Exclusive Spotlight

    Bosch at Automechanika Shanghai 2026: Workshop Diagnostics

    For workshop buyers, distinguish the vehicle interface, diagnostic software and ADAS calibration equipment before comparing a complete service-bay proposal.

    Exclusive Spotlight2-5 December 2026Shanghai
    Website

    9 min read · Shanghai · 2-5 December 2026

    2-5 December 2026
    Automechanika Shanghai 2026National Exhibition and Convention Center (Shanghai) · Shanghai
    Editor's Pick

    Turn a workshop requirement into a defined equipment scope

    An independent TradeShowIntel editorial feature for event meeting preparation. Bosch is listed among Automechanika Shanghai 2026's key exhibitors, and the organiser's release mentions chassis-system solutions. For visitors buying workshop diagnostics, that confirmed presence is an opportunity to request the appropriate Bosch specialist and discuss a wider aftermarket requirement. This shortlist separates a vehicle communication interface, its diagnostic software and a calibration system. It does not claim those three products are confirmed stand exhibits. Bring the actual vehicles and jobs your workshop wants to service, then verify the locally supplied configuration.

    • KTS 560 provides the vehicle communication interface; a working diagnostic setup also needs compatible software and a host computer.
    • ESI[tronic] supplies diagnostic and repair information through licensed packages whose coverage must match the workshop's market.
    • DAS 3000 S20 introduces a separate equipment, target and procedure decision for front-camera and radar calibration.
    TL;DR

    The visit in brief

    1. For workshop owners, diagnostic technicians and collision-repair businesses planning equipment purchases.
    2. Compare three layers: KTS 560 hardware, ESI[tronic] software and DAS 3000 S20 calibration equipment.
    3. Product descriptions use official Bosch UK-market pages; Chinese-market availability, licences and coverage require confirmation.
    4. Bosch's Shanghai participation is confirmed, but the reviewed sources do not establish a demo schedule for this equipment shortlist.
    5. Automechanika Shanghai runs 2–5 December 2026 at the National Exhibition and Convention Center (Shanghai).

    Bosch

    For workshop buyers, distinguish the vehicle interface, diagnostic software and ADAS calibration equipment before comparing a complete service-bay proposal.

    Headquarters
    Gerlingen-Schillerhöhe, Germany
    Industry
    Automotive aftermarket
    Founded
    1886
    Website
    https://www.boschaftermarket.com
    Event
    Automechanika Shanghai 2026
    Dates
    2-5 December 2026
    Key products
    • KTS 560 diagnostic interface
    • ESI[tronic] diagnostic software
    • DAS 3000 S20 calibration equipment
    Exhibitor briefing

    The diagnostic job determines the purchase

    Bosch's Mobility Aftermarket business supplies parts, diagnostic equipment, software and workshop services. For a diagnostic-equipment buyer, these are connected purchasing decisions: the interface communicates with the vehicle, the software supports the diagnostic task and additional equipment may be required for measurement or calibration.

    A workshop comparing packages should begin with a job list and a sample of the vehicles it actually services. Fault-code access, guided troubleshooting, programming access and an ADAS calibration procedure are different requirements. Confirm the functions supported for the relevant model, year and market before treating broad brand coverage as evidence of a complete solution.

    The product links below lead to official UK-market documentation. They provide a verifiable description of the offerings but do not establish China-market supply, subscription terms or support. At the Shanghai meeting, ask which local products and software packages meet the same requirement, who supplies them and where technician training and service are delivered.

    Buyer fit

    Where this conversation earns its place

    Prepare a sample vehicle list with model years and regional specifications, the jobs to be performed, the workshop's computers and network, and any proposed calibration bay.

    Good fit if you

    • Run a workshop that needs a defined multi-brand diagnostic workflow.
    • Want to compare a vehicle interface and software package against actual model-year coverage.
    • Plan to add camera or radar calibration and can assess the required bay, targets and procedures.
    • Need to identify local supply, training, software entitlement and equipment support before purchase.

    Skip if

    • Only seek a chassis-parts quotation; request the parts specialist rather than using this equipment shortlist.
    • Assume a UK product page establishes Chinese-market availability or identical licensing.
    • Expect a single interface or calibration frame to support every vehicle and service operation without checking the application.

    TSI buyer-fit guidance; confirm the proposed configuration and local supply directly with the exhibitor.

    Product and service shortlist

    Three layers of a workshop diagnostics proposal

    These are researched Bosch portfolio options, not a confirmed Shanghai display list. Evaluate the required combination and ask the local team to identify the appropriate market-specific offer.

    KTS 560ESI[tronic]DAS 3000 S20

    KTS 560: the vehicle communication interface

    The KTS 560 is a diagnostic interface designed to work with licensed ESI[tronic] software on a compatible Windows computer. Its published features include Diagnostics over Internet Protocol, a PassThru interface and a one-channel multimeter. A technician comparing it for routine diagnosis should bring representative vehicles and the intended operations, then establish which cables, adapters and computer are needed. For programming work, ask separately about the applicable manufacturer software, access and procedures. The useful purchase scope identifies the interface, software, accessories and support together; owning the communication hardware alone does not establish coverage or permission for every diagnostic or programming task.

    ESI[tronic]: software, repair information and entitlement

    ESI[tronic] is Bosch's diagnostic software for vehicle servicing and repair. The official passenger-car page describes diagnostic functions, guided troubleshooting and repair information, with different package contents and internet-dependent services. A workshop manager could test the proposed package against several common jobs: identifying a vehicle, following a fault through diagnostic data and finding the corresponding repair information. Confirm the vehicle and regional coverage, account requirements, update arrangements and any additional services in the local offer. The outcome should be a package-and-function matrix for the workshop's vehicles, so that a broad catalogue or brand count does not substitute for the operations technicians need to complete.

