5 Exhibitors to Visit at D&M West 2027

Paid placement disclosure. These exhibitor sections are paid Shared Spotlight placements. Inclusion is not an award, ranking, or TradeShowIntel endorsement, and it does not affect independent Floor Picks.Disclosure version 2026-09

What to expect at D&M West 2027

D&M West 2027 runs February 9 through 11 at the Anaheim Convention Center, a multi-hall venue that regularly hosts several hundred exhibitors across design, engineering, and advanced manufacturing categories. Three days sounds generous until a buyer accounts for keynotes, scheduled meetings, and the unavoidable time lost navigating between halls. Walking the full floor without a plan typically means covering the same ground twice and missing high-priority stands during peak congestion hours.

The five companies featured in this Shared Spotlight, Engel Austria GmbH, BASF, Carl Zeiss India (Bangalore) Pvt Ltd, Keyence Corporation, and MULTIVAC Laraon India Pvt. Ltd., collectively address a range of decisions that manufacturing buyers commonly need to advance at a show of this scale: injection molding capacity and cell control, specialty polymer and additive sourcing, dimensional and optical inspection, in-line sensor and vision system selection, and thermoforming or tray-sealing line evaluation. Grouping these stops into a single morning block reduces the risk of leaving Anaheim without the technical conversations that justify the trip.

Why these exhibitors

Five stands, four buyer functions, one morning

These five companies are not grouped because they share a product category. They are grouped because their combined coverage maps to decisions that a process engineer, materials engineer, quality engineer, or packaging manager is likely to be advancing at the same show. Engel Austria GmbH addresses injection molding equipment and autonomous cell control. BASF covers specialty polymers, polyurethane systems, and additive materials. Carl Zeiss India (Bangalore) Pvt Ltd brings dimensional inspection and optical measurement to the route. Keyence Corporation adds in-line vision, non-contact measurement, and laser marking. MULTIVAC Laraon India Pvt. Ltd. completes the set with thermoforming, tray-sealing, and vacuum packaging systems. A buyer who touches all five stands in a single session leaves with a clearer picture of their supply chain options across the full production chain, from raw material through finished-part verification and final packaging.

How to use this Shared Spotlight

Read each exhibitor card before you arrive Each card in this guide carries a 'why stop here' statement tied to a specific buyer role. Confirm which cards match your sourcing priorities so you can allocate time accordingly and skip stands that do not apply to your current projects.
Note booth numbers from the official floor plan Booth numbers were not confirmed at publication time. Before entering the Anaheim Convention Center, cross-reference each company name against the official D&M West 2027 exhibitor directory at mdmwest.com to get current locations and any hall assignments.
Block the route into a single morning session The five stands in this guide span complementary categories, so a buyer can move through all of them in sequence without doubling back across the hall. Target the first two hours after doors open, when booth staff are available and floor traffic is lighter.
Prepare one specific question per stand Several of these exhibitors, particularly Keyence and Carl Zeiss India, offer live application evaluations on the floor. Arriving with a defined part geometry, tolerance requirement, or production scenario will make those conversations more productive than a general product walkthrough.

Floor-planning tip Block 90 minutes on the morning of February 9 for this five-stand route, leaving the afternoon free for scheduled vendor meetings and any opportunistic stops that arise from floor conversations.

TL;DR

5 stops worth planning

Suggested floor route

Walk the route in card order to reduce backtracking

The card sequence moves from upstream process equipment through materials and into quality and packaging, which tends to follow the physical clustering of these categories on a design-and-manufacturing show floor and avoids crossing the hall more than once.

1Engel Austria GmbHPrioritize this stand if you are a process engineer or procurement manager sourcing all-electric or large-format injection molding capacity and want to evaluate AI-driven autonomous cell control alongside machine selection.Booth 4221
2BASFPrioritize this stand if you are a materials engineer or product developer sourcing specialty polymers, polyurethane systems, or functional additives for manufactured components.Booth 4371
3Carl Zeiss India (Bangalore) Pvt LtdPrioritize this stand if you are a quality engineer or manufacturing manager sourcing dimensional inspection or optical measurement capability for precision components in medtech, aerospace, or electronics production.
4Keyence CorporationPrioritize this stand if you are an automation or quality engineer sourcing in-line inspection, non-contact measurement, or part traceability solutions and want to work through a live application evaluation with a product specialist rather than a generalist sales representative.Booth 4121
5MULTIVAC Laraon India Pvt. Ltd.Prioritize this stand if you are a food, medical, or life-science packager evaluating thermoforming or tray-sealing lines and want to assess locally assembled equipment backed by a large global manufacturer.

