Digital buyer journeys
What digital buyer journeys means for buyers and exhibitors in this sector.
Event overview
Overview
The World Concrete Cutting Summit is the premier global event for the concrete cutting industry, scheduled for May 19-21, 2027, at the Stockholm Waterfront Congress Centre. This summit will gather professionals from around the world to discuss innovations, share knowledge, and network.
Attendees will include contractors, suppliers, and industry experts focused on the latest technologies and methods in concrete cutting and demolition. World Concrete Cutting Summit takes place in Stockholm,.
TL;DR
- 1Dates and Venue: World Concrete Cutting Summit runs from May 19-21, 2027, at Stockholm Waterfront Congress Centre, Sweden.
- 2Scale and Focus: This summit is a key event for the international concrete cutting industry, attracting global participants.
- 3Organiser: The event is organised by SCOP Publishing, known for their expertise in the demolition sector.
- 4Buyer Authority: Attendees include concrete cutting contractors, suppliers, and industry professionals.
- 5Entry: Registration is available online, with further details to be confirmed.
Why visit
Attending the World Concrete Cutting Summit provides an opportunity to network with industry leaders and gain insights into the latest technologies and methods in concrete cutting. Participants will benefit from expert presentations and discussions on current trends and challenges in the industry.
Why exhibit
Exhibiting at the World Concrete Cutting Summit allows companies to showcase their products and services to a targeted audience of industry professionals. This event offers a unique platform for networking, generating leads, and enhancing brand visibility in the concrete cutting sector. Meet qualified buyers and partners including Manufacturers of concrete cutting tools and machinery, Suppliers of demolition equipment, Companies offering concrete surface preparation.
Attendees, exhibitors & solutions
Who this event is for
Visitor profile
Typical attendee groups you can expect to meet.
Concrete cutting and drilling contractors comparing wall saws, wire saws and core rigs for structural openings, shafts and refurbishment work
Demolition and dismantling specialists sourcing remote-controlled demolition robots, breakers and crushers for constrained or unsafe areas
Surface preparation and floor finishing crews assessing diamond grinding, scarifying, shot blasting and polishing systems
Diamond tooling buyers (blades, core bits, wire beads) benchmarking segment life and cost per cut on reinforced concrete
Dust, slurry and silica-compliance leads from contracting firms responsible for water suppression, HEPA extraction and containment
Infrastructure, tunnelling and bridge-maintenance contractors specifying cutting scope where access and noise limits are tight
Equipment distributors, rental fleets and Nordic dealer groups evaluating lines to represent in Sweden, Norway, Denmark and Finland
Safety, training and certification managers responsible for concrete cutting crews and on-site exposure controls
Exhibitor profile
Main supplier and exhibitor segments present at the show.
Manufacturers of wall saws, wire saws, ring saws and track-guided cutting systems for reinforced and mass concrete
Diamond tooling producers supplying blades, core bits, wire beads and segment formulations for different aggregate and rebar densities
Remote-controlled demolition robot and attachment makers offering breakers, crushers, grapples and buckets
Surface preparation machine suppliers covering grinders, scarifiers, shot blasters, milling units and floor polishers
Dust extraction, HEPA filtration, slurry separation and water-recycling system providers aimed at silica and wash-water compliance
Concrete scanning, GPR and cut-planning technology suppliers selling into contractors who must verify rebar and post-tension layouts before cutting
Hydraulic power pack, hose, rig and lifting/handling equipment suppliers supporting cutting crews on site
Training, certification, PPE and safety-service providers serving Nordic concrete cutting and demolition contractors
Product categories
Key solution areas showcased across the event.
Wall saws, wire saws, ring saws and track-guided cutting systems for structural openings, facades and foundations
Core drilling rigs, diamond core bits, anchors, stands and vacuum bases
Diamond blades, wire beads and segment tooling for reinforced concrete, green concrete and abrasive aggregates
Remote-controlled demolition robots, hydraulic breakers, crushers and concrete-processing attachments
Grinding, scarifying, shot-blasting, milling and polishing equipment for concrete floors and surfaces
Dust extraction and HEPA filtration units, water suppression kit and slurry separators or recycling systems
Concrete scanning, ground-penetrating radar and cut-planning software for rebar and embedded-services detection
Hydraulic power packs, hoses, quick-couplers and lifting or handling aids for cutting rigs
Location & Facilities
Venue
Stockholm Waterfront Congress Centre
Stockholm, Sweden
Facilities
Parking
Stockholm Waterfront Congress Centre in Stockholm typically provides on-site or adjacent visitor parking during major trade fairs; confirm daily rates, payment methods and hall access on the organiser or venue website before travel.
