October Special — 50% off Spotlights and exhibitor listsSee prices

    Dates

    27–30 Sep 2027

    City / country

    Bangkok, Thailand

    Venue

    Toronto Congress Centre

    Time

    10:00 AM – 5:00 PM

    20 Floor Picks

    Matched booths for CMTS CANADIAN MANUFACTURING TECHNOLOGY SHOW 2027

    Get my picks

    Exhibiting at?

    Enter your business email to get a free first Exclusive Spotlight worth 250$.

    Explore Spotlights
    Register / Buy Tickets

    Are you the organiser of this event?

    Event overview

    Overview

    CMTS is more than an exhibition; it is where the people shaping Canadian manufacturing come to connect, learn, and build the future together.

    Showcasing the best in machine tools, automation, robotics, additive manufacturing, digital transformation, and smart factory solutions, CMTS is where manufacturers discover what's next, compare technologies, and find the partners that help them move from concept to production

    TL;DR

    1. 1CMTS 2027 runs September 27–30, 2027 at the Toronto Congress Centre in Toronto, Ontario
    2. 2Organized by SME, it is Canada's largest and most influential manufacturing technology event, held
    3. 3The show features 150+ technology exhibits across advanced manufacturing, machining, and metalworking
    4. 4Key technology zones include the Innovation Park, RAPID + TCT Showcase, Smart Manufacturing Experience
    5. 5Attendees include high-level decision-makers from aerospace, automotive, medical, consumer products, energy, and advanced manufacturing

    Attendees, exhibitors & solutions

    Who this event is for

    Visitor profile

    Typical attendee groups you can expect to meet.

    Hospital Directors, Chief Medical Officers, and Department Heads
    Medical Device Distributors, Wholesalers, and Regional Importers
    Biomedical and Clinical Engineers and Technical Facility Managers
    Government Healthcare Procurement Officials and Ministry Representatives
    General Practitioners, Specialist Physicians, and Clinical Researchers

    Exhibitor profile

    Main supplier and exhibitor segments present at the show.

    Medical Imaging, Ultrasound, and Diagnostic Equipment Manufacturers
    Hospital Furniture, Surgical Tables, and Operating Room Infrastructure
    Emergency Care, Patient Monitoring, and Resuscitation Devices
    In-Vitro Diagnostics (IVD), Laboratory Reagents, and Point-of-Care Systems
    Digital Health, Telemedicine, and Hospital Information Systems (HIS)

    Product categories

    Key solution areas showcased across the event.

    Additive Manufacturing
    Automation
    Robotics
    Design Engineering
    Industry 4.0 / IIoT
    Machine Tools
    Tooling & Workholding
    Metalworking
    Measurement & Inspection
    Finishings & Coatings

    Location & Facilities

    Venue

    Open in Google Maps

    Toronto Congress Centre

    Bangkok, Thailand

    Entrances & gates

    South Building Main Lobby

    Guests enter through the South Building Main Lobby at 650 Dixon Road. Complimentary parking is available in the South Lot, directly in front of the main entrance. (2026 data)

    Facilities

    Parking

    Complimentary on-site parking is available for all attendees at the Toronto Congress Centre. The venue offers over 6,000 parking spaces including ample bus and truck parking. Parking is free of charge for event attendees

    6,000 spaces ·

    Accessibility

    The Toronto Congress Centre offers wheelchair accessibility throughout the venue. SME is committed to providing reasonable accommodation to disabled persons who require such accommodation to fully participate in SME-sponsored events. For assistance, visit the CMTS registration counters or call the SME Show Office at 416

    Cloakroom

    Coat and bag check is located in the lobby near the registration desks at the Toronto Congress Centre

    Charging points

    Electric vehicle charging stations are available at the Toronto Congress Centre. ChargeLab operates a Level 2 charging station (J1772, 32A, 7.68 kW) on Floor 1 of the North Building, available 24 hours. This is suitable for EV-driving attendees

    Food options

    TCC Cafes, Convenience Store / ATM

    On-site dining

    Parking: Complimentary on-site parking is available at the Toronto Congress Centre with over 6,000 spots. (2026 data)

    Attend

    Entry & tickets

    Trade-only

    Event days & opening times

    DayOpening hours
    (Day 1):10:00 AM – 5:00 PM
    (Day 2):10:00 AM – 5:00 PM
    (Day 3):10:00 AM – 7:00 PM
    (Day 4):10:00 AM – 3:00 PM [2025 data]

    • Trade Visitor Pass

      Free admission for healthcare practitioners, hospital administrators, medical device distributors, and pharmacists

    • Conference Delegate Pass

      Access to hospital management symposium and clinical engineering technical seminars

      THB 2,500.00

    Who runs the show

    Organisers

    Young Oh

    Sponsorship Contact (Companies A-D)

    EmailCallWebsite

    Siddharth Arya

    Sponsorship Contact (Companies E-L)

    EmailCallWebsite

    Zeno Kim

    Sponsorship Contact (Companies M-Z)

    EmailCallWebsite

    SME Show Office

    General Show Assistance

    EmailCallWebsite

    Ursula Tsoi

    SME Canada Exhibitor Services

    EmailCallWebsite

    Allison Martinez

    Exhibitor Support

    CallWebsite

    What's on

    Programme

    Speakers

    TG

    Tony Gareri

    Chief of WOW @ Roma Moulding

    Culture reform, leadership, and building high-performing teams [2025 edition]

    FV

    Flavio Volpe

    President @ Automotive Parts Manufacturers' Association (APMA)

    Competitiveness, innovation, and workforce development; Canadian automaker keynote [2025 edition]

    RC

    Robert Cattle

    Executive Director @ Canadian Tooling & Machining Association (CTMA)

    Competitiveness, innovation, and workforce development [2025 edition]

    CK

    Claudia Krywiak

    President and CEO @ Ontario Centre of Innovation (OCI)

    Critical Technologies, Critical Impact: How Ontario is Powering the Next Industrial Transformation [2025 edition]

    AC

    Andrew Carter

    Manufacturing Process and Engineering Manager @ Stratasys Direct

    From Disruption to Advantage: Scaling Additive for Real-World Impact [2025 edition]

    AL

    Ante Lausic

    Lead Process Engineer – Metal AM @ General Motors

    From Disruption to Advantage: Scaling Additive for Real-World Impact [2025 edition]

    KS

    Khaled Samk

    Additive Manufacturing Metallurgist @ Exco Engineering

    From Disruption to Advantage: Scaling Additive for Real-World Impact [2025 edition]

    GH

    Garrett Harmon

    Application Engineering Project Manager @ Caracol AM (3D Printing Canada)