Engel Austria GmbH

Global manufacturer of injection molding machines and integrated, automated production-cell solutions for thermoplastics, thermosets, and elastomers.

Booth4221

Read company profilePrioritize this stand if you are a process engineer or procurement manager sourcing all-electric or large-format injection molding capacity and want to evaluate AI-driven autonomous cell control alongside machine selection.Read more

About

ENGEL AUSTRIA GmbH, headquartered in Schwertberg, Upper Austria, has manufactured injection molding machinery since 1945 and remains 100% family-owned. With roughly 7,000 employees and up to 11 production plants across Europe, North America, and Asia, the company supplies machines and integrated production cells to processors in more than 85 countries. Its core product lines span the tie-bar-less victory electric series, the fully electric e-motion for precision and cleanroom work, and the large-format duo and duo speed two-platen hydraulic presses for automotive and high-output packaging.

ENGEL reported group turnover of approximately EUR 1.5 billion for financial year 2024/25 and holds a portfolio of more than 1,800 patents. The company positions itself as a single-source supplier covering machines, robots, and automation integration within one production cell. Its inject AI platform, introduced at K 2025 as the evolution of inject 4.0, enables autonomous, self-regulating cell operation using AI-supported process control, a capability the company describes as a world first in industrial injection molding.

At D&M West 2027

No confirmed ENGEL exhibitor listing has been found for D&M West 2027 at the Anaheim Convention Center. Visitors whose work involves all-electric precision molding, cleanroom production, or AI-driven process control may wish to contact ENGEL directly before the show to verify any presence or to arrange a pre-show conversation with their North American team.

ENGEL victory electric: tie-bar-less all-electric series, world premiere at K 2025ENGEL e-motion: fully electric machines for high-precision and cleanroom applicationsENGEL duo / duo speed: large two-platen hydraulic presses for automotive and packaginginject AI: AI-supported autonomous, self-regulating injection molding cellSingle-source production cells combining machines, robots, and integrated automationAll-electric moldingAutonomous process controlCleanroom-readyIntegrated automation

Why visit

Prioritize this stand if you are a process engineer or procurement manager sourcing all-electric or large-format injection molding capacity and want to evaluate AI-driven autonomous cell control alongside machine selection.

What to ask at the booth

Which machine series, victory electric, e-motion, or duo, fits our part geometry and material best?
How does inject AI reduce scrap and improve process stability on an existing line?
What automation and robotics configurations are available for a fully integrated production cell?
Can legacy ENGEL machines be retrofitted or upgraded rather than replaced outright?
What are current lead times and North American service coverage for a new press?

BASF

Specialty chemicals and materials for design and manufacturing applications

Booth4371

Read company profilePrioritize this stand if you are a materials engineer or product developer sourcing specialty polymers, polyurethane systems, or functional additives for manufactured components.Read more

About

BASF is one of the largest chemical producers in the world, supplying materials across a broad range of manufacturing sectors including plastics, coatings, adhesives, foams, and performance chemicals. The company serves industrial customers from research and development through to volume production.

For design and manufacturing buyers, BASF is particularly relevant as a supplier of engineering polymers, polyurethane systems, and specialty additives used in product development, tooling, and end-use parts. Its materials appear across industries from automotive and electronics to consumer goods and medical devices.

At D&M West 2027

No specific exhibit details for D&M West 2027 were confirmed at the time of publication. Given BASF's product scope, visitors at this show are likely to find materials relevant to additive manufacturing feedstocks, engineering thermoplastics, and functional coatings. Buyers working on material selection or supply chain qualification should verify booth details with show management before the event.

Engineering polymers and thermoplastic compounds for manufactured partsPolyurethane systems for tooling, casting, and structural applicationsSpecialty additives and coatings for surface performanceMaterials for additive manufacturing and rapid prototyping workflowsEngineering PolymersPolyurethanesSpecialty ChemicalsAM Materials

Why visit

Prioritize this stand if you are a materials engineer or product developer sourcing specialty polymers, polyurethane systems, or functional additives for manufactured components.

What to ask at the booth

Which engineering polymer grades are available for high-heat or structural applications in our production environment?
Do you offer technical support for material selection during the design phase?
What polyurethane systems do you supply for prototype tooling or short-run casting?
Are any of your materials qualified for medical device or automotive OEM programs?
What minimum order volumes apply to specialty or custom compound grades?

