Exclusive Spotlight

    Caterpillar at WorkBoat Show 2026: Cat Marine Power

    Separate propulsion duty, onboard electrical loads and condition monitoring before comparing a marine-power package for a new vessel or repower.

    Exclusive Spotlight2-4 December 2026New OrleansBooth 2801
    Website

    8 min read · New Orleans · 2-4 December 2026

    2-4 December 2026
    International WorkBoat Show 2026Ernest N. Morial Convention Center · New OrleansBooth 2801
    Editor's Pick

    Three decisions behind a workable marine-power proposal

    An independent TradeShowIntel editorial feature for event meeting preparation. Caterpillar's official WorkBoat Show 2026 floor-plan entry lists booth 2801. For an owner, yard or marine engineer, the meeting is most useful when it connects the vessel's operating profile to a defined propulsion and electrical-power scope. This shortlist uses current Cat product pages for C18 commercial propulsion and C7.1 marine generation, then adds the monitoring and service discussion needed after installation. Bring the vessel duty and installation constraints; model names alone are not enough to select a rating or define a repower.

    • C18 commercial propulsion is a starting point for a vessel-duty and installation discussion, not a universal engine selection.
    • C7.1 marine generation requires a separate electrical-load, frequency and installation assessment.
    • Marine monitoring needs an agreed data path, alert owner and service response to be useful to the fleet.
    TL;DR

    The visit in brief

    1. For commercial-vessel owners, fleet technical teams, shipyards and naval architects.
    2. The shortlist separates propulsion, onboard generation and the monitoring/service workflow.
    3. Caterpillar is listed at booth 2801 in the official 2026 floor plan.
    4. Bring duty-cycle information, machinery-space constraints and the vessel's electrical-load schedule.
    5. The International WorkBoat Show runs 2–4 December 2026 at the Ernest N. Morial Convention Center, New Orleans.

    Caterpillar Inc.

    Separate propulsion duty, onboard electrical loads and condition monitoring before comparing a marine-power package for a new vessel or repower.

    Headquarters
    Irving, Texas, United States
    Industry
    Commercial marine
    Founded
    1925
    Website
    https://www.cat.com
    Event
    International WorkBoat Show 2026
    Dates
    2-4 December 2026
    Booth
    Booth 2801
    Key products
    • Cat C18 commercial propulsion
    • Cat C7.1 marine generator set
    • Cat marine monitoring services
    Exhibitor briefing

    Define the vessel requirement before the engine package

    Caterpillar's marine business supplies Cat propulsion engines, generator sets and supporting services through its dealer network. The relevant purchase is a configuration integrated into a vessel, with installation, controls, maintenance access and operating support considered alongside the engine or genset.

    For propulsion, describe how the vessel works: time at different loads and speeds, manoeuvring demands, transmission and propulsor arrangements, and operating waters. For generation, provide the electrical loads, frequency and intended redundancy. These inputs guide the proposed configuration and expose work that belongs to the yard or system integrator.

    Use current model documentation. Caterpillar's legacy catalogue marks the earlier C18 ACERT IMO II listing as non-current; this profile instead links to the current C18 commercial-propulsion page and current C7.1 genset page. The products are researched portfolio topics for a meeting, not a claim that these exact configurations will be displayed at the show.

    Buyer fit

    Where this conversation earns its place

    Prepare vessel duty and operating waters, existing machinery and transmission details, installation constraints, electrical loads and the planned maintenance window.

    Good fit if you

    • Plan a commercial-vessel newbuild or repower with a documented operating profile.
    • Need to assess machinery-space, cooling, exhaust and service-access implications of a proposed package.
    • Specify onboard generation from an electrical-load schedule and redundancy requirement.
    • Want a defined dealer and fleet-monitoring support model for the vessel's operating area.

    Skip if

    • Need an engine selected solely by a headline horsepower number without vessel-duty information.
    • Treat a legacy model listing as confirmation of current supply or direct replacement compatibility.
    • Expect digital monitoring to establish vessel availability without agreeing sensors, connectivity, response and maintenance responsibilities.

    TSI buyer-fit guidance; confirm the proposed configuration and local supply directly with the exhibitor.

    Product and service shortlist

    Propulsion, generation and operational follow-through

    The following current Cat offerings support different vessel decisions. Confirm rating, market availability, installation scope and any show demonstration directly with the marine team.

    Cat C18 commercial propulsionCat C7.1 marine generator setCat marine monitoring and Remote Fleet Vision

    Cat C18 commercial propulsion

    The current C18 commercial-propulsion page describes an inline six-cylinder diesel platform for workboat applications, with heat-exchanger and keel-cooled configurations and electronic diagnostics. For a repower discussion, the useful comparison is the proposed engine rating against the vessel's real load profile and installation. Bring the existing engine and transmission details, available space, cooling arrangement and service-access restrictions. Ask the team to identify the configuration and the supporting performance and installation documents. The outcome should be an engineering basis for the proposal, including what changes around the engine. A product-family image or broad emissions list does not establish that a specific supplied arrangement fits the vessel and its operating requirements.

    Cat C7.1 marine generator set

    The current C7.1 marine-genset page lists 50- and 60-Hz configurations, multiple cooling and control options, and optional selective catalytic reduction for the stated IMO III configuration. A yard or fleet engineer should start with the electrical-load schedule, starting loads, intended redundancy and machinery-space arrangement. Ask which rating and generator configuration are proposed, how load sharing would be implemented where required and what installation allowances are needed for cooling, exhaust and access. The useful follow-up is a defined genset and integration scope. Keep generator selection separate from propulsion horsepower, and request the applicable technical and emissions documents for the configuration being offered.