    From Disruption to Advantage: Scaling Additive for Real-World Impact [2025 edition]

    MV

    Mihaela Vlasea

    Associate Professor, Multi-scale Additive Manufacturing Laboratory @ University of Waterloo

    From Disruption to Advantage: Scaling Additive for Real-World Impact [2025 edition]

    Topic tracks

    Additive ManufacturingSmart Manufacturing & Industry 4.0Machine Tools & ToolingAutomation & RoboticsExecutive Perspectives

    Co-located events

    Canada Makes Annual General Meeting (AGM)

    Separate ticket

    AI4Manufacturing Workshop

    Separate ticket

    SME GTA Chapter 26 Meet & Awards

    Separate ticket

    Co-located seminars

    Bright Minds Student Summit

    Paid

    The ROI of AI: Productivity & Process Optimization Workshop

    Paid

    Innovating Workforce Development: Tech-Driven Training for Canadian Manufacturing

    Paid

    Sponsors

    Elliott Matsuura

    EMEC

    FedEx

    Makino

    Mazak

    Megatel

    CaPlugs

    DropsA

    Insure Sheild/UPS

    Mitsubishi Electric

    SYSPRO

    Tyson Tool

    Canadian Manufacturing

    Design Engineering

    Manufacturing AUTOMATION

    MRO

    Plant

    Shop Metalworking Technology

    Government supporters

    NGen (Next Generation Manufacturing Canada)

    Advanced Manufacturing Supercluster, Government-funded initiative

    Ontario Centre of Innovation (OCI)

    Provincial innovation agency, Government of Ontario

    How the last edition performed

    Previous edition

    Current edition

    2027 · 6,120 visitors · 353 exhibitors

    CMTS returns to the Toronto Congress Centre, September 27–30, 2027. No exhibitor or visitor forecasts have been published by the organiser for the 2027 edition as of research date. [2025 edition] Organiser highlights state: 'CMTS returns to the Toronto Congress Centre, September 27–30, 2027, continuing to unite the technologies, people, and ideas shaping Canada's manufacturing future.' (2025 data)

    Forecast — not final

    Visitors

    9,000

    Exhibitors

    750

    Growth over time

    Edition recap

    CMTS 2025: Canada's Manufacturing Momentum in Motion

    From September 29 to October 2, 2025, the Toronto Congress Centre hosted CMTS 2025, bringing together more than 9,000 manufacturing professionals and over 750 OEMs, distributors, and brands. The event featured live demonstrations spanning machining, automation, robotics, additive manufacturing, digital transformation, and smart systems.

    At the heart of the show floor was Innovation Park, which housed three immersive zones: the RAPID + TCT Showcase for additive manufacturing, the Smart Manufacturing Experience for AI-driven production and digital twins, and the Discovery Zone for Canadian start-ups. The NGen Innovation Zone and CTMA Tooling & Manufacturing Pavilion spotlighted Canadian precision and skills development, while Project Arrow showcased homegrown EV innovation.

    The programme delivered 45+ sessions and 75+ speakers, including keynotes from Flavio Volpe (APMA) and Robert Cattle (CTMA), exploring competitiveness, innovation, and workforce development. The Bright Minds Student Summit connected students with employers and mentors. Evening networking events included the Exhibitor Appreciation Evening, SME Industry Celebration, Job Shop Night, and a Closing Social on the show floor.

    Organiser SME reported a 20 percent expansion of show floor space compared to the previous edition. CMTS returns to the Toronto Congress Centre, September 27–30, 2027.

    New this edition

    • 1

      RAPID + TCT Showcase

      North America's leading additive manufacturing platform made its CMTS debut in 2025, highlighting how AM is applied to tooling, part consolidation, and agile production. [2025 edition]

      Source
    • 2

      Smart Manufacturing Experience

      A dedicated zone demonstrating digital transformation through AI, automation, digital twins, and IIoT, connecting plant-floor performance to bottom-line impact. [2025 edition]

      Source
    • 3

      Discovery Zone

      A curated look at breakthrough technologies from across the globe, focused on next-generation innovation from Canadian start-ups and SMEs. [2025 edition]

      Source
    • 4

      Innovation Park

      A dynamic space at the heart of CMTS showcasing real solutions for modern production challenges, housing the RAPID + TCT Showcase, Smart Manufacturing Experience, and Discovery Zone. [2025 edition]

      Source
    • 5

      NGen Innovation Zone

      A vibrant hub where collaborative start-ups and technology clusters showcase how partnership fuels productivity and growth, presented by Next Generation Manufacturing Canada. [2025 edition]

      Source
    • 6

      CTMA Tooling & Manufacturing Pavilion

      Celebrated Canadian craftsmanship and precision engineering, showcasing tooling excellence and the country's investment in developing the next generation of skilled trades. [2025 edition]

      Source
    • 7

      Project Arrow Display

      Canada's first zero-emission concept vehicle, built by over 60 homegrown suppliers, was showcased on the show floor. [2025 edition]

      Source
    • 8

      Machine Tools & Tooling Pavilion

      Connects attendees with top names in machining, cutting, forming, and fabrication — the foundation of every smart factory. [2025 edition]

      Source

    Testimonials

    We're very pleased with the amount of traffic that we're getting. Our goal is to connect with some of the people we've worked with over the years, put a face to a name, and network

    Mike Ballerscheff · Business Development Manager · Elliott Matsuura Canada Inc · 2025

    For us, being here is about networking and building contacts. We want to build a brand awareness and get our name out there, that's our main goal here this week

    Ralph Davoli · Product Manager for Aerospace · MAPAL Inc · 2025

    We want to get our name out there. That's going to lead to sales, for sure, but we want to network, find new customers. So far, the traction we've had has been good. We've had a lot more quality leads rather than quantity of leads which we like

    Mike Nickell · Automation and Projects Manager · Ferro Technique · 2025

    It's a nice show, a lot of people have come by the booth and aren't aware of what we do. We're hoping to form more connections with entrepreneurs or established players that might need the services we have

    Cecilia Acevedo · Design & Business Developer · Honpe Prototyping · 2025

    There seems to be a lot more interest in Canadian-made manufactured products this year. For us, the main reason to be at CMTS is for brand recognition

    Sean Haggart · Brand Manager · KLETON Manufacturing · 2025

    CMTS 2025 is a fantastic opportunity for us to reconnect with our customers and build new partnerships with Canada's top manufacturers. We're excited to be back and look forward to another great show!

