in Prime and Classic grades for phenol substitution in resins and bitumen replacement in asphaltNeoLigno® bio-based binder: formaldehyde-free and isocyanate-free adhesive for boards and building materialsLignode® hard carbon: lignin-derived anode material for lithium-ion and sodium-ion battery applicationsPEFC chain-of-custody certification covering kraft lignin and pulp products with traceable Nordic forest originWood foam packagingKraft ligninBio-based bindersRenewable fiber

Why visit

Prioritize this stand if you are a packaging converter or brand owner evaluating plastic-free cushioning materials, or a resin or board manufacturer actively qualifying bio-based replacements for phenol or formaldehyde-based adhesives.

What to ask at the booth

Which Lineo® grade, Prime or Classic, is best suited for phenol replacement in my resin or plywood application, and what phenol substitution rates are achievable?
What are the mechanical performance specs and cushioning properties of Papira® compared to EPS or PE foam for protective packaging?
Can Papira® be supplied at commercial scale today, and what is the timeline for the first commercial-scale production system?
Is Lignode® hard carbon commercially available, and for which battery chemistries and cell formats is it currently validated?
What certifications and chain-of-custody documentation apply to your kraft lignin and pulp, and can samples be arranged for testing?

Nordmeccanica India Private Limited

Coating, laminating and vacuum-metallizing machinery for flexible packaging, food, industrial and pharmaceutical applications.

About

Nordmeccanica India Private Limited is the Mumbai-based subsidiary of Nordmeccanica SpA, an Italian machinery group founded in 1978 and headquartered in Piacenza. The India entity, incorporated in April 2012, serves as the regional technical and commercial presence for the parent group's portfolio of coating, laminating and vacuum-metallizing machines designed for flexible packaging converters. Key product lines include the Super Combi 5000 modular coating and laminating line, the Triplex SL 1-Shot three-ply solventless laminator, the Simplex SL and Duplex SL solventless laminators, and the NordMet Plus vacuum metallizer for plastic film and paper.

The Nordmeccanica Group reports a global installed base of more than 2,400 machines and publishes a claim of approximately 75 percent global market share in laminating machines for flexible packaging. At the time the India subsidiary opened its Mumbai office in 2013, the group reported 250 installed units in India and a claimed 90 percent share of flexible packaging laminating machines in that market. The modular Combi platform allows converters to switch between solvent-free, solvent-based and water-based adhesive processes using interchangeable trolleys on a single machine frame, which reduces capital outlay for operations running multiple lamination processes.

At Interpack China 2026

Nordmeccanica's presence at Interpack China 2026 is attributed to its China subsidiary, Nordmeccanica (Shanghai) Machinery Co., Ltd., which is confirmed in the official exhibitor directory. The Shanghai entity is listed as showing solventless laminating and coating machines including the Super Simplex SL and Triplex SL 1-Shot. Visitors interested in the group's full product scope, including the Super Combi 5000 modular line and NordMet Plus vacuum metallizer, should confirm at the stand which product lines and technical staff are available for discussion.

Super Combi 5000: modular line running at up to 450 m/min across web widths of 1,100 to 1,500 mm, supporting solventless, solvent-based, water-based, UV, EB and in-register coating via interchangeable trolleysTriplex SL 1-Shot: three-ply lamination in a single pass using solvent-free adhesivesSimplex SL and Duplex SL: one- and two-ply solventless laminating machines for film-to-film flexible packagingNordMet Plus: vacuum metallizer with paper metallization module (NORDMET P) and sublimation options for film and paper substratesGroup installed base of 2,400-plus machines globally, with a published claim of approximately 75 percent world market share in flexible packaging laminating machinesSolventless laminationVacuum metallizingModular coating linesFlexible packaging

Why visit

Prioritize this stand if you are a flexible packaging converter evaluating high-speed laminating or metallizing lines and want to compare solventless, solvent-based and water-based process options on a single machine platform.

What to ask at the booth

Can the Super Combi 5000 run solventless, water-based and solvent-based adhesives on the same frame via interchangeable trolleys, and what is the changeover time?
What web widths and maximum reel diameters are supported for our specific film substrates?
Do you offer paper metallization modules and in-register coating on pre-printed rolls through the NordMet Plus line?
What energy consumption and emission benchmarks can you share for solventless lamination versus solvent-based lines?
Which technical and service resources are available in-region for commissioning and ongoing maintenance support?

SUZHOU JWELL PLASTIC MACHINERY CO.,LTD.

Manufacturer of plastic extrusion lines (pipe, sheet/board, cast film, profile) and twin/single screw extruders for packaging and building materials.

BoothW5B01W5

About

Suzhou JWELL Plastic Machinery Co., Ltd. is headquartered in Taicang, Suzhou, Jiangsu, China, and was founded in 1997. The company employs approximately 2,300 people and sits within the JWELL Machinery group, which operates 14 production bases across China as well as facilities in Thailand, Spain, and Germany. Its product scope covers large-diameter HDPE and PVC double-wall corrugated and ribbed pipe extrusion lines, plastic sheet and board lines, cast film lines, window profile extrusion lines, and single and twin screw extruders in both conical and parallel configurations.

