Valve World Southeast Asia Expo & Conference 2027 runs 15-16 September 2027 at BITEC Hall 104 in Bangkok, Thailand.
The biennial valve and flow-control trade fair moves from Singapore to Bangkok for its third Southeast Asian edition, pairing a 100+ exhibitor floor with a two-day technical conference and workshops.
Buyers from oil and gas, petrochemicals, power generation, water and manufacturing meet suppliers of valves, actuators, sealing and automation across the full value chain; the show is co-located with Tube Thailand, adding pipe, tube and pipeline technologies for project teams.
TL;DR
1Dates: 15-16 September 2027, 10:00-18:00 on day one and 10:00-17:00 on day two.
2Venue: BITEC Hall 104, 88 Debaratna Road, Bangna, Bangkok, Thailand.
3Scale: the 2025 edition drew 100 exhibitors and visitors from more than 53 countries.
4Format: a 100+ exhibitor floor plus panels, six themed workshops and a Young Engineer programme.
5Access: BTS Bang Na station (E13) Exit 1 connects to BITEC via skywalk.
Why visit
Compare valves, actuators, sealing and automation from 100+ suppliers in one hall, then use the conference and six workshop formats to test specifications against live project requirements. The Bangkok location cuts travel time for Thai, Vietnamese, Malaysian and Indonesian end users.
Why exhibit
Thailand's refining, petrochemical, power and water projects give exhibitors direct access to EPC contractors, project owners and maintenance teams that specify and buy valves. Co-location with Tube Thailand adds pipe and pipeline buyers who source flow-control equipment in the same visit.
Attendees, exhibitors & solutions
Who this event is for
Visitor profile
Typical attendee groups you can expect to meet.
Valve, actuator and flow-control engineers specifying equipment for oil and gas, LNG or petrochemical projects.
Procurement and supply-chain managers comparing suppliers for brownfield maintenance or new build.
EPC contractors and project owners sourcing qualified valve and sealing vendors for Southeast Asian projects.
Plant maintenance, reliability and inspection teams focused on fugitive emissions, corrosion and service life.
Exhibitor profile
Main supplier and exhibitor segments present at the show.
Valve manufacturers covering gate, globe, ball, butterfly, check and control valves.
Actuator, positioner and instrumentation suppliers for automated flow control.
Sealing, gasket and bolted-joint companies serving high-pressure and cryogenic duties.
Testing, certification, repair and refurbishment service providers for valves and flow systems.
Exit 1 at Bang Na station leads by skywalk to the Welcome Hall.
Facilities
Parking
On-site parking is listed by BITEC and the event travel page; use the Welcome Hall approach.
Food options
BITEC Welcome Hall food outlets
On-site dining
Parking: BITEC provides on-site parking for visitors arriving by car; follow signs for the Welcome Hall and Hall 104. Allow extra time on show mornings.
Gate: Enter through BITEC's Welcome Hall. From BTS Bang Na (E13) use Exit 1 and the skywalk directly into the Welcome Hall.
Attend
Entry & tickets
Trade-only
Event days & opening times
DayOpening hours
15 September 2027:10:00 AM – 6:00 PM
16 September 2027:10:00 AM – 5:00 PM
Ticket info
Badge collection
Collect your badge at the BITEC Welcome Hall registration desk; carry the passport or photo ID used for registration.
Ticket notes
No public ticket price was printed; the show is trade-focused and visitors should pre-register through the official site when registration opens.
Valve Design, Testing and StandardsCorrosion, Materials and Lifecycle PerformanceSafety, Reliability and Fugitive EmissionsActuation, Automation and Digitalisation
Co-located events
Tube Thailand 2027
Separate ticket
Tube, pipe and pipeline trade fair held alongside Valve World Southeast Asia at BITEC.
Same venue, BITEC Bangkok; check the organiser for hall access.
How the last edition performed
Previous edition
Last edition
2025
Completed
Exhibitors: 100
Edition #: 2
Visitor countries: 53
This edition
2027
Forecast — not final
Visitors: 1,500
Exhibitors: 100
Next edition
Not announced yet
Growth over time
New this edition
1
Bangkok debut
The 2027 edition moves the show from Singapore to BITEC in Bangkok for the first time.