    Marc Hasrouny · President · Megatel CNC Solutions Inc. and Canadian Machine Tool Distributors Association (CMTDA) · 2025

    The growth of this event shows that Canadian manufacturing isn't just adapting to new economic realities – it's accelerating. From additive technologies and automation to workforce transformation, CMTS 2025 brings the nation's manufacturing innovation under one roof

    Steve Prahalis · Chief Operating Officer · SME · 2025

    Next edition outlook

    2027-09-27 – 2027-09-30
    estimated

    CMTS 2027 returns to the Toronto Congress Centre from September 27–30, 2027. The event is expected to build on the momentum of CMTS 2025, which drew over 9,000 attendees and 750+ exhibitors with a 20 percent expansion of show floor space. Planning is already underway for CMTS 2027, with organiser materials describing the event as 'Canada's next manufacturing milestone.' The Innovation Park format — including the RAPID + TCT Showcase, Smart Manufacturing Experience, and Discovery Zone — is expected to continue, alongside the Machine Tools & Tooling Pavilion, NGen Innovation Zone, and CTMA Manufacturing & Tooling Pavilion. Given the trajectory of AI adoption, workforce development initiatives, and tariff-driven supply chain realignment, the 2027 edition is likely to emphasize practical technology implementation and resilience strategies. However, no exhibitor or visitor forecasts have been published by the organiser for the 2027 edition as of research date

    Expanded Innovation Park with additive manufacturing, smart manufacturing, and discovery zones Continued focus on AI, IIoT, and digital transformation solutions Enhanced workforce development programming addressing skilled trades shortages Growth in exhibitor count and show floor space based on biennial expansion trend Increased emphasis on supply chain resilience and tariff mitigation strategies

    Impact

    A bigger and stronger platform

    CMTS 2025 was held from September 29 to October 2, 2025, at the Toronto Congress Centre in Etobicoke, Ontario. Over four days, more than 9,000 manufacturing professionals explored a show floor featuring over 750 OEMs, distributors, and brands. The event featured 45+ education sessions and 75+ speakers, with live demonstrations spanning machining, automation, robotics, additive manufacturing, digital transformation, and smart systems. Organiser SME reported a 20 percent expansion of show floor space compared to the previous edition. The show introduced Innovation Park, a new showcase area housing three technology zones: the RAPID + TCT Showcase for additive manufacturing, the Smart Manufacturing Experience for AI-driven production and digital twins, and the Discovery Zone for Canadian start-ups. The NGen Innovation Zone and CTMA Tooling & Manufacturing Pavilion spotlighted Canadian precision, partnerships, and skills development, while Project Arrow showcased homegrown EV innovation. Education programming included keynotes from Flavio Volpe (APMA) and Robert Cattle (CTMA), Executive Perspectives panels, and Tech Hub Sessions. The Bright Minds Student Summit connected students with employers and mentors. Evening networking events included the Exhibitor Appreciation Evening, SME Industry Celebration, Job Shop Night, and a Closing Social on the show floor. The event was held against the backdrop of significant tariff-related trade uncertainty, with almost no manufacturers unaffected by tariffs, and AI emerging as a central theme across keynote sessions and panel discussions. CMTS 2025 reaffirmed its position as Canada's national platform for manufacturing leadership, community, and opportunity

    Audience quality

    High-value decision-makers

    CMTS 2025 stood apart for stellar attendee quality. Organiser reports describe decision-makers, buyers, and engineers from Automotive, Industrial and Commercial Machinery, Job Shop/Contract Manufacturing, Aerospace, and other sectors attending ready to engage — asking sharper questions, exploring implementation strategies, and looking to act. The organiser noted that conversations were deeper, leads stronger, and intent unmistakable. Exhibitor testimonials reinforced this, with Ferro Technique reporting 'a lot more quality leads rather than quantity of leads.' MAPAL Inc. emphasized that their focus was on sitting down with customers to understand manufacturing needs and building their network. Several exhibitors noted strong traffic and the value of face-to-face connections. The event drew over 9,000 manufacturing professionals and 750+ exhibitors, with a national cross-section of decision-makers shaping the future of Canadian manufacturing

    Exhibitor outcomes

    Real business growth

    Exhibitor testimonials from CMTS 2025 provide evidence of return on investment, though specific ROI figures are not published by the organiser. Elliott Matsuura Canada Inc. expressed that they were 'very pleased with the amount of traffic' and that their goal was to connect with existing contacts and network. Ferro Technique reported quality leads and good traction. MAPAL Inc. emphasized networking and brand awareness as key goals. Honpe Prototyping, a Mexican 3D printing manufacturer, hoped to form connections with entrepreneurs and established players. KLETON Manufacturing noted increased interest in Canadian-made manufactured products and attended for brand recognition. Megatel CNC Solutions and CMTDA President Marc Hasrouny described CMTS as 'a fantastic opportunity to reconnect with our customers and build new partnerships with Canada's top manufacturers.' Organiser data indicates that capital investment in Canada's manufacturing sector was forecast to grow 15.5 percent in 2025 to $38.4 billion, providing a strong macro backdrop for exhibitor participation. The 2025 show featured 750+ exhibitors across 400,000 sq ft, with a 20 percent expansion of show floor space compared to 2023, reflecting growing exhibitor confidence in the event as a business development platform

    Intelligence

    Market context

    Key market insights, trends, news and related events to help you understand the bigger picture.

    Canada — Ontario, with national reach and growing cross-border relevance to the U.S. Great Lakes manufacturing corridor

    Why it matters

    CMTS 2027 arrives at a critical inflection point for Canadian manufacturing. The sector is expanding — the S&P Global Canada Manufacturing PMI hit a four-year high in July 2026 — yet simultaneously grappling with unprecedented trade uncertainty, with 42% of manufacturers having moved or planning to move production to the U.S. and 57% pausing or cancelling capital investments. Ontario alone has attracted over $46 billion in EV and battery manufacturing investments, creating massive demand for advanced manufacturing technologies and skilled workers. Canada's manufacturing workforce faces structural shortages, pushing companies to accelerate automation, robotics, and digital adoption. Against this backdrop, CMTS serves as Canada's largest and most influential manufacturing technology event, providing a single venue where buyers can evaluate machine tools, automation, additive manufacturing, and Industry 4.0 systems side by side. For exhibitors, CMTS offers direct access to decision-makers actively seeking productivity solutions to navigate tariff pressures and labour constraints. With over 9,000 professionals and 750+ exhibitors at the 2025 edition, and organizer SME reporting 20% show floor expansion, CMTS 2027 is positioned as the definitive platform for Canada's manufacturing transformation — where technology, talent, and policy converge to shape the next chapter of Canadian industry

    Industry trends

    Key trends shaping this market and its wider industry.

