Subsea Tieback Forum & Exhibition 2027 runs February 16-18 at the Henry B. Gonzalez Convention Center in San Antonio, Texas.
The three-day event combines a technical conference curated by an industry advisory board with an exhibition of subsea equipment, controls and services. It is a closed-forum gathering for operators, engineers, contractors and technology suppliers working on deepwater tieback projects.
TL;DR
1Runs February 16-18, 2027, over three days in San Antonio, Texas.
2Venue: Henry B. Gonzalez Convention Center, 900 E Market St, San Antonio, TX 78205.
3The organiser expects 1,700+ subsea professionals and 150 exhibiting companies.
4The 2026 edition in New Orleans drew 1,520+ verified attendees and 100+ exhibitors.
5Sessions are closed to press and focus on subsea tieback engineering, operations and new technology.
Why visit
Visit Subsea Tieback 2027 to hear operator case studies on tieback design, flow assurance, integrity and decommissioning, and to compare equipment and service suppliers on one exhibition floor. The closed-forum format puts field supervisors, project engineers and senior managers in the same rooms, which makes technical questions and peer benchmarking faster than a general oil and gas show.
Why exhibit
Exhibit at Subsea Tieback 2027 to reach a concentrated Gulf of Mexico audience of subsea engineers, operations planners and project decision-makers. The 2026 post-show report recorded 1,520+ verified attendees and 100+ exhibitors, and the organiser describes an audience drawn from more than 30 countries. A focused floor and technical programme suit hardware, controls, flow-assurance and inspection suppliers.
Attendees, exhibitors & solutions
Who this event is for
Visitor profile
Typical attendee groups you can expect to meet.
Subsea and offshore project engineers evaluating tieback architecture and equipment.
Field supervisors and operations planners responsible for deepwater production.
Procurement and supply-chain managers sourcing subsea hardware and services.
Senior managers and technology leads tracking deepwater project economics.
Exhibitor profile
Main supplier and exhibitor segments present at the show.
Subsea equipment manufacturers: trees, manifolds, connectors and controls.
Flow-assurance, umbilical, riser and pipeline technology providers.
Inspection, repair, maintenance and decommissioning service companies.
Digitalisation, monitoring and subsea power specialists.
900 E Market St, San Antonio, TX 78205, United States
Entrances & gates
Market Street entrance
Exhibit Hall
Main convention center access from E Market St.
Facilities
Food options
Concession outlets in the convention center, River Walk restaurants
On-site dining
Parking: The venue has no official on-site parking; the Convention Center Parking Garage at 850 E Commerce St is the closest public option, with additional parking at the Grand Hyatt.
Gate: Use the Market Street entrances for the convention center; allow extra time on the opening afternoon because registration and the networking reception overlap.
Attend
Entry & tickets
Trade-only
Event days & opening times
DayOpening hours
Wednesday7:00 AM – 6:00 PM
Thursday7:00 AM – 1:00 PM (exhibit hall opens 9:00 AM)
The 2026 edition in New Orleans welcomed more than 1,500 verified attendees and 100+ exhibitors, with 94% of attendees saying they would consider attending in 2027.
New this edition
1
New Technology Presentation Theater
A theater at the entrance to the exhibit hall for short technology presentations and audience dialogue.
Subsea Tieback concentrates a small, senior deepwater audience rather than a mass trade-show crowd. For suppliers, the value comes from meeting operators and engineering decision-makers who are actively specifying tieback hardware, controls and life-extension work.
Audience quality
High-value decision-makers
The audience is dominated by field supervisors, operations planners, engineers and senior managers from operators, contractors and service companies. The organiser reports 94% of 2026 attendees would consider returning in 2027, and the closed-forum format keeps the technical sessions peer-to-peer.
Exhibitor outcomes
Real business growth
ROI depends on fit: a focused 9-18 sqm stand can generate qualified conversations with a concentrated Gulf of Mexico buyer group, but the 100+ exhibitor base is small, so lead volume is lower than at OTC. Best returns come from pre-booked meetings and technical demonstrations for subsea hardware, controls and integrity services.
Intelligence
Market context
Key market insights, trends, news and related events to help you understand the bigger picture.
Gulf of Mexico / North America
Why it matters
The Gulf of Mexico remains one of the world most active deepwater tieback markets, and San Antonio places the show close to Houston, Corpus Christi and Gulf Coast operators. As fields mature, operators are extending existing hubs, reviving idle wells and adding longer subsea step-outs, which makes tieback hardware, flow assurance and life-extension services the core buying conversation.
Industry trends
Key trends shaping this market and its wider industry.