Expo floor at a previous Valve World Southeast Asia edition
Impact
A bigger and stronger platform
The move to Bangkok puts the show inside Thailand's largest concentration of refining, petrochemical, power and water projects. For exhibitors, that means fewer travel barriers for Thai end users and faster access to EPC and maintenance buyers active in Map Ta Phut, Rayong and the Eastern Economic Corridor.
Audience quality
High-value decision-makers
The audience is technical and specifying-led: valve engineers, reliability and maintenance leads, procurement teams, EPC contractors and project owners. The 2025 edition drew visitors from more than 53 countries, and the conference adds a delegate segment that engages with standards, fugitive emissions and lifecycle performance rather than general exhibition browsing.
Exhibitor outcomes
Real business growth
A 9 sqm shell stand puts a valve or actuator supplier in front of regional buyers for two days at a fraction of the cost of a European flagship. Best returns come from booking a technical workshop slot or demo and pre-booking meetings with Thai EPC and end-user teams before the show.
Intelligence
Market context
Key market insights, trends, news and related events to help you understand the bigger picture.
Southeast Asia
Why it matters
Thailand is a regional hub for refining, petrochemicals, power generation and water infrastructure, with major project clusters around Rayong and the Eastern Economic Corridor. A Bangkok valve show puts global manufacturers next to the EPC contractors, project owners and maintenance teams that specify and buy flow-control equipment across ASEAN.
Industry trends
Key trends shaping this market and its wider industry.
01
Fugitive emissions and tighter sealing rules
Operators are demanding low-emission packing, qualified stem seals and documented leak testing as emissions rules tighten across Southeast Asian process plants.
What it changes: Valve suppliers that can evidence low-emission performance and testing win specification slots on new and upgraded facilities.
02
Refurbishment over replacement
Brownfield operators are extending valve life through repair, recertification and upgraded trim rather than buying new equipment, driven by lead times and capital discipline.
What it changes: Service and refurbishment providers gain visibility with maintenance and reliability teams at a two-day regional show.
03
Digital monitoring and actuation
Plant teams are adopting smart positioners, partial-stroke testing and remote valve monitoring to cut unplanned downtime and support predictive maintenance.
What it changes: Automation and instrumentation exhibitors can position hardware and software as one reliability package for Thai and regional end users.
Valve World circuit and adjacent Asian shows
Book six to nine months ahead for stand space and travel.
The Bangkok edition sits inside the global Valve World portfolio, with sister shows in Shanghai, Düsseldorf and Calgary plus regional tube and wire events.
3–4 Jun 2026
Valve World Calgary Conference & Expo 2026
Calgary, Canada
First Calgary edition; dates from the organiser's upcoming-events list.
Many ASEAN and Western passport holders can enter Thailand visa-free for short visits; business visitors should confirm their nationality's current rule.
—
Varies by nationality
Thailand maintains visa-exemption arrangements for many countries; confirm the current list and permitted stay before booking.
Do not assume ATA Carnet cover for Thailand; confirm temporary import procedure with a Thai customs broker before shipping exhibits.
September is late rainy season in Bangkok: hot, humid and prone to short heavy downpours, with temperatures typically 25-33 C. Carry a compact umbrella and allow extra taxi time in rain.
Plan for the climate
Check temperatures and pack accordingly
Venue connectivity
Thai mobile SIMs and eSIMs are widely available at Suvarnabhumi and Don Mueang; BITEC and most hotels provide Wi-Fi. Download the BTS and ride-hailing apps before arrival.
Ride-hailing
Taxis
Public transit
Car rentals
Cultural notes
Useful information to help you have a smooth and respectful visit.
Dress for a trade show, not the beach
Bangkok business events are smart-casual; light fabrics help with heat and humidity, but shoulders and knees should be covered when visiting temples.
Respect the monarchy and Buddhist sites
Keep conversations respectful around the monarchy and remove shoes before entering temple buildings; dress modestly at Wat Pho and the Grand Palace.
Practical guides
Visitor & Exhibitor Essentials
Everything needed to arrive prepared, navigate the event, and make the visit productive.