    01

    AI and Smart Manufacturing Move from Pilot to Production

    Canadian manufacturers are accelerating AI and IIoT adoption for predictive maintenance, quality inspection, and production optimization. The 2027 Advanced Manufacturing Outlook Survey tracks how companies are recalibrating technology investment in a tougher economy, with AI and emerging technologies playing an increasing role in day-to-day operations and data analysis. However, integration challenges with legacy systems and workforce constraints remain significant barriers to scaled deployment

    Source
    02

    Tariff Uncertainty Drives Supply Chain Realignment and Investment Hesitation

    Ongoing U.S. Canada trade tensions are reshaping the manufacturing landscape. A KPMG survey found 42% of Canadian manufacturers have moved or plan to move production to the U.S., while 57% have paused, reduced, or cancelled capital investment projects. Despite this, the S&P Global Canada Manufacturing PMI reached 53.5 in July 2026, the highest since June 2022, signaling continued expansion even amid trade headwinds

    Source
    03

    Workforce Shortages Accelerate Automation and Digital Adoption

    Canada's manufacturing sector faces persistent labour shortages, with Ontario's employment outlook for industrial engineering and manufacturing technologists rated as limited for the 2025–2027 period. Manufacturers are responding by accelerating automation, robotics, and digital tools to offset workforce constraints. The federal government launched the Advanced Manufacturing Workforce Alliance in August 2026 to bridge the skills gap

    Source
    04

    EV and Battery Manufacturing Investment Reshapes Ontario's Industrial Base

    Ontario has attracted over $46 billion in new investments in vehicle manufacturing and the EV battery supply chain, including PowerCo's $7-billion gigafactory in St. Thomas, on track for initial production in 2027. Bombardier is also investing $100 million in a new 126,000-square-foot manufacturing centre near Montreal, set to open before the end of 2027. These investments are driving demand for advanced manufacturing technologies showcased at events like CMTS

    Source
    05

    Additive Manufacturing Scales from Prototyping to Production

    Additive manufacturing is moving beyond prototyping into production-grade applications, supported by hybrid additive-subtractive systems and AI-enabled process control. CMTS showcases these advancements through the RAPID + TCT Showcase, which connects the additive manufacturing and 3D printing community with Canadian manufacturers seeking production-ready solutions

    Source
    06

    Sustainability and Cleantech Reshape Production

    Energy efficiency, EV infrastructure, and sustainable production are becoming strategic priorities for Canadian manufacturers. SME events now feature dedicated Cleantech ZONEs addressing the industry's growing focus on sustainability, reflecting broader market demand for green manufacturing solutions

    Market news

    Latest updates from across the market.

    Canada Manufacturing Activity Hits 4-Year High with PMI at 53.5

    The S&P Global Canada Manufacturing PMI rose to 53.5 in July 2026, the highest since June 2022, signaling a fourth straight month of expansion. Output and new orders increased amid improved domestic demand, though export orders fell for a second consecutive month due to tariffs. Input cost inflation accelerated to a four-year high

    Read

    Four in 10 Canadian Manufacturers Have Moved or Plan to Move Production to the U.S

    A 2026 KPMG Canada manufacturing poll found that 42% of firms have shifted or are planning to shift production to the U.S., with 29% having already done so. Additionally, 57% of firms have paused, reduced, or cancelled capital investment projects, and 42% are doing the same with R&D spending

    Read

    Ottawa Allocates $11.6M to Saskatoon Manufacturers for Tariff Relief

    The federal government announced $11.6 million for 10 projects at eight Saskatoon companies through the Regional Tariff Response Initiative, helping manufacturers offset the impact of U.S. tariffs. The funding supports equipment upgrades, automation, and capacity expansion across sectors including food processing, steel, and engineering

    Read

    Winnipeg Manufacturers Receive $15.9M to Offset U.S. Tariff Impact

    Nearly $16 million in federal funding is earmarked for 15 manufacturing projects across Winnipeg, supporting automation, supply chain strengthening, and capacity expansion. Recipients include Fort Garry Fire Trucks, Smartrend Manufacturing Group, and Innovair Industrial Limited

    Read

    Canada Launches Advanced Manufacturing Workforce Alliance to Tackle Labour Shortages

    The federal government launched the Advanced Manufacturing Workforce Alliance to address workforce shortages and prepare workers for the changing demands of Canada's advanced manufacturing sector. The alliance aims to identify workforce gaps and support training solutions

    Read

    Canada's Manufacturing Moment Arrives at N³ Summit in Toronto

    The N³ Summit, presented by NGen, convened up to 1,000 advanced manufacturers, investors, and policymakers in Toronto to chart Canada's industrial future. The summit featured 115 exhibitors showcasing industrial AI, robotics, additive manufacturing, and digital production tools

    Read

    North American Manufacturing Technology Event Circuit: September 2027 – June 2028

    September 2027 – June 2028

    CMTS 2027 sits within a dense circuit of manufacturing technology events across North America. The circuit spans regional SME events in Canada and the U.S., national flagship shows, and global platforms. For Canadian manufacturers, the circuit offers multiple touchpoints: CMTS in Toronto (September 2027), FABTECH Canada in Toronto (June 2028), and WMTS in Edmonton (April 2027) provide Canadian-specific access, while IMTS 2028 in Chicago and EMO Milano 2027 offer global scale. Companies targeting aerospace and defence should note AeroDef Manufacturing's 2027 showcases at RAPID + TCT and MT Series West. The circuit allows manufacturers to plan a strategic sequence: evaluate technologies at CMTS, follow up at regional events, and attend global flagship shows for deep dives. Given the biennial cycle of CMTS, the event serves as a national anchor point between larger global shows