01
Longer tiebacks and hub reuse
Operators are tying new wells into existing platforms to avoid new host facilities, pushing longer step-outs and more complex flow assurance.
What it changes: Suppliers of high-pressure hardware, boosting and flowline insulation see demand from brownfield tieback projects.
Book hotel and booth space 4-6 months ahead; the Gulf Coast spring calendar fills quickly.
Subsea Tieback sits in a cluster of Gulf Coast and international subsea events; exhibitors often pair it with OTC in Houston and with Aberdeen or Galveston events to cover the annual buying cycle.
23–25 Feb 2027
Subsea Expo 2027
Aberdeen, United Kingdom
European subsea counterpart; dates are indicative and should be confirmed with the organiser.
February is mild and dry by Texas standards, with average highs near 21C (70F) and lows near 8C (46F). Bring a light jacket for evenings and rain protection for occasional cold fronts.
Plan for the climate
Check temperatures and pack accordingly
Venue connectivity
Downtown hotels and the convention center have Wi-Fi; a U.S. eSIM or local SIM is useful for airport transfers and ride-hailing.
Ride-hailing
Taxis
Public transit
Car rentals
Cultural notes
Useful information to help you have a smooth and respectful visit.
Business casual
San Antonio is casual and bilingual; business casual is standard for the conference and River Walk dining.
Tipping
Tipping 15-20% is expected in restaurants and bars; taxis and rideshare tips are customary.
Practical guides
Visitor & Exhibitor Essentials
Everything needed to arrive prepared, navigate the event, and make the visit productive.
Flights
Destination: SAT - San Antonio International Airport
Book 6-8 weeks ahead for February; Houston, Dallas and Atlanta are common connecting gateways.
Get to the venue and around the city with these options.
Airport → venue: SAT to downtown is 9 miles; rideshare or taxi takes 15-20 minutes and costs about $25-35.
Hotel → venue: Most River Walk and downtown hotels are a 10-20 minute walk from the Henry B. Gonzalez Convention Center.
Ride-hail: Uber and Lyft operate at SAT and downtown; use the designated pickup zone at the airport.
Public transit: VIA bus routes connect downtown, but walking is usually faster for River Walk hotels.
Parking: Use the Convention Center Parking Garage at 850 E Commerce St; there is no official venue parking.
Weather
Plan and pack for the event climate.
Month: February
Temperature: 8-21C (46-70F)
Seasonality: Mild and mostly dry, with occasional cold fronts and light rain.
Packing: Layer for cool mornings and mild afternoons; bring a compact umbrella and comfortable walking shoes.
Plan your trip
Planning
Best day to visit: Wednesday, February 17, 2027
Wednesday carries the keynote plenary, the fullest exhibit-hall day and the evening networking reception, so a one-day visitor sees the programme and the floor at their busiest.
T-14
Book registration and confirm the conference pass type — Check whether the SUT workshop or golf add-on is still available.
T-10
Reserve a River Walk hotel and airport transfer — Use the official housing block or a refundable downtown rate.
T-7
Build a target exhibitor list and request meetings — Prioritise subsea hardware, controls and integrity suppliers.
T-3
Download the schedule and mark must-attend sessions — Keynote is Wednesday morning; technical sessions run through Thursday lunch.
T-1
Pack business casual layers, badge confirmation and photo ID — February mornings are cool; the venue is walkable from downtown.
Sample visitor itinerary
Route-optimised day
08:00
Registration and badge collection
Registration desk outside the exhibit hall
09:00
Opening keynote and plenary session
Main session room
10:30
Supplier meetings on the exhibition floor
Exhibit hall
14:00
Technical sessions on tieback integrity and decommissioning
Session room 221
Side trips
2
The Alamo
Historic Site
10 minutes from downtown hotels
The defining Texas history site and an easy walk from the River Walk.
San Antonio River Walk
Urban Waterfront
Adjacent to the convention center
Restaurants, bars and a walkable canal route for evening networking.
Networking spots
2
River Walk restaurant row
Dining and drinks
Good for small group dinners after the Wednesday sessions.
Pearl District
Food hall and brewery area
A short rideshare from downtown; quieter than the River Walk for deeper conversations.
First-timer guide
Follow-up playbook
Send a personalised note within 24 hours referencing the booth conversation and the specific project need.
Log the lead source, consent status and next step in the CRM before the end of the show week.
Send technical documentation or a sample request within 5 business days.
Propose a 20-minute call with the technical owner, not a generic sales demo.
Review pipeline after 30 days and recycle cold leads into a quarterly newsletter with an opt-out.