Food options
On-site catering
On-site diningParking: Stockholm Waterfront Congress Centre in Stockholm typically provides on-site or adjacent visitor parking during major trade fairs; confirm daily rates, payment methods and hall access on the organiser or venue website before travel.
Gate: Follow organiser signage to the main visitor entrance at Stockholm Waterfront Congress Centre for badge collection; allow extra time for security screening during peak morning arrival.
Attend
Entry & tickets
Who runs the show
Organisers
SCOP Publishing
Intelligence
Market context
Key market insights, trends, news and related events to help you understand the bigger picture.
Stockholm, Sweden
Why it matters
Attending World Concrete Cutting Summit on 2027-05-19 to 2027-05-21 in Stockholm lets buyers and specifiers benchmark suppliers, see live demonstrations, and compress months of vendor meetings into one focused trade visit — worthwhile when your category roadmap aligns with the official exhibitor profile.
Industry trends
Key trends shaping this market and its wider industry.
Sustainability in procurement
What sustainability in procurement means for buyers and exhibitors in this sector.
Automation and labour efficiency
What automation and labour efficiency means for buyers and exhibitors in this sector.
Regional supply-chain resilience
What regional supply-chain resilience means for buyers and exhibitors in this sector.
Hybrid engagement models
What hybrid engagement models means for buyers and exhibitors in this sector.
Plan your trip
Travel & logistics
Arrival airports
Choose from the following airports, with convenient access to the event and venue.
Stockholm Arlanda
ARN is the main international gateway for the summit and the airport used by the flight samples. Arlanda Express is the fastest transfer, SL commuter rail and Flygbussarna coaches are the cheaper options, and major taxi operators run fixed-price airport trips
Approx. 40 km north of central Stockholm
to venue
Approx. 40-50 min by road outside peak; about 20 min by Arlanda Express to Stockholm Central plus a 5-8 min walk
by car
Stockholm Bromma
BMA handles mostly domestic and limited European traffic, so international visitors usually arrive at ARN. If you land at Bromma, the bus plus metro combination drops you at T-Centralen, a short walk from the Waterfront Congress Centre
Approx. 8 km west of central Stockholm
to venue
Approx. 25-35 min by road; 30-40 min by airport bus to Brommaplan then metro Green Line to T-Centralen
by car
Hotel tiers
A range of accommodation options near the venue and across key areas.
Radisson Blu Waterfront Hotel, Stockholm
upscale
Stockholm Waterfront Congress Centre (adjacent, approx. 20 yd)Scandic Continental
midscale
Central Stockholm near the Waterfront Congress CentreMälardrottningen Hotell & Restaurant
3-star
Approx. 0.5 mi from Stockholm Waterfront Congress CentreComfort Hotel Xpress Stockholm Central
budget
Stockholm Central station areaLocal transport
Get around the city with these convenient transport options.
rail
Estimated costUSD 12-28 airport or regional rail single journey
Best forStockholm Arlanda (ARN) to Stockholm Central, then walk to Stockholm Waterfront Congress Centre
Arlanda Express is the fastest airport transfer at roughly 20 minutes, and Stockholm Central exits onto Vasagatan, a 5-8 minute walk from the venue. Worth it for same-day arrival before a meeting.
rail
Estimated costUSD 12-28 airport or regional rail single journey
Best forStockholm Arlanda (ARN) to Stockholm Central on the SL commuter train
The cheaper rail option takes roughly 35-40 minutes to Stockholm Central. The airport station fee is charged separately from the SL ticket, so budget for both.
bus
Estimated costUSD 35-75 taxi or rideshare to the venue district
Best forStockholm Arlanda (ARN) to Stockholm Cityterminalen by Flygbussarna coach
Coach services run to the Cityterminalen next to Stockholm Central in roughly 40-50 minutes, which puts the venue a short walk away. Useful when rail disruption hits.