Carl Zeiss India (Bangalore) Pvt Ltd

Precision metrology, optical systems, and industrial quality measurement

Read company profilePrioritize this stand if you are a quality engineer or manufacturing manager sourcing dimensional inspection or optical measurement capability for precision components in medtech, aerospace, or electronics production.Read more

About

Carl Zeiss India (Bangalore) Pvt Ltd is the Indian subsidiary of Carl Zeiss AG, a German optics and optoelectronics manufacturer with operations spanning industrial metrology, semiconductor manufacturing technology, medical technology, and consumer optics. The Bangalore entity serves as a regional hub for sales, service, and application support across the Indian subcontinent.

Zeiss is recognized in manufacturing and quality engineering circles for coordinate measuring machines, optical measuring systems, and industrial microscopy tools used in precision component inspection. These products address tolerance verification demands in aerospace, automotive, medical device, and electronics production environments.

At D&M West 2027

D&M West draws engineers and quality managers sourcing precision measurement and inspection solutions for design and manufacturing workflows. Given Zeiss's product scope in coordinate metrology, optical sensors, and industrial imaging, visitors to their stand can expect to discuss dimensional inspection systems and how they integrate into production-floor quality processes relevant to West Coast manufacturing and medtech suppliers.

Coordinate measuring machines and CMM software for dimensional inspectionOptical and multisensor measuring systems for complex geometriesIndustrial microscopy and surface metrology toolsMetrology integration with manufacturing execution and quality management systemsApplication support for aerospace, medical device, and electronics sectorsMetrologyCMMOptical InspectionQuality Engineering

Why visit

Prioritize this stand if you are a quality engineer or manufacturing manager sourcing dimensional inspection or optical measurement capability for precision components in medtech, aerospace, or electronics production.

What to ask at the booth

Which coordinate measuring machine configurations are suited for high-mix, low-volume medical device inspection?
How do your optical sensors handle reflective or transparent surfaces common in optics and electronics parts?
What software connects your measurement systems to existing MES or quality management platforms?
What service and calibration support is available for customers based on the US West Coast?
Are there automation-ready CMM configurations for lights-out or near-lights-out inspection cells?

Keyence Corporation

Sensors, vision systems, measurement instruments, and laser markers for manufacturing and inspection

Booth4121

Read company profilePrioritize this stand if you are an automation or quality engineer sourcing in-line inspection, non-contact measurement, or part traceability solutions and want to work through a live application evaluation with a product specialist rather than a generalist sales representative.Read more

About

Keyence Corporation is a direct-sales manufacturer of factory automation components including photoelectric and fiber-optic sensors, machine vision systems, laser displacement sensors, coordinate measuring machines, digital microscopes, and laser marking systems. The company operates globally with regional subsidiaries serving discrete manufacturers across automotive, electronics, medical device, semiconductor, and consumer goods sectors.

Keyence sells exclusively through its own technical sales force rather than distributors, which means engineers at the stand are product specialists trained to scope applications on the spot. The company's product lines span the full inspection and identification workflow, from in-line vision inspection and dimensional gauging to part traceability via laser coding, giving a single-source option for facilities looking to consolidate sensor and measurement vendors.

At D&M West 2027

D&M West draws engineers and procurement leads focused on precision manufacturing, quality control, and production automation. Keyence's product scope maps directly to those priorities, and visitors can expect the stand to feature hands-on demonstrations of vision inspection systems, laser displacement and profilometer measurement, digital microscopy for defect analysis, and laser marking for part identification. The direct-sales model means application engineers on the floor can work through a specific measurement or inspection challenge during the visit rather than scheduling a follow-up.

Machine vision systems for in-line defect detection and part verificationLaser displacement sensors and 3D profilometers for non-contact dimensional measurementCoordinate measuring machines and wide-area 3D measurement for QC labsDigital microscopes for surface and defect analysisLaser markers for part traceability and permanent codingVision InspectionLaser MeasurementLaser MarkingSensors

Why visit

Prioritize this stand if you are an automation or quality engineer sourcing in-line inspection, non-contact measurement, or part traceability solutions and want to work through a live application evaluation with a product specialist rather than a generalist sales representative.

What to ask at the booth

Which vision system configurations handle reflective or irregular surfaces common in our parts?
How does your laser displacement sensor handle measurement on curved or dark substrates?
What communication protocols do your sensors and vision systems support for PLC and MES integration?
Can your application engineers benchmark a measurement task against our current gauging method during the show?
What are the typical deployment timelines and support structures for facilities without dedicated vision engineers?

MULTIVAC Laraon India Pvt. Ltd.

Sales and after-sales provider of thermoforming, tray-sealing, vacuum chamber, labelling and inspection packaging systems for the Indian market.