Flights
Destination: Suvarnabhumi Airport (BKK)
Book 8-12 weeks ahead; September is shoulder season and fares are usually below December peak. Suvarnabhumi has the best international connections.
Visa
Many nationalities enter Thailand visa-free for short business visits, but rules depend on passport and purpose. Confirm before booking.
Estimated cost: Visa fees vary by nationality; visa-exempt entry is normally free.
Processing: e-Visa typically several working days; apply at least two weeks ahead.
Carry a passport valid for at least six months and proof of onward travel.
Get to the venue and around the city with these options.
Airport → venue: Suvarnabhumi (BKK) to BITEC is about 30 km and 35-50 minutes by taxi; the airport rail link plus BTS is cheaper but slower with luggage.
Hotel → venue: Use the BTS Sukhumvit line to Bang Na (E13), Exit 1, then the skywalk into BITEC's Welcome Hall.
Ride-hail: Grab and Bolt are widely used in Bangkok; set the drop-off to BITEC Welcome Hall and allow for traffic.
Public transit: BTS is the most reliable option; buses serve the Bangna area but routes and times vary.
Parking: BITEC has on-site parking; arrive early on show mornings.
Weather
Plan and pack for the event climate.
Month: September
Temperature: 25-33 C
Seasonality: Late rainy season with short, heavy afternoon downpours; humidity stays high.
Packing: Light business clothes, a compact umbrella, breathable shoes and a power bank.
Plan your trip
Planning
Best day to visit: Day 1, 15 September 2027
Day one opens with the longest hall hours (10:00-18:00) and typically carries the conference keynotes and the strongest exhibitor staffing. Use day two for follow-up meetings and workshop sessions.
T-14
Confirm registration and print or save the confirmation — Check the official site for visitor registration opening; carry the same ID used to register.
T-10
Book flights and a Bangna or BTS-connected hotel — September is rainy season; choose a hotel within walking distance of the Skytrain.
T-7
Build a shortlist of exhibitors and book meetings — Use the exhibitor list and target valve, actuator and sealing suppliers relevant to your plant.
T-3
Check visa or entry rules and travel insurance — Confirm passport validity of at least six months and keep a digital copy of documents.
T-1
Plan the BTS route and pack for heat and rain — Bang Na (E13) Exit 1 and the skywalk lead to BITEC's Welcome Hall; bring an umbrella and power bank.
Sample visitor itinerary
Route-optimised day
09:30
Arrive at BITEC Welcome Hall and collect badge
BITEC Welcome Hall
10:15
Walk the valve and actuator aisles with a shortlist
Hall 104
12:30
Lunch and informal supplier meetings
BITEC concourse
14:00
Attend a conference panel or technical workshop
Conference rooms, BITEC
16:30
Follow-up meetings and notes before hall close
Hall 104
Side trips
2
Wat Pho and the Grand Palace
Cultural Half-Day
About 45-60 minutes by taxi from Bangna
Bangkok's best-known temple complex and reclining Buddha, useful for a half-day before or after the show.
Bang Krachao green lung
Nature and Cycling
About 30-40 minutes from Bangna
A quiet island of mangroves and cycle paths across the river from central Bangkok.
Networking spots
2
BITEC Welcome Hall concourse
Venue
Main coffee and meeting point between halls; good for casual follow-ups.
Bangna rooftop bars and hotel lobbies
After-hours
Hotels around Bangna and lower Sukhumvit host informal supplier dinners during show week.
First-timer guide
Follow-up playbook
Send a short thank-you within 24 hours naming the product and project discussed.
Attach the technical data sheet or drawing requested at the booth.
Confirm the next step and owner, whether a quote, sample or plant visit.
Log the lead in the CRM with source, consent and a follow-up date.
Review pipeline after two weeks and escalate stalled technical questions.
Valve sales cycles in Thailand often run through EPC contractors and end-user engineering teams, so follow-up should reach both the commercial contact and the specifying engineer. Thai buyers value a clear technical package and a local service path.
Budget
Costs & budget
Shell scheme
THB 12000–20000 / m²
Raw space
THB 8000–14000 / m²
Standard booth
9 m²
No printed tariff was found; bands are editorial estimates for a Southeast Asian trade show and should be confirmed with the organiser.