JWELL serves buyers in over 160 countries and regions and the group ships more than 3,000 extrusion lines per year. The company designs multilayer co-extrusion dies, hydraulic screen exchangers, and mirror rollers in-house, and holds the position of vice chairman unit of the China Plastic Machinery Industrial Association. In 2023 the group acquired Kautex Maschinenbau of Germany, extending its blow-molding technology portfolio alongside its core extrusion range.

At Interpack China 2026

At Interpack China 2026 in Shanghai, JWELL is present as an exhibitor covering its full extrusion line portfolio. Visitors focused on packaging can engage with the company on its sheet, board, and cast film extrusion lines, including multilayer co-extrusion configurations relevant to flexible and rigid packaging production. The company's twin and single screw extruder range is also within scope for buyers evaluating processing equipment for packaging-grade resins.

Plastic Sheet, Board and Cast Film Extrusion Lines including multilayer co-extrusion die configurationsJWSB Series Large-Diameter HDPE/PVC Double-Wall Corrugated and Ribbed Pipe Extrusion LineSingle and Twin Screw Extruders (conical and parallel) with hydraulic screen exchangersIn-house designed mirror rollers and co-extrusion dies2023 acquisition of Kautex Maschinenbau, Germany, adding blow-molding technology to the groupCast film extrusionCo-extrusion diesTwin screw extruderPipe extrusion

Why visit

Prioritize this stand if you are a packaging converter or sheet producer evaluating multilayer co-extrusion lines or screw extruder capacity from a manufacturer with a verified high-volume annual output.

What to ask at the booth

Which of your sheet and cast film lines are best suited to flexible packaging versus rigid board applications?
Can you configure a multilayer co-extrusion die for our specific resin combination and layer structure?
What lead time, installation, and commissioning support do you offer for export orders to our region?
How do energy consumption and throughput compare between your twin and single screw extruders for our target material?
What capabilities did the Kautex Maschinenbau acquisition add for customers who need blow-molding alongside extrusion?

NUEVOPAK GLOBAL LTD.

Designer and manufacturer of X-Series™ paper void-fill and cushioning protective packaging machines and converted paper systems.

BoothW2/W2G42W2

About

Nuevopak Global Ltd., founded in 2006 and headquartered in Hong Kong, designs and manufactures the X-Series range of paper-based protective packaging machinery. The company operates manufacturing subsidiaries in Jiangmen, China and Scheden, Germany, serving customers across North America, Europe, and Asia. Its product line spans the X-FILL A, X-FILL PRO, X-PAD+, X-PAD ECO, and X-WRAP systems, covering void-fill, cushioning, and manual wrapping applications.

Nuevopak was acquired by Intertape Polymer Group (IPG) in June 2021 for approximately $43.8 million, extending its reach through IPG's global distribution network. The X-Series machines are positioned as direct replacements for plastic and foam void-fill, converting kraft paper into protective packaging at throughput rates up to 415 ft per minute on the X-FILL PRO. The X-PAD+ cushioning system offers four control modes and a touch screen in both floor and table-top configurations, addressing operations where workstation footprint is a constraint.

At Interpack China 2026

Nuevopak is confirmed among the international exhibitors at interpack China 2026 at SNIEC Shanghai, 16 to 18 November 2026. No specific machine demonstrations for this event were published in advance of the show. Given the event's focus on sustainable and protective packaging, visitors can expect the stand to represent the full X-Series portfolio, covering paper void-fill and cushioning systems relevant to e-commerce fulfillment and distribution operations transitioning away from plastic materials.

X-FILL PRO dispensing at 415 ft per minute with 30-inch wide bundles for high-volume void-fill linesX-PAD+ four control modes and touch screen interface in compact floor and table-top configurationsX-FILL A available in floor and table-top models with adjustable height and angle settingsPaper-based X-Series systems as replacements for plastic foam and air-pillow void-fillIPG acquisition providing regional procurement channels across North America, Europe, and AsiaPaper void-fillCushioning systemsPlastic-to-paper transitionFulfillment automation

Why visit

Prioritize this stand if you manage an e-commerce fulfillment or distribution operation and are evaluating paper-based void-fill or cushioning machinery to replace plastic or foam materials at packing stations.

What to ask at the booth

What paper basis weights and ply configurations are supported on the X-PAD+ and X-FILL systems?
How does paper consumption cost per pack compare to plastic void-fill and air pillows at equivalent throughput?
What are service and spare-parts lead times for customers based in China, Germany, and North America?
Which IPG distribution channels are available for procurement in my region?
Is a live throughput demo or trial run possible at the stand using standard corrugate or kraft paper?

Super Dry Desiccant (Shenzhen) Co., Ltd.

Manufacturer of desiccant and moisture-damage prevention solutions including calcium chloride, silica gel, clay and container desiccants.