taxi
Estimated costApprox. SEK 500-700 with major operators' fixed airport prices; confirm the price before departure
Best forStockholm Arlanda (ARN) to Stockholm Waterfront Congress Centre
Allow 40-50 minutes outside peak hours. Use the marked taxi rank and agree the fixed price, since unlicensed cars can quote far higher.
public transport
Estimated costApprox. SEK 43-45 per 75-minute single ticket; 7-day pass approx. SEK 350-380; confirm on sl.se
Best forSL metro, bus and tram within Stockholm, with T-Centralen as the hub for the venue
T-Centralen is the main metro interchange and a 5-minute walk from the Waterfront Congress Centre. Tickets are bought in the SL app or tapped with a contactless bank card; cash is not accepted on board.
public transport
Estimated costUSD 35-75 taxi or rideshare to the venue district
Best forStockholm Bromma (BMA) to Stockholm Waterfront Congress Centre
Bromma has no rail link, so the bus to Brommaplan followed by the Green Line to T-Centralen is the standard transfer, taking 30-40 minutes.
Weather
Late May in Stockholm is late spring: daytime highs usually sit around 13-18 C and nights around 6-10 C, with a mix of bright spells and passing showers. May averages roughly 10-12 rain days, but daylight runs to about 18 hours, so evenings stay bright well after the show floor closes. Treat these as typical bands rather than a forecast and check SMHI or a local forecast in the week before travel.
Plan for the climate
Check temperatures and pack accordingly
Venue connectivity
Sweden has dense 4G and 5G coverage, and EU/EEA visitors roam on their home plan under roam-like-at-home rules. Travellers from outside the EU can buy prepaid data from Telia, Tele2, Telenor or Hallon with a passport at airport and city shops. Venue Wi-Fi is normally available to delegates - confirm the network name and access code at badge collection. Power is 230 V at 50 Hz on Type C/F europlug sockets, so UK, US and Australian travellers need an adapter. Stockholm is largely cashless, and card or mobile wallet covers taxis, transit and most meals.
Ride-hailing
Taxis
Public transit
Car rentals
Cultural notes
Useful information to help you have a smooth and respectful visit.
Business language
English is widely spoken across Swedish construction and engineering firms, so exhibitor pitches, technical data sheets and meeting requests can be handled in English. Swedish is still used in some local contractor conversations, especially among site-level crews.
Punctuality and flat hierarchies
Meetings start on time and Swedish buying teams tend to be small, technical and direct. Expect detailed questions on segment life, cost per cut, water and power demand, and documented silica controls rather than broad marketing presentations.
Fika and meeting rhythm
Coffee breaks are a fixed part of the Swedish working day, so mid-morning and mid-afternoon slots fill quickly. Booking a table for a fika conversation often works better than trying to hold a long stand meeting during peak floor traffic.
Cashless payments
Swish, cards and mobile wallets dominate; cash is rarely used and some venues and taxis no longer accept it. Service charges are normally included in restaurant bills, and tipping is modest even in upscale venues.
Evening hosting
Alcohol above low-strength beer is sold through the state Systembolaget monopoly, and restaurant tables in Norrmalm and Gamla Stan need booking during a busy May week. Plan customer dinners in advance rather than deciding on the night.
Dress and demo floor
Smart casual is standard for stand meetings, but the cutting and demolition demo areas require safety shoes and often hearing and eye protection. Bring closed footwear if you intend to walk the equipment zones rather than only the meeting stands.
Practical guides
Visitor & Exhibitor Essentials
Everything needed to arrive prepared, navigate the event, and make the visit productive.
Flights
Destination: ARN
Sample round-trip economy fares captured for 19-23 May 2027: London Heathrow to Stockholm Arlanda from SEK 1,760, Tokyo Narita from SEK 12,710, Singapore from SEK 13,902 and Sydney from SEK 16,745, including taxes and fees for one adult. Baggage and seat selection are charged separately on most economy fares. Book European short-haul 8-12 weeks out and long-haul 3-5 months out, comparing nonstop SAS, Norwegian and British Airways departures with one-stop routings via Helsinki (Finnair), Amsterdam (KLM) or Frankfurt (Lufthansa). ARN is the arrival airport for all samples, with the venue about 20 minutes away by Arlanda Express.