Read company profilePrioritize this stand if you are a food, medical, or life-science packager evaluating thermoforming or tray-sealing lines and want to assess locally assembled equipment backed by a large global manufacturer.Read more

About

MULTIVAC Laraon India Pvt. Ltd. is a joint venture established in 2009 between the Germany-based MULTIVAC Group and the LARAON Group, headquartered in New Delhi, India. The company serves as the sales and after-sales arm for MULTIVAC packaging systems in the Indian market, offering R Series thermoforming machines, T Series automatic tray sealers, vacuum chamber machines, and integrated labelling, inspection, and automation systems across food, medical, consumer, and industrial segments.

In December 2023, a dedicated local production entity, MULTIVAC Laraon Production India Pvt. Ltd., opened an assembly site in Gihloth, Rajasthan, reducing delivery times for thermoformers, tray sealers, format sets, and tooling for customers across India, Sri Lanka, and Bangladesh. The operation draws on the broader MULTIVAC Group, which employs approximately 7,800 people across roughly 85 sites worldwide and reported turnover of approximately EUR 1.59 billion, providing buyers access to a deep global engineering base through a locally accountable partner.

At D&M West 2027

No confirmed exhibit listing for MULTIVAC Laraon India at D&M West 2027 was found in the official MD&M West exhibitor directory. Visitors with packaging line requirements spanning thermoforming, tray sealing, or integrated inspection should verify the company's participation directly before planning a stand visit. The company's product scope, covering food-safe and medical-grade packaging machinery with local Indian assembly and service, is relevant to medical device and life-science packagers attending this show.

R Series thermoforming machines (R 081, R 085, R 105 MF) with local assembly at Gihloth, RajasthanT Series automatic tray sealers (T 200, T 300, T 600, T 800) for food and non-food rigid-film traysVacuum chamber machines for shelf-life extension of perishable productsIntegrated labelling, printing, and quality inspection systems for complete packaging linesLocal after-sales service and spare-parts support backed by MULTIVAC Group global engineeringThermoformingTray SealingVacuum PackagingLine Automation

Why visit

Prioritize this stand if you are a food, medical, or life-science packager evaluating thermoforming or tray-sealing lines and want to assess locally assembled equipment backed by a large global manufacturer.

What to ask at the booth

Which thermoforming models (R 081, R 085, R 105 MF) are assembled locally in Gihloth versus imported?
What are current delivery lead times and spare-part availability for customers in this region?
Can you provide a reference from a food, dairy, or medical packager using your tray sealers?
What labelling, inspection, and automation options integrate with your thermoformers for a complete line?
Do you offer service and maintenance contracts for entry-level R Series machine users?

Before you leave the hall

Capture contacts and confirm follow-up dates before February 11

The close of a three-day show compresses quickly. Before leaving the Anaheim Convention Center on February 11, confirm a specific follow-up date with each stand that produced a substantive conversation. Booth staff at shows of this size typically carry a full meeting queue, and a vague 'we'll be in touch' rarely results in a timely next step.

For broader event coverage, exhibitor updates, and additional Shared Spotlight guides for D&M West 2027, visit the TradeShowIntel event page linked below.

D&M West 2027 on TradeShowIntel Official D&M West 2027 website

Frequently asked questions

Planning this D&M West 2027 route

When and where is D&M West 2027?

D&M West 2027 runs February 9 through 11, 2027, at the Anaheim Convention Center in Anaheim, California. The official event website is mdmwest.com.

Who is this Shared Spotlight guide written for?

The guide is written for buyers, engineers, and procurement managers attending D&M West 2027 who want a pre-planned route covering injection molding, specialty materials, precision metrology, in-line inspection, and packaging systems. It is most relevant to process engineers, materials engineers, quality engineers, and packaging or operations managers.

Which halls or areas of the Anaheim Convention Center should I prioritize?

Hall assignments for D&M West 2027 were not confirmed at the time this guide was published. Check the official exhibitor directory at mdmwest.com before arriving to get current booth numbers and hall locations for Engel Austria GmbH, BASF, Carl Zeiss India, Keyence Corporation, and MULTIVAC Laraon India.

How do I contact the exhibitors featured in this guide?

Each exhibitor card in this Shared Spotlight includes company details. For direct contact before the show, visit each company's website or reach out through the D&M West 2027 official exhibitor listing at mdmwest.com, where registered exhibitors typically publish booth contact information.

Does inclusion in this guide mean these are the only exhibitors worth visiting at D&M West 2027?

No. This guide covers five companies that paid for placement in this Shared Spotlight. D&M West 2027 features many additional exhibitors across all categories. This route is a starting point for a deliberate first-day visit, not a comprehensive ranking of the show floor.