    27–30 Sep 2027

    EMO Milano 2027

    Milan, Italy

    EMO returns to Milan in 2027, Hanover in 2029. The global flagship event draws exhibitors and visitors from over 150 countries. Appropriate for manufacturers seeking global technology benchmarks and international partnerships

    website
    27–30 Sep 2027

    Manufacturing Technology Series West (WESTEC) 2027

    Long Beach, CA, United States

    Over 350 exhibits expected. AeroDef Manufacturing 2027 will be deployed at MT Series West as a multi-faceted showcase. Strong fit for aerospace and defence manufacturers

    website
    27–30 Sep 2027

    HOUSTEX 2027

    Houston, TX, United States

    Part of the Manufacturing Technology Series. Dates subject to change — verify with organiser before booking

    website
    27–30 Sep 2027

    RAPID + TCT 2027

    Detroit, MI, United States

    Held at Huntington Place, Detroit. CMTS features a RAPID + TCT Showcase as part of its Innovation Park, making the two events complementary for additive manufacturing professionals. AeroDef Manufacturing 2027 will also be represented at RAPID + TCT

    website
    27–30 Sep 2027

    Advanced Design & Manufacturing Toronto (ADM) 2027

    Toronto, ON, Canada

    Organised by Informa Exhibition Group. Previous edition (October 2025) had 350 exhibitors and 6,000 visitors. Complementary to CMTS with a focus on plastics, packaging, and processing rather than machine tools and metalworking

    website
    27–30 Sep 2027

    Western Manufacturing Technology Show (WMTS) 2027

    Edmonton, AB, Canada

    SME-produced event, complementary to CMTS for manufacturers with Western Canadian operations. Focused on hands-on demonstrations and networking with top industry professionals

    website

    Spring 2027 — Additive Manufacturing Focus

    RAPID + TCT 2027WMTS 2027

    RAPID + TCT (April 13–15, Detroit) and WMTS (April 13–15, Edmonton) run concurrently. Companies with additive manufacturing interests should prioritise RAPID + TCT; those focused on Western Canadian manufacturing should attend WMTS

    Fall 2027 — Global and National Showcase

    CMTS 2027EMO Milano 2027

    CMTS (September 27–30, Toronto) and EMO Milano (October 4–8, Milan) run back-to-back. Canadian manufacturers can attend CMTS for domestic technology evaluation and follow up at EMO Milano for global benchmarking

    Late 2027 — Regional and Sector Events

    HOUSTEX 2027Manufacturing Technology Series West 2027Advanced Design & Manufacturing Toronto 2027

    HOUSTEX (November 2–4, Houston), MT Series West (November 16–18, Long Beach), and ADM Toronto (November 9–11, Toronto) cluster in November. ADM Toronto is the most accessible for Canadian attendees; HOUSTEX and MT Series West serve U.S. regional markets

    Mid-2028 — Canadian Fabrication Focus

    FABTECH Canada 2028

    FABTECH Canada (June 12–14, 2028, Toronto) follows CMTS 2027 by approximately nine months, offering a complementary focus on metal forming, fabricating, welding, and finishing at the same venue

    Event dates are sourced from official organiser websites where available. Dates marked with uncertainty should be verified directly with organisers before booking travel. CMTS 2027 dates confirmed at cmts.ca. EMO Milano 2027 dates confirmed by VDW and UCIMU. FABTECH dates from fabtechexpo.com. RAPID + TCT from rapid3devent.com. WMTS from wmts.ca. ADM Toronto from admtoronto.com. HOUSTEX and MT Series West from eventseye.com and production.mtseries.com

    Plan your trip

    Travel & logistics

    Local currency · CAD

    Arrival airports

    Choose from the following airports, with convenient access to the event and venue.

    YYZ

    Toronto Pearson International Airport

    Canada's largest and busiest airport, located immediately adjacent to the Toronto Congress Centre. The venue is roughly a 3-minute drive from the airport terminals. Options to reach the venue include taxi ($18–22 CAD), TTC bus route 52 ($4 CAD, ~28 min), or rideshare. The UP Express train connects the airport to downtown Union Station in 25–28 minutes for $12.35 CAD ($9.25 with PRESTO)

    3.7 km (2.3 mi)

    to venue

    6–13 minutes

    by car

    YTZ

    Billy Bishop Toronto City Airport

    Located on the Toronto Islands near downtown, this airport primarily serves regional and short-haul flights. The drive to the Toronto Congress Centre takes approximately 25–35 minutes depending on traffic. A taxi or rideshare is the most direct option

    16.1 km (10 mi)

    to venue

    25–35 minutes

    by car

    YKF

    Region of Waterloo International Airport

    A smaller regional airport serving southwestern Ontario. It offers limited domestic connections. Driving to the venue takes approximately 50–60 minutes via Highway 401 East

    70.1 km (43.6 mi)

    to venue

    50–60 minutes

    by car

    Hotel tiers

    A range of accommodation options near the venue and across key areas.

    Budget / 2-3 star
    Airport / Etobicoke (near Toronto Congress Centre)

    USD 89–146 / night

    Economy options within 1–3 km of the venue include Comfort Inn & Conference Centre Toronto Airport (240 Belfield Rd, 3-minute drive to venue), Holiday Inn Toronto Airport East by IHG (~$124–$186 USD/night, 500 m from venue, free airport shuttle), and Staybridge Suites Toronto Airport East by IHG (~$146–$427 USD/night, 600 m from venue). Prices are estimates based on September 2026 booking data and are subject to change. Rates rise significantly during major trade shows. Book early

    Mid-Range / 3-star
    Airport / Etobicoke (near Toronto Congress Centre)

    USD 130–200 / night

    Mid-tier options include Hyatt Place Toronto Airport (3-star, 450 m from venue), Radisson Toronto Airport West (3-star), Hilton Garden Inn Toronto Airport (official CMTS hotel partner), and Crowne Plaza Toronto Airport by IHG (official CMTS hotel partner, 2 km from Pearson Airport, free airport shuttle, $209–$229 CAD group rate for industry events). Prices are estimates and vary by booking date. The official CMTS 2025 housing provider was onPeak

    Upscale / 4-star
    Airport / Etobicoke (near Toronto Congress Centre)

    USD 150–250 / night

    Premium options include Delta Hotels by Marriott Toronto Airport & Conference Centre (4-star, 655 Dixon Rd, directly opposite the Toronto Congress Centre at 360 m, free airport shuttle, on-site Starbucks and Ginko Japanese Restaurant; September rates ranged $129–$220 USD/night in 2026), DoubleTree by Hilton Toronto Airport (official CMTS hotel partner, free airport shuttle, from ~$198 USD/night), The Westin Toronto Airport (official CMTS hotel partner), and Hilton Toronto Airport Hotel & Suites (official CMTS hotel partner, 5875 Airport Rd, 4-star, pool, airport shuttle). Prices are estimates based on 2026 booking data and subject to change

    Upscale / 4-star
    Downtown Toronto (20–30 min drive to venue)

    USD 160–280 / night

    Downtown options offer access to Toronto's dining, entertainment, and nightlife but require a 20–30 minute drive or UP Express connection to the venue. Options include Holiday Inn Toronto Downtown Centre (4-star, ~$182 SGD/night), DoubleTree by Hilton Toronto Downtown (4-star), Chelsea Hotel Toronto (4-star), and Sheraton Centre Toronto Hotel (connected to PATH). Prices are estimates and subject to change. Downtown hotels are best for attendees combining the show with leisure time in Toronto

    Local transport

    Get around the city with these convenient transport options.