Transport
Get to the venue and around the city with these options.
Airport → venue: Primary gateways: Stockholm Arlanda (ARN): Approx. 40-50 min by road outside peak; about 20 min by Arlanda Express to Stockholm Central plus a 5-8 min walk; Stockholm Bromma (BMA): Approx. 25-35 min by road; 30-40 min by airport bus to Brommaplan then metro Green Line to T-Centralen. Allow road or rail time to Stockholm Waterfront Congress Centre; on-site parking is usually available at major exhibition venues.
Hotel → venue: Precinct hotels near Stockholm Waterfront Congress Centre: Stockholm Waterfront Congress Centre (adjacent, approx. 20 yd): Radisson Blu Waterfront Hotel, Stockholm; Central Stockholm near the Waterfront Congress Centre: Scandic Continental; Approx. 0.5 mi from Stockholm Waterfront Congress Centre: Mälardrottningen Hotell & Restaurant.
Ride-hail: Uber and Bolt both operate in Stockholm, and app cars reach the Waterfront Congress Centre from most City and Norrmalm hotels in under 10 minutes. Short central trips typically land around SEK 100-200, while an Arlanda run on a major taxi fixed price (Taxi Stockholm, Sverigetaxi) is usually SEK 500-700. Confirm the price before getting in, and note that pick-up points around Central station are often on adjacent streets rather than at the venue door.
Public transit: Stockholm's SL network covers metro (Tunnelbana), buses, trams and commuter rail, with T-Centralen as the main interchange a 5-minute walk from the venue. A single 75-minute ticket costs approx. SEK 43-45 and a 7-day pass approx. SEK 350-380, bought in the SL app or by tapping a contactless bank card. T-Centralen serves the Green, Red and Blue metro lines plus Citybanan commuter trains. Arlanda sits outside the standard zone, so commuter rail from the airport adds a station passage fee of roughly SEK 135. Fares are approximate - confirm on sl.se.
Parking: Central Stockholm kerbside parking is scarce, time-limited and expensive, so plan on a commercial garage in the Klara or City area within 5-10 minutes of the venue. Expect roughly SEK 250-450 for a full day, higher during event weeks. Confirm the garage, height clearance and pre-booking options with the venue before driving, and note that Stockholm congestion charges apply on weekdays to both Swedish and foreign-registered vehicles entering the city centre.
Weather
Plan and pack for the event climate.
Month: May 2027 (late spring)
Temperature: Daytime approx. 13-18 C, nights approx. 6-10 C - typical late-May Stockholm bands, confirm the forecast before packing
Seasonality: Spring showers are common in Stockholm in May, with roughly 10-12 rain days and about 30-40 mm across the month. Daylight is long, with sunrise around 04:00 and sunset around 21:30, so the show week feels bright even on show days that run late.
Packing: Pack layers: a light waterproof shell, a warm mid-layer for 6-10 C mornings, and comfortable walking shoes for the Central station, Klara and Gamla Stan pavements. Add a compact umbrella, a Type C/F power adapter for 230 V sockets, and a card-first wallet since Stockholm is largely cashless.
Plan your trip
Planning
Best day to visit: Day 2 (mid-show)
Mid-show days at World Concrete Cutting Summit usually combine full exhibitor attendance with scheduled B2B meetings, before early pack-down on the final day.
T-1
14 days out: register via concretecuttingsummit.com and store the confirmation, since badge collection at Stockholm Waterfront Congress Centre usually needs the booking reference.
T-2
13 days out: book Arlanda flights and choose your transfer - Arlanda Express for speed, SL commuter rail or Flygbussarna for cost - noting the venue is a short walk from Stockholm Central.
T-3
12 days out: reserve a hotel room; the attached Radisson Blu Waterfront and the Central station cluster fill quickly in late May.
T-4
10 days out: check passport validity and Schengen entry requirements if you are travelling from outside the EU/EEA, and start any visa application.
T-5
9 days out: shortlist the equipment lines you need to compare - sawing and drilling, diamond tooling, demolition robots, surface preparation, dust and slurry control.