    DAS 3000 S20: the calibration setup around the vehicle

    The DAS 3000 S20 is a computer-based calibration and adjustment device for front cameras and radar sensors. Bosch describes camera-based positioning relative to the vehicle's thrust line and a fixture system for different calibration targets. For a collision-repair shop, the meaningful evaluation begins with the vehicle procedures it intends to perform and the space in which the equipment will operate. Ask the supplier to identify the required targets, diagnostic software, setup conditions and documented result for those applications. The frame, target selection and diagnostic procedure form one workflow; equipment purchase alone is not evidence that a workshop can correctly calibrate every supported driver-assistance system.

    Evaluation signals

    Evidence that makes the follow-up assessable

    Use these points when comparing the technical follow-up with the requirement you supplied.

    Coverage

    Functions checked against actual vehicles

    Confirm model, year, regional specification and required operation, rather than relying on a worldwide brand-count claim.

    Ownership cost

    A complete package breakdown

    Separate the hardware purchase from subscriptions, optional services, targets, adapters and technician preparation.

    Delivery

    A local support and training route

    Establish who supplies, installs, maintains and supports the chosen market-specific configuration.

    CoverageOwnership costDelivery

    Confirm model, year, regional specification and required operation, rather than relying on a worldwide brand-count claim. Establish who supplies, installs, maintains and supports the chosen market-specific configuration.

    Company Background

    A long automotive history, a specific aftermarket requirement

    Robert Bosch founded the business in Stuttgart in 1886; Robert Bosch GmbH is headquartered in Gerlingen-Schillerhöhe, Germany. The group's automotive activities extend well beyond workshop equipment, so a Shanghai visitor should identify the correct business and specialist for the requirement. This article concentrates on the Mobility Aftermarket diagnostic workflow rather than treating the whole Bosch portfolio as one offer. The organiser's reference to chassis solutions confirms an event theme for Bosch, while the diagnostic shortlist provides a separate, explicitly qualified agenda for a workshop buyer. Photo: Bosch. Product imagery and logo: Bosch.

    Suggested meeting plan

    Prepare the technical conversation

    Suggested visitor preparation; appointment availability must be agreed with the exhibitor.

    Before the visit

    Prepare the relevant inputs

    1. Before requesting a meeting

      Prepare a sample vehicle list with model years and regional specifications, the jobs to be performed, the workshop's computers and network, and any proposed calibration bay.

    At the event and after

    Test the scope and record responsibilities

    1. During the technical discussion

      Walk through one diagnostic job and, if relevant, one calibration procedure; identify every hardware, software, target, access and technician dependency.

    2. Agreed follow-up

      Request the local configuration, application coverage, itemised licence and equipment costs, training, installation requirements and service contact.

    Meeting questions

    Five questions for Bosch

    Use the questions that match your proposed application and ask for answers tied to that specific scope.

    1. For these model years and regional vehicle specifications, which diagnostic and service functions does the local package support?

      This converts general vehicle coverage into a list of operations relevant to the workshop's actual customer base.

    2. What is included with the interface, and what software, computer, adapters or manufacturer access must we obtain separately?

      A complete bill of requirements prevents hardware comparisons from omitting essential parts of the workflow.

    3. Which ESI[tronic] package, accounts, internet services and renewal terms apply in our market?

      Regional entitlement and package content affect what technicians can use after the equipment is installed.

    4. For the ADAS procedures we intend to offer, which targets, bay conditions and reporting steps are required?

      The calibration device must fit a controlled working process and the vehicle-specific procedure, not simply the available floor space.

    5. Who provides local installation, practical training, updates and fault escalation for this configuration?

      The workshop needs a delivery and support owner who can keep the purchased system usable as vehicle and software requirements change.

    Event details

    Plan the visit in Shanghai

    Venue: National Exhibition and Convention Center (Shanghai)

    Dates: 2-5 December 2026

    Automechanika Shanghai 2026 takes place 2-5 December 2026 at National Exhibition and Convention Center (Shanghai), Shanghai. A stand number has not been verified for this profile; confirm the current location before arranging a visit.

    Prepare a sample vehicle list with model years and regional specifications, the jobs to be performed, the workshop's computers and network, and any proposed calibration bay.

    Official event information

    Organizer participation source

    Next step

    Send a defined requirement to Bosch

    Request the local configuration, application coverage, itemised licence and equipment costs, training, installation requirements and service contact.

    Website
    Practical questions

    Practical questions before the visit

    Is Bosch confirmed for Automechanika Shanghai 2026?

    Yes. The organiser lists Bosch among the 2026 key exhibitors and mentions chassis-system solutions in its event release. The show runs 2–5 December at the National Exhibition and Convention Center (Shanghai).

    Are KTS 560, ESI[tronic] and DAS 3000 confirmed stand demonstrations?

    The reviewed Shanghai sources do not confirm that equipment display or a demonstration schedule. Arrange the relevant aftermarket specialist and desired product discussion directly with Bosch.

    Why do the product links lead to UK-market pages?

    They are official, readable descriptions of the named products. They are not evidence of Chinese-market availability, identical software coverage or local licence terms; request the applicable local offer.

    Is the KTS interface a complete diagnostic package by itself?

    The KTS 560 product page describes use with licensed ESI[tronic] software and a compatible computer. The buyer should also identify cables, adapters, access and support for the intended jobs.

    What should an ADAS equipment buyer prepare?

    List the vehicle procedures to be offered, the proposed working bay and existing diagnostic equipment. Ask for the required targets, positioning process, training and documentation for those applications.