    TTC Bus (Route 52A/52B/52D)

    Estimated cost$4.00 CAD (adult cash fare); $3.35 CAD with PRESTO card
    Best forPearson Airport Terminal 1 or Terminal 3 → Dixon Rd at Kelfield St (8-minute walk to venue); also connects from Lawrence West Station and Kipling Station

    Buses run every 15–20 minutes. Journey time from Pearson Airport terminals is approximately 6–12 minutes. The bus stop at Dixon Rd at Kelfield St is an 8-minute walk from the Toronto Congress Centre. Route 52A serves Pearson Airport Terminal 1, while 52B and 52D serve other destinations. This is the most budget-friendly airport-to-venue option. Buses operate from early morning until late evening

    UP Express Train

    Estimated cost$12.35 CAD one-way (adult); $9.25 CAD with PRESTO
    Best forToronto Pearson Airport → Union Station (downtown Toronto); connect to TTC or taxi for final leg to venue

    Trains depart every 15 minutes between 04:55 and 01:00. Journey time is 25–28 minutes. The UP Express does not stop at the Toronto Congress Centre directly; passengers must transfer to TTC or taxi at Union Station or at the airport. Best for attendees staying downtown who want a fast, reliable connection to Pearson Airport. The UP Express Pearson Airport station is approximately a 33-minute walk from the venue

    Taxi

    Estimated cost$18–$22 CAD (airport taxi flat rate from Terminal 1); $70–$90 CAD from downtown Toronto
    Best forPearson Airport Terminal 1 or Terminal 3 → Toronto Congress Centre (650 Dixon Rd)

    Taxis are available directly outside Arrivals at both terminals. The ride from Pearson Airport to the venue takes approximately 5–6 minutes (3.7 km). This is the fastest and most convenient option for arriving attendees, especially those with luggage. From downtown Toronto, the taxi ride takes 20–30 minutes depending on traffic and costs approximately $55–$80 CAD

    Rideshare (Uber / Lyft)

    Estimated cost$12–$18 CAD from Pearson Airport; $35–$50 CAD from downtown Toronto (estimate)
    Best forPearson Airport → Toronto Congress Centre; also available from downtown Toronto and surrounding areas

    Uber and Lyft operate throughout Toronto. Pickup at Pearson Airport is available from designated rideshare zones. From the airport to the venue, the ride takes approximately 6 minutes. From downtown Toronto, allow 20–30 minutes depending on traffic. Rideshare is a convenient option for attendees staying at hotels without shuttle service

    Parking (Self-Drive)

    Estimated costFree
    Best forOn-site parking at Toronto Congress Centre, 650 Dixon Rd, Etobicoke, ON M9W 1J1

    Complimentary on-site parking is available with over 6,000 spaces. The venue is easily accessible from Highway 401 and Highway 427. Take Highway 401 to Highway 427 South, exit at Dixon Road East. Parking is free for all attendees, making self-drive a practical option for local visitors or those renting a car. EV charging stations (Level 2, J1772) are available at the North Building

    Plan your trip

    Visa & entry documents

    Check the latest visa requirements and entry guidelines before travelling.

    Visa required
    ATA Carnet: accepted
    TypeWho needs itFeeProcessing
    Temporary Resident Visa (TRV) — Visitor VisaCitizens of countries that are not visa-exempt and do not hold a valid U.S. nonimmigrant visa. This includes citizens of India, China, Pakistan, Nigeria, the Philippines (unless eligible for eTA), and most countries in Africa, Asia, and the Middle East$100.00Varies by country and application volume; typically several weeks to a few months
    Electronic Travel Authorization (eTA)Citizens of visa-exempt countries flying to or transiting through Canada. This includes citizens of the United Kingdom, France, Germany, Australia, Japan, South Korea, and most EU countries. U.S. citizens do not need an eTA or a visa$7.00Usually within minutes, though some applications may take several days if additional documentation is requested

    Citizens of the following countries and territories do not need a visa or eTA to enter Canada: United States. Citizens of the following countries are visa-exempt but require an eTA when flying to Canada: Andorra, Australia, Austria, Bahamas, Barbados, Belgium, Brunei Darussalam, Bulgaria, Chile, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Japan, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Netherlands, New Zealand, Norway, Papua New Guinea, Poland, Portugal, Republic of Korea, Romania, San Marino, Singapore, Slovakia, Slovenia, Solomon Islands, Spain, Sweden, Switzerland, Taiwan, United Kingdom, Vatican City. As of 2026, Canada also extended visa-free air travel (eTA eligibility) to eligible citizens of Antigua and Barbuda, Argentina, Costa Rica, Morocco, Panama, Philippines, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Seychelles, Thailand, Trinidad and Tobago, and Uruguay, provided they have held a Canadian TRV in the past 10 years or currently hold a valid U.S. nonimmigrant visa. This list is subject to change; always verify with IRCC

    Canada accepts the ATA Carnet for the temporary duty-free admission of commercial samples, professional equipment, and goods for use at exhibitions and trade shows. In Canada, ATA Carnets are administered by the Canadian Chamber of Commerce (CCC). Carnets are generally valid for up to one year from the date of issue, but the Canada Border Services Agency (CBSA) may set the final date by which goods must be re-exported. The carnet covers goods that will be returned to the country of origin, including trade show displays and product samples. It does not cover goods that will be consumed, sold, repaired, or altered in Canada. The original physical ATA Carnet booklet must be presented to CBSA at the border; electronic manifest submission does not replace the physical document. Failure to properly close the temporary admission can result in duties or taxes being claimed under the carnet guarantee

    Official visa page

    Weather

    Late September in Toronto brings mild, transitional autumn weather. Average high temperatures range from 21°C to 22°C (70°F to 72°F), while average low temperatures drop to 12°C to 15°C (54°F to 59°F). The city experiences approximately 10 rainy days in September with total precipitation of about 69.9 mm (2.75 in). Humidity averages around 72%. Evenings can be cool, so a light jacket or sweater is recommended for after-show events. Daytime conditions are generally pleasant for walking between venues and nearby hotels

    Plan for the climate

    Check temperatures and pack accordingly

    Venue connectivity

    The Toronto Congress Centre benefits from excellent transport connectivity. Toronto Pearson International Airport is just 3.7 km away, with taxi rides taking 6 minutes and TTC bus route 52 connecting the airport to Dixon Road in approximately 28 minutes for $4 CAD. The UP Express train links the airport to downtown Union Station in 25–28 minutes ($12.35 CAD adult one-way, $9.25 with PRESTO), running every 15 minutes seven days a week. For local transit, TTC buses serve the Dixon Road corridor, with routes 52 and 45 providing access from Kipling Station and Pearson Airport. The venue is approximately 15 minutes from downtown Toronto by car (off-peak), and major highways including Highway 401 and Highway 427 are easily accessible. Complimentary on-site parking is available for attendees who drive

    Ride-hailing

    Taxis

    Public transit

    Car rentals

    Cultural notes

    Useful information to help you have a smooth and respectful visit.