Use a mobile lead-capture app or QR landing page with PDPA consent language.
FAQs & glossary
Answers
Frequently asked
When is Valve World Southeast Asia 2027?
Valve World Southeast Asia Expo & Conference 2027 takes place on 15 and 16 September 2027 at BITEC in Bangkok, Thailand. Day one runs from 10:00 to 18:00 and day two from 10:00 to 17:00. It is the third Southeast Asian edition and the first held in Bangkok.
Where is Valve World Southeast Asia 2027 held?
The event is held at the Bangkok International Trade & Exhibition Centre, known as BITEC, in Hall 104. The address is 88 Debaratna Road (km. 1), Bangna Tai, Bangna, Bangkok 10260, Thailand. The nearest BTS station is Bang Na (E13), Exit 1, linked to the venue by skywalk.
Is Valve World Southeast Asia 2027 free to attend?
No ticket price has been published for the 2027 edition. The event is trade-focused and aimed at industry professionals rather than the general public. Visitors should check the official website for registration opening and any visitor fee before booking travel to Bangkok.
How do I register for Valve World Southeast Asia 2027?
Visitor registration was not open on the pages reviewed, and no registration link was printed. Register through the official event website when the visitor portal launches, and carry the passport or photo ID used for registration. Trade visitors should pre-register rather than relying on on-site entry.
Who should exhibit at Valve World Southeast Asia 2027?
Valve manufacturers, actuator and positioner suppliers, sealing and bolted-joint companies, testing and certification firms, and repair or refurbishment providers should exhibit. The show targets suppliers serving oil and gas, petrochemical, chemical, power, water and LNG projects across Thailand and Southeast Asia. Co-location with Tube Thailand adds pipe and pipeline buyers.
How many exhibitors and visitors attend Valve World Southeast Asia?
The 2025 edition featured 100 exhibitors and visitors from more than 53 countries. The 2023 debut drew almost 140 companies and over 2,000 visitors from around 40 countries. Across two editions the organiser reports 3,100+ visitors and 300+ conference delegates.
What industries does Valve World Southeast Asia cover?
The show covers oil and gas, petrochemicals, chemical processing, power generation, water and wastewater, LNG, marine, infrastructure and industrial manufacturing across Southeast Asia. Exhibits span valve design, manufacturing, materials, automation, sealing, actuation, procurement, installation, operation, maintenance, reliability, safety and lifecycle performance.
Is Valve World Southeast Asia co-located with another show?
Yes. The 2027 edition is held alongside Tube Thailand at BITEC, bringing tube, pipe, pipeline and industrial processing technologies into the same venue. The co-location lets project teams compare valve and flow-control equipment with the tube and piping systems they connect to, in one visit to Bangkok.
How do I get to BITEC by public transport?
Take the BTS Skytrain to Bang Na station (E13) and use Exit 1. A skywalk leads directly from the station to BITEC's Welcome Hall, then follow signs to Hall 104. Ride-hailing and taxis are also common; allow extra time for Bangkok traffic on show mornings.
Glossary
1
Gate valve
A linear-motion valve that opens or closes by lifting a gate out of the flow path; used mainly for isolation rather than throttling.
2
Ball valve
A quarter-turn valve with a drilled spherical ball that gives fast shut-off and low flow resistance in process and pipeline service.
3
Actuator
A device that moves a valve stem automatically, using pneumatic, electric or hydraulic power, so the valve can be controlled remotely or by a safety system.
4
Fugitive emissions
Unintentional leaks of gases or vapours from valve stems, flanges and seals; a major focus of valve testing, packing design and emissions regulation.
5
EPC contractor
An engineering, procurement and construction company that designs and builds process plants and specifies the valves and flow-control packages installed there.
6
Cryogenic service
Valve duty at very low temperatures, such as LNG plants, where materials, sealing and testing must be qualified for thermal contraction and tight shut-off.
7
Refurbishment
Restoring a used valve to service by replacing seats, seals, stems or coatings, often cheaper and faster than buying new equipment for brownfield plants.
Also known as
Alternate names and search phrases for this event.