    Cat marine monitoring and Remote Fleet Vision

    Cat's marine-services page describes access to fleet information, monitoring and configurable alerts through its digital-service offer, including Remote Fleet Vision. For an operator, the first question is how an observation becomes an action. Choose an engine condition the fleet already tracks and ask which sensors and onboard equipment supply the data, how it reaches shore and who receives an alert. Define what the crew, fleet office and supporting dealer do next, including when connectivity is interrupted. The useful result is a responsibility and escalation map with the proposed service scope. Monitoring should be evaluated as part of maintenance practice, without promising that software alone will prevent a failure or guarantee vessel uptime.

    Evaluation signals

    Evidence that makes the follow-up assessable

    Use these points when comparing the technical follow-up with the requirement you supplied.

    Engineering basis

    A configuration tied to vessel duty

    Request the rating, installation assumptions and supporting documents used for the actual operating profile.

    Integration

    A yard and supplier responsibility split

    Identify who owns cooling, exhaust, mounts, controls, electrical integration and commissioning checks.

    Support

    A service route for the operating area

    Agree parts support, planned maintenance, monitoring ownership and escalation with the supplying dealer and fleet team.

    Engineering basisIntegrationSupport

    Request the rating, installation assumptions and supporting documents used for the actual operating profile. Agree parts support, planned maintenance, monitoring ownership and escalation with the supplying dealer and fleet team.

    Company Background

    A century-old equipment business with marine applications

    Caterpillar was formed in 1925 through the merger of Holt Manufacturing and C.L. Best Tractor Co.; its corporate headquarters are in Irving, Texas. Its engine and power-systems activities serve marine applications alongside a wider industrial and equipment business. For a WorkBoat visitor, the practical value of that scale depends on the proposed marine configuration and the dealer organisation that will support it. The project discussion should identify the supplying party, vessel-integration responsibilities and service coverage instead of treating the corporate brand as a complete delivery plan. Image source: Caterpillar Inc. published product materials.

    Suggested meeting plan

    Prepare the technical conversation

    Suggested visitor preparation; appointment availability must be agreed with the exhibitor.

    Before the visit

    Prepare the relevant inputs

    1. Before requesting a meeting

      Prepare vessel duty and operating waters, existing machinery and transmission details, installation constraints, electrical loads and the planned maintenance window.

    At the event and after

    Test the scope and record responsibilities

    1. During the technical discussion

      Trace the proposed propulsion or genset configuration through cooling, exhaust, controls, access and commissioning; then follow one monitoring alert from vessel to responsible person.

    2. Agreed follow-up

      Request the proposed ratings and configurations, installation drawings, applicable technical documents, scope exclusions, commissioning plan and dealer support contact.

    Meeting questions

    Five questions for Caterpillar Inc.

    Use the questions that match your proposed application and ask for answers tied to that specific scope.

    1. Which C18 rating and configuration fits our documented duty cycle, and what performance and installation documents support it?

      A valid propulsion proposal depends on load, speed and integration assumptions that a family-level power range cannot resolve.

    2. For this repower, which changes to cooling, exhaust, mounts, transmission and controls are included or excluded?

      The surrounding vessel work can determine schedule and cost even when the replacement engine appears similar in size.

    3. Which C7.1 genset configuration meets our load schedule, frequency and redundancy plan, including any required aftertreatment?

      This separates electrical-power design from propulsion selection and makes the proposed generator package assessable.

    4. What data and connectivity support the monitoring offer, and who acts when a threshold is exceeded or communication is lost?

      Monitoring has operational value only when the crew, fleet office and dealer know how to interpret and respond to the information.

    5. Which dealer will own commissioning and service for our operating area, and what parts and response arrangements can be agreed?

      A named delivery and support route makes the equipment proposal concrete beyond the show-floor discussion.

    Event details

    Plan the visit in New Orleans

    Booth: 2801

    Venue: Ernest N. Morial Convention Center

    Dates: 2-4 December 2026

    International WorkBoat Show 2026 takes place 2-4 December 2026 at Ernest N. Morial Convention Center, New Orleans. The reviewed source lists Booth 2801.

    Prepare vessel duty and operating waters, existing machinery and transmission details, installation constraints, electrical loads and the planned maintenance window.

    Official event information

    Organizer participation source

    Next step

    Send a defined requirement to Caterpillar Inc.

    Request the proposed ratings and configurations, installation drawings, applicable technical documents, scope exclusions, commissioning plan and dealer support contact.

    Website
    Practical questions

    Practical questions before the visit

    Where is Caterpillar listed for WorkBoat Show 2026?

    The official 2026 floor plan lists Caterpillar at booth 2801. The show runs 2–4 December at the Ernest N. Morial Convention Center in New Orleans. Reconfirm the current floor plan before the visit.

    Which C18 listing does this profile use?

    It uses Cat's current commercial-propulsion product page. The older C18 ACERT IMO II catalogue entry is marked non-current and is not presented as the current offer.

    Is the C7.1 a propulsion engine in this shortlist?

    The linked C7.1 is a marine generator set for onboard electrical power. It requires a separate load and installation assessment from a propulsion engine.

    Are these exact products confirmed show exhibits?

    The floor plan confirms Caterpillar's participation and booth. A display or demonstration schedule for these specific configurations has not been verified; arrange the relevant marine specialist directly.

    What should an owner bring to a repower meeting?

    Bring the vessel's duty profile, operating waters, current engine and transmission details, machinery-space limits and maintenance window. Add an electrical-load schedule if generation is part of the project.