    Business Etiquette in Toronto

    Toronto's business culture is generally informal yet professional. A firm handshake and direct eye contact are standard greetings. Punctuality is valued and expected for meetings and appointments. English is the primary business language. Canadian business conversations often begin with light pleasantries before moving to substantive topics. Business casual or business attire is appropriate for trade shows and conferences. It is common to exchange business cards, though digital exchanges are increasingly popular

    Tipping and Dining Customs

    Tipping is customary in Canada and considered part of the service industry's wage structure. For restaurant dining, 15–20% of the pre-tax bill is standard. At bars, $1–2 CAD per drink is typical. For taxis and rideshare services, 10–15% is customary. Hotel housekeeping staff generally receive $2–5 CAD per night. All cafes at the Toronto Congress Centre are cashless and accept debit and credit cards only. Many venues throughout Toronto have moved to cashless payment systems

    Currency and Payments

    The Canadian Dollar (CAD) is the local currency. Major credit cards (Visa, Mastercard, American Express) are widely accepted. U.S. dollars are generally not accepted at par; exchange rates apply. Currency exchange services are available at Toronto Pearson International Airport, operated primarily by International Currency Exchange (ICE) and CIBC, with kiosks in both terminals. ATMs are widely available throughout Toronto and at the venue. Contactless payments (tap) are widely supported

    Weather-Appropriate Attire

    Late September in Toronto marks the transition from summer to autumn. While daytime temperatures are comfortable, mornings and evenings can be significantly cooler. Layering is recommended — a light jacket or sweater over business attire works well. A compact umbrella or rain jacket is advisable given the moderate chance of rain. Comfortable walking shoes are essential for navigating the show floor and the large venue

    Local Transport and Navigation

    Toronto's public transit system is operated by the TTC (Toronto Transit Commission). A PRESTO card or contactless credit/debit card can be used for fare payment. The UP Express provides a direct rail link between Pearson Airport and downtown Union Station. Taxis and rideshare services (Uber, Lyft) are readily available. The Toronto Congress Centre is located in Etobicoke, west of downtown, near the airport. Driving is straightforward via Highway 401 and Highway 427, and parking at the venue is complimentary

    Practical guides

    Visitor & Exhibitor Essentials

    Everything needed to arrive prepared, navigate the event, and make the visit productive.

    Flights

    Destination: Toronto Pearson International Airport (YYZ)

    Book flights early for the best fares, especially for late September travel. Toronto Pearson is a major international hub with direct flights from most major global cities. U.S. carriers and Air Canada offer frequent service. Consider flying into Billy Bishop (YTZ) if arriving from a regional Canadian city. Allow extra time for customs and immigration if arriving internationally. The UP Express train from Pearson to downtown Union Station costs $12.35 CAD ($9.25 with PRESTO) and runs every 15 minutes

    Visa

    Most international visitors to Canada require either a Temporary Resident Visa (TRV) or an Electronic Travel Authorization (eTA) to enter Canada, depending on their nationality. Business visitors attending CMTS 2027 may qualify to enter as a business visitor without a work permit if their primary place of employment and source of income remain outside Canada and their stay is temporary. U.S. citizens need only valid identification. A letter of invitation from the Canadian host company (SME or an exhibiting company) and a letter of support from the visitor's parent company are strongly recommended and often expected by border services officers

    Estimated cost: Not yet confirmed

    Processing: TRV: several weeks to a few months; eTA: usually minutes, up to several days

    Estimated total cost reflects TRV fee ($100 CAD) plus biometrics fee ($85 CAD) for applicants requiring a visa and biometrics. eTA applicants pay only $7 CAD. Biometrics are collected at Visa Application Centres (VACs) worldwide. Business visitors should carry: the passport used for the eTA/TRV application, a valid passport for the entire stay, a letter of support from their parent company, a letter of invitation from the Canadian host, 24-hour contact details for the business host, and proof of sufficient funds for their stay and return. Business visitors can generally remain in Canada for up to six months. As of March 2026, IRCC updated officer guidance to require stronger documentation proving foreign employment, foreign payroll, and temporary intent

    Official

    Hotels

    Find a stay near the venue with options for every budget.

    Check-in (recommended)

    2027-09-27

    Check-out (recommended)

    2027-09-30

    Areas to stay

    Airport / Etobicoke — closest to venue (walking to 3 km), best for maximizing show floor time · Downtown Toronto — 20–30 min drive or UP Express to venue, best for nightlife and dining · Mississauga / Airport Corporate Centre — 10–15 min drive, quieter with suite-style options

    Budget (2-3 star)

    $89–$146 USD/night (estimate)

    Mid-Range (3 star)

    $130–$200 USD/night (estimate)

    Upscale (4 star)

    $150–$250 USD/night (estimate)

    Transport

    Get to the venue and around the city with these options.

    Airport → venue: Toronto Pearson International Airport (YYZ) is 3.7 km from the Toronto Congress Centre. Options: taxi ($18–$22 CAD, 6 minutes), TTC bus route 52 ($4 CAD, ~28 minutes), or rideshare. The UP Express train connects Pearson to downtown Union Station in 25–28 minutes ($12.35 CAD one-way, $9.25 with PRESTO). Most airport-area hotels offer complimentary shuttle service

    Hotel → venue: Most airport-area hotels are within 1–3 km of the venue. Delta Hotels by Marriott is directly opposite the Congress Centre (360 m, walkable). Free on-site parking is available for attendees who drive. TTC bus routes 52, 58, and 192 serve the venue from Kipling and Lawrence West stations

    Ride-hail: Uber and Lyft are widely available in Toronto. Estimated fare from Pearson Airport to the venue: $12–$18 CAD. From downtown Toronto to the venue: $35–$50 CAD depending on traffic

    Public transit: TTC bus routes 52, 58, and 192 connect Kipling and Lawrence West subway stations to the Toronto Congress Centre area. Standard TTC fare is $3.35 CAD (PRESTO) or $3.50 CAD (cash). The UP Express train runs every 15 minutes between Pearson Airport and Union Station ($12.35 CAD adult one-way, $9.25 with PRESTO)

    Parking: Complimentary on-site parking at the Toronto Congress Centre with over 6,000 spaces available. EV charging stations (Level 2, J1772) are available at the North Building

    Weather

    Plan and pack for the event climate.