BoothW1F01W1

About

Super Dry Desiccant (Shenzhen) Co., Ltd. is headquartered in Shenzhen, Guangdong, with a parent operation founded in Singapore in 2000 and its Shenzhen factory established in 2005. The company employs approximately 550 people across four manufacturing facilities and more than 40 offices and distributor locations worldwide. Its product portfolio covers calcium chloride desiccants under the SUPER DRY brand, silica gel and clay desiccants under the INCUBIC brand, and high-capacity container desiccants for ocean freight, serving sectors including food, pharmaceuticals, consumer electronics, and export logistics.

The company holds more than 60 patents and claims a share exceeding 45 percent of the Chinese desiccant market as of 2025. Its self-developed calcium chloride formula uses a unidirectional breathable membrane to convert absorbed moisture into a contained, spillage-free gel, achieving absorption capacity above 300 percent of dry weight while remaining DMF-free. The certification portfolio spans ISO 9001, ISO 14001, IATF 16949, BRC, GMP, FDA, REACH, and DIN CERTCO registration through TÜV Rheinland, with clay and silica gel grades registered through to August 2028. Named supply relationships include Costco, LG, IKEA, Walmart, Maersk, OOCL, Tchibo, and Diageo.

At Interpack China 2026

At Interpack China 2026 in Hall W1, Super Dry Desiccant is presenting its moisture-proof packaging portfolio across three product lines. Visitors can examine the SUPER DRY calcium chloride desiccant with its gel-forming, leak-free absorption mechanism, the INCUBIC silica gel desiccant for chemically stable non-toxic moisture control, and the INCUBIC clay desiccant made from natural montmorillonite in FSC-certified, fully biodegradable kraft paper. The stand is positioned around protective packaging for ocean freight, food and pharma compliance, and sustainable packaging materials relevant to export and e-commerce logistics buyers.

SUPER DRY calcium chloride gel desiccant with unidirectional breathable membrane and greater than 300 percent moisture absorption capacityINCUBIC clay desiccant in FSC-certified, 100 percent biodegradable kraft paper packagingContainer desiccant DS/DP/DB 1000g series for humidity and dew-point suppression during ocean transitDIN CERTCO registrations (TÜV Rheinland) for clay and silica gel grades, valid through August 2028Cross-industry certifications covering IATF 16949 for automotive, BRC and GMP for food and pharma, and FDA and REACH for regulated marketsCalcium chloride desiccantContainer moisture controlBiodegradable clay desiccantDMF-free certified

Why visit

Prioritize this stand if you are sourcing certified, high-capacity desiccants for ocean freight containers or need DMF-free, food-contact-compliant moisture protection for food, pharmaceutical, or regulated consumer goods shipments.

What to ask at the booth

What is the verified moisture absorption capacity by percentage of dry weight for your calcium chloride desiccant under typical container transit conditions?
Can you provide DIN CERTCO and REACH documentation for the specific desiccant grade relevant to our cargo and destination market?
Which desiccant type and dosage do you recommend for our cargo category, route, and container size?
Do you supply food-contact or DMF-free grades with BRC and GMP documentation for food or pharmaceutical shipments?
What are the minimum order quantities, lead times, and ex-works pricing from the Shenzhen factory for both small-package and container desiccant formats?

Before you leave the hall

Capture what you need before the show closes

Interpack China 2026 runs only three days, and the window for face-to-face technical conversations with supplier engineers closes on 18 November. Before leaving Hall W1 each day, confirm that you have collected product data sheets, certification documents, and a direct contact name from each stand on your list. Post-show email threads are slower and less specific than an on-floor conversation.

For additional exhibitor research, venue maps, and event logistics, the TradeShowIntel event page for Interpack China 2026 is updated as new information is published by the organizer.

Interpack China 2026 on TradeShowIntel Official show website

Frequently asked questions

Planning this Interpack China 2026 route

When and where is Interpack China 2026?

Interpack China 2026 takes place 16 to 18 November 2026 at the Shanghai New International Expo Centre (SNIEC) in Shanghai, China.

Which hall should buyers prioritize for the exhibitors in this guide?

All five exhibitors in this Shared Spotlight are located in Hall W1. Buyers focused on bio-based materials, flexible packaging machinery, extrusion equipment, paper protective packaging, or desiccant solutions can concentrate their first session entirely within that hall.

Who is this guide written for?

This guide is written for packaging converters, brand owners, fulfillment and distribution managers, and logistics or quality managers who are actively evaluating suppliers in at least one of the following areas: renewable or bio-based packaging materials, laminating or metallizing machinery, multilayer extrusion lines, paper-based void-fill systems, or certified moisture-control products for regulated shipments.

How do I find the exact booth numbers for all five exhibitors?

Confirmed booth numbers available at the time of publication are Hall W1, W1P31 for Stora Enso and Hall W1, W1F01 for Super Dry Desiccant. Booth locations for Nordmeccanica, Jwell, and Nuevopak should be verified on the official exhibitor floor plan at interpack-cn.com before attending.

How do I contact the exhibitors in this guide before the show?

Each exhibitor card on this page includes company-specific contact information. Reaching out before the show to schedule a dedicated meeting time is advisable, particularly for machinery demonstrations at Nordmeccanica and Jwell, where floor demonstrations may draw multiple visitors at once.