Subsea buying cycles are long and technical; follow-up should move from booth conversation to a scoped technical discussion, not a mass email.
Budget
Costs & budget
Shell scheme
USD 550–750 / m²
Raw space
USD 380–520 / m²
Standard booth
9 m²
Rates are editorial estimates for a U.S. Gulf Coast subsea trade show; request the 2027 exhibitor prospectus for the official tariff.
Badge-scanning and CRM export; confirm consent capture at the booth.
FAQs & glossary
Answers
Frequently asked
When is Subsea Tieback Forum & Exhibition 2027?
Subsea Tieback Forum & Exhibition 2027 runs Tuesday, February 16, through Thursday, February 18, 2027, at the Henry B. Gonzalez Convention Center in San Antonio, Texas. The opening networking reception is on Tuesday evening, followed by the keynote plenary on Wednesday morning and technical sessions through Thursday lunchtime.
Where is Subsea Tieback 2027 held?
The event is held at the Henry B. Gonzalez Convention Center, 900 E Market St, San Antonio, TX 78205, in the heart of downtown San Antonio near the River Walk. The venue is about 9 miles from San Antonio International Airport and walkable from many downtown hotels.
Is Subsea Tieback 2027 free?
No free public pass is listed. Registration for 2027 is open, and the organiser says registration and pricing will be released shortly. Delegate passes cover the full conference rather than the exhibit floor alone, so budget for a paid registration or an exhibitor pass allocated with booth space.
Who should attend Subsea Tieback 2027?
Subsea Tieback suits subsea and offshore engineers, field supervisors, operations planners, project managers, procurement teams and senior decision-makers working on deepwater tiebacks. The programme is built for people who design, build, operate or service subsea systems, and the closed-forum format is aimed at technical peers rather than the general public.
Who should exhibit at Subsea Tieback 2027?
Companies that supply subsea trees, manifolds, connectors, controls, umbilicals, flowlines, flow-assurance services, inspection and decommissioning technology should exhibit. The 2026 edition recorded 100+ exhibitors and 1,520+ verified attendees, so the floor reaches a concentrated Gulf of Mexico operator and engineering audience rather than a broad consumer crowd.
How many people attended Subsea Tieback 2026?
The official 2026 post-show report records 1,520+ verified attendees and 100+ exhibitors at the March 3-5, 2026 edition in New Orleans. The report also says 94% of attendees would consider attending in 2027 and 100% of exhibitors would consider exhibiting again, figures the organiser published for the last completed edition.
Is Subsea Tieback open to the press?
No. The organiser describes Subsea Tieback as a closed-forum event and states that press are not allowed to attend the technical sessions, so proceedings are not published. Registered delegates and exhibitors can attend the sessions, and the exhibition floor is open to badge holders during show hours.
What topics are covered at Subsea Tieback 2027?
The 2027 programme covers subsea tieback design, flow assurance, integrity and life extension, decommissioning, new technology and project execution. Scheduled sessions include live hot-tap installation, riser abandonment, Gulf of America tieback decommissioning, flexible riser fitness and artificial lift case studies, alongside a student design competition and networking receptions.
How do I register for Subsea Tieback 2027?
Register through the official 2027 registration portal linked from the event website. Exhibitors receive one complimentary full-conference registration and two booth-staff registrations per 100 square feet of purchased space. Bring a photo ID and confirmation to the registration desk; the organiser says 2027 pricing will be released shortly.
Is there a workshop before Subsea Tieback 2027?
Yes. A SUT-US pre-conference workshop is listed as a separate-registration event, and the 2026 workshop ran the day before the main forum with six professional development hours. The 2027 schedule also includes a golf tournament and a student design competition; check the registration page for current add-on availability and prices.
Glossary
1
Subsea tieback
A development where a satellite well or field is connected to an existing host platform by flowlines, risers and controls, avoiding the cost of a new surface facility.
2
Umbilical
A bundled cable that carries power, hydraulic fluid and chemical injection from the host to subsea equipment, often alongside fibre-optic communications.
3
Flowline
The pipeline that carries produced fluids from a subsea well or manifold back to the host facility.
4
PLET
Pipeline end termination, the structural assembly that connects a flowline to a subsea well, manifold or another pipeline.
5
HIPPS
High-integrity pressure protection system, a safety barrier that isolates high-pressure sections of a subsea production system.
6
SUT
The Society for Underwater Technology, a professional body that runs subsea training and pre-conference workshops alongside the forum.
7
FPSO
Floating production, storage and offloading vessel, a common host facility for deepwater tiebacks in regions without pipeline infrastructure.
Also known as
Alternate names and search phrases for this event.