T-6
7 days out: write down your buying questions (segment life, cost per cut, water and power demand, silica controls, service coverage in the Nordics) so supplier answers are comparable.
T-7
5 days out: check the official schedule page for session and demonstration times and sketch a two-day route across the floor.
T-8
4 days out: arrange travel insurance and, for non-EU travellers, a prepaid data plan or roaming option for Sweden.
T-9
3 days out: pack layers, a waterproof outer shell and shoes suitable for the walk between Central station and the waterfront.
T-10
2 days out: confirm meeting requests with exhibitors and download offline maps of the Klara and Norrmalm area.
T-11
1 day out: re-check the organiser's access, security and ID requirements, and confirm your arrival time at the venue.
Day 1
arrive 30-45 minutes before opening for badge collection, cloakroom drop-off and an orientation lap before scheduled meetings.
Sample visitor itinerary
Route-optimised day
Day 1 · morning
Registration and hall orientation at Stockholm Waterfront Congress Centre
Day 2 · core sessions
Supplier meetings and product demos
Day 3 · wrap-up
Final negotiations and follow-up
Networking spots
2World Concrete Cutting Summit registration concourse
Stockholm Waterfront Congress Centre
Central meeting point before and between hall appointments during show days.
Organiser B2B lounge (if offered)
Stockholm Waterfront Congress Centre
Hosted matchmaking and buyer programmes when published by the organiser.
Budget
Costs & budget
Build your working budget
Adjust the inputs below to create a directional event budget.
Estimated budget
Live estimate
- Hotel × 2 nights$150.00
- Per diem × 2$150.00
- Visa$185.00
Estimated total$485.00
This is a directional estimate. Please verify live rates before booking.
Decision
Visit, exhibit, or skip?
Should you go?
Use this quick check to decide whether World Concrete Cutting Summit fits your visit, exhibit or skip plan.
QUESTION 1 OF 6
What is your primary role?
Decision matrix
Compare participation options side by side to choose the best fit for your objectives.
visit
Your category focus aligns with the official product themes.
Best for
Buyers, researchers, and delegates evaluating the programme and networking value.
Min. budget
$400.00
Timeline
4-8 weeks before opening day for registration and travel.
Risks
Limited session times published - confirm agenda before booking.
exhibit
You have a clear lead-generation or launch goal for this market.
Best for
Suppliers and brands seeking qualified meetings with the event audience.
Min. budget
$2,500.00
Timeline
3-6 months for stand booking, freight, and marketing prep.
Risks
Booth pricing not published in captured sources - confirm with organiser.
skip
Programme, audience, or commercial goals do not match your plan.
Best for
Teams whose category or region fit is weak this edition.
Timeline
N/A
Risks
No major risks listed.
Gallery
Photos
FAQs & glossary
Answers
Frequently asked
What is the Concrete Cutting Summit and who is it for?
It is a Stockholm trade gathering for the concrete cutting, drilling, demolition and surface preparation sector, run under the official domain concretecuttingsummit.com. Core visitors are cutting and drilling contractors, demolition specialists, surface preparation crews, diamond tooling buyers and the distributors and rental houses that supply them across the Nordic market.
When and where does the 2027 edition take place?
19-21 May 2027 at Stockholm Waterfront Congress Centre in central Stockholm, Sweden. The venue sits beside Stockholm Central station, so arrivals by Arlanda Express, commuter train or coach finish with a short walk rather than a taxi transfer.
Which product areas are covered?
The scope runs across wall saws, wire saws and core drilling rigs; diamond blades, bits and wire beads; remote-controlled demolition robots and breakers; grinding, scarifying and shot-blasting equipment for floors; and the dust extraction, HEPA filtration and slurry handling kit that supports silica compliance on cutting jobs.
How do I register and are tickets trade-only?
Registration, ticket types, pricing and any trade-only access rules are published by the organiser on concretecuttingsummit.com. Confirm your ticket category and badge collection process there before you book flights or hotel rooms, since access policies are set by the organiser and can change between editions.
How do I get from Stockholm Arlanda to the venue?
Arlanda Express reaches Stockholm Central in about 20 minutes for roughly SEK 320-350 one way, and the Waterfront Congress Centre is then a 5-8 minute walk. The cheaper route is the SL commuter train or the Flygbussarna coach to the Central station area for roughly SEK 130-190 in 40-50 minutes. Major taxi operators charge around SEK 500-700 from the airport. Fares are approximate - confirm live prices.
Where should I stay near Stockholm Waterfront Congress Centre?
The Radisson Blu Waterfront Hotel is attached to the venue, Scandic Continental is a few minutes' walk across Vasagatan, and the Central station cluster (including Comfort Hotel Xpress) is 5-10 minutes on foot. Mälardrottningen on Riddarholmen is roughly 0.5 miles away. Late May is a busy Stockholm period, so book early and check cancellation terms.
Will there be live cutting or demolition demonstrations?
Demo slots are set by the organiser and listed on the published programme at concretecuttingsummit.com/schedule. Check that page close to the show for demonstration times, floor locations and any PPE or hearing protection required on the demo floor.
Do I need a visa to attend in Sweden?
Sweden is in the Schengen Area. EU/EEA and Swiss citizens travel on a national ID card or passport with no visa; UK, US, Canadian, Australian and New Zealand passport holders normally enter visa-free for up to 90 days in any 180-day period. Other nationalities may need a Schengen type C visa, so apply well ahead through a Swedish embassy, consulate or visa centre.
What is the weather like in Stockholm in late May?
Expect late-spring conditions: daytime highs usually 13-18 C, nights 6-10 C, a mix of bright spells and passing showers, and very long daylight. The venue and the Central station walk are indoors or short outdoor stretches, so a waterproof shell and layers cover most of the trip.
What language is used at the summit?
Swedish construction and engineering firms work comfortably in English, and exhibitor staff at an international Stockholm event normally present in English. Confirm the working language of individual sessions on the official programme if you are travelling specifically for a conference track.
Glossary
- Diamond wire sawing
- A cutting method that pulls a steel wire carrying diamond-impregnated beads through reinforced concrete, used for thick walls, foundations and bridge sections where a circular blade cannot reach.
- Wall saw
- A track-mounted circular saw fixed to a wall or floor that cuts straight openings and deep sections in reinforced concrete with a diamond blade, usually hydraulically driven.
- Core drilling
- Rotary drilling with a hollow diamond bit that removes a cylindrical core, used for service penetrations, anchors, ducting and test cores in concrete.
- Ring saw
- A hydraulically driven saw with a closed-loop diamond ring or chain that cuts flush against a surface and reaches corners and deep sections a circular blade cannot.
- Remote-controlled demolition robot
- A tracked, hydraulically powered machine operated by radio remote control that carries breakers, crushers or buckets into areas where workers would be exposed to falls, dust or collapse risk.
- Hydrodemolition
- High-pressure water jetting that removes deteriorated or over-poured concrete while leaving sound concrete and reinforcement intact, often used for bridge decks and repairs.
- Respirable crystalline silica (RCS)
- Fine quartz dust released when concrete is cut, ground or drilled; controlled on site with water suppression, on-tool extraction, containment and respiratory protection.
- Slurry management
- Capture, separation and recycling of the water and fines produced by wet cutting and core drilling, typically through settling tanks, filter presses or centrifugal separators before discharge.
- Surface preparation
- Mechanical treatment of a concrete floor before coating, topping or overlay: grinding, scarifying, shot blasting and milling to reach a defined surface profile.
- GPR (ground-penetrating radar)
- A scanning method that maps rebar, post-tension strands and embedded services before a cut is planned, reducing the risk of hitting live conduit or tensioning steel.
- Overcut
- The extra travel a saw makes past the marked line so the corners of an opening can be cut square and the removed block can be lifted clear.
1
2
3
4
5
6
7
8
9
10
11
Also known as
Alternate names and search phrases for this event.
- World Concrete Cutting Summit
- World Concrete Cutting Summit 2027
- World Concrete Cutting Summit Stockholm
- World Concrete Cutting Summit Stockholm 2027
- Stockholm Sweden
- Concrete cutting and drilling equipment
Digital business cards for the show floor
Display a free company card at your booth, or share your professional card on the show floor.