    Month: September

    Temperature: 12°C–22°C (54°F–72°F)

    Seasonality: Moderate rainfall, approximately 10 rainy days and 69.9 mm total precipitation for the month. Humidity averages 72%

    Packing: Pack layers — a light jacket or sweater for mornings and evenings, plus business casual or business attire for the show. Comfortable walking shoes are essential for the large show floor. Bring a compact umbrella or rain jacket. Daytime temperatures are pleasant for walking between venues

    Itinerary builder

    Add priorities and side trips to make the most of your visit.

    Add side trips

    Default day plan

    1. 7:00 AMDepart hotel (airport area)
    2. 7:30 AMArrive at Toronto Congress Centre, park in free on-site lot
    3. 8:00 AMBadge pickup and morning coffee
    4. 9:00 AMExplore Machine Tools & Tooling Pavilion and Innovation Park
    5. 12:00 PMLunch and networking
    6. 1:00 PMAttend keynote or panel session on Industry 4.0 / Smart Manufacturing
    7. 3:00 PMVisit RAPID + TCT Showcase and Discovery Zone
    8. 5:00 PMDepart venue; optional dinner at Woodbine Racetrack or Bloor West Village

    Plan your trip

    Planning

    Best day to visit: 2027

    Day 2 (Tuesday, September 28) typically offers the best balance of show floor activity and education programming. Based on CMTS 2025 patterns: Day 1 features the Exhibitor Appreciation Evening and keynotes; Day 2 includes the SME Industry Celebration and a full day of sessions. Mid-week days draw the strongest attendance from decision-makers and engineers. (recommendation based on prior edition patterns)

    T

    Register for the show and book travel/accommodation — Register online at cmts.ca to receive your badge. Book flights and hotel early — airport-area hotels fill quickly during major trade shows. (guidance)

    T

    Plan your show floor route and prioritize exhibitors — Review the exhibitor list and floor plan online. Identify must-see booths in the Machine Tools & Tooling Pavilion, Innovation Park, and technology zones. Download the SME+ App for the interactive floor plan. (guidance)

    T

    Pre-book education sessions and meetings — CMTS 2025 featured 45+ sessions and 75+ speakers. Pre-register for sessions that align with your priorities. Reach out to exhibitors to schedule meetings in advance. (guidance)

    T

    Confirm travel logistics and download the SME+ App — Confirm hotel reservations, airport transfers, and parking. Download the SME+ App for the show directory, floor plan, and networking tools. Review the show's code of conduct and safety guidelines. (guidance)

    T

    Prepare your networking pitch and business cards — Have a concise elevator pitch ready. Bring business cards. Review the list of evening networking events and RSVP where required. (guidance)

    T

    Pack appropriately and review the weather forecast — Late September in Toronto averages 12°C–22°C. Pack layers and comfortable shoes for the large show floor. Bring a light rain jacket. (guidance)

    Sample visitor itinerary

    Route-optimised day
    7:00 AM

    Depart hotel (airport area)

    Hotel lobby
    7:30 AM

    Arrive at Toronto Congress Centre, park in free on-site lot

    650 Dixon Rd, Etobicoke
    8:00 AM

    Badge pickup and morning coffee

    South Building Main Lobby
    9:00 AM

    Explore Machine Tools & Tooling Pavilion and Innovation Park

    Exhibit Halls
    12:00 PM

    Lunch and networking

    On-site dining areas
    1:00 PM

    Attend keynote or panel session on Industry 4.0 / Smart Manufacturing

    Session Rooms
    3:00 PM

    Visit RAPID + TCT Showcase and Discovery Zone

    Innovation Park
    5:00 PM

    Attend evening networking social or depart venue

    South Building Main Lobby

    Side trips

    6

    Woodbine Racetrack

    Entertainment / Casino

    A major horse racing and entertainment complex with a casino, restaurants, and live events. Popular for evening entertainment and client hosting. (recommendation)

    3.3 km / 5 minutes by car

    BAPS Shri Swaminarayan Mandir

    Cultural / Religious Site

    A stunning traditional Hindu mandir and cultural complex, one of Toronto's architectural landmarks. (recommendation)

    6.4 km / 10 minutes by car

    Woodbine Mall & Fantasy Fair

    Shopping / Family Entertainment

    A shopping mall with an indoor amusement park, ideal for family members accompanying attendees. (recommendation)

    3.5 km / 7 minutes by car

    Humber Bay Park

    Park / Waterfront

    A 43-hectare park on Lake Ontario with trails and skyline views of Toronto. Good for a morning walk or evening stroll. (recommendation)

    12 km / 15 minutes by car

    Humber Arboretum

    Nature / Gardens

    250 acres of gardens, trails, and natural areas in northern Etobicoke. A peaceful escape from the show floor. (recommendation)

    10 km / 15 minutes by car

    Toronto Brewery Tours

    Food & Drink

    Guided tours of Toronto's craft brewery scene. A popular networking activity for visiting professionals. (recommendation)

    9.7 km / 15 minutes by car

    Networking spots

    4

    St. Louis Bar and Grill

    Casual Dining / Sports Bar

    Located 12 minutes from the venue at 557 Dixon Rd. A convenient spot for informal meetings after the show. (recommendation)

     

    Woodbine Racetrack

    Entertainment Complex

    5 minutes from the venue. Offers dining, casino, and live racing — a popular choice for evening entertainment and client hosting. (recommendation)

     

    Famous People Players Dinner Theatre

    Dinner Theatre

    Located at 343 Evans Ave, about 10 km from the venue. A unique black-light puppet theatre experience for evening group outings. (recommendation)

     

    SME ZONE (Booth 1016)

    On-Site Networking Hub

    The central hub of CMTS 2025 where the future of Canadian manufacturing takes shape. Explore major event attractions and connect with SME. [2025 edition]

     

    Budget

    Costs & budget

    CMTS 2027 exhibit space pricing is not published on the official website as of research date. Exhibitor space is sold via SME Sales Executives; interested companies should contact the CMTS sales office. Standard booth size of 9 sqm (approximately 100 sq ft) is referenced in third-party listings but not confirmed on official 2027 pages. [2023 edition] Exhibitor Manual lists GES Canada as the official show contractor for furnishings, carpet, booth packages, and material handling. (2023 data)

    source

    Build your working budget

    Adjust the inputs below to create a directional event budget.

    Estimated budget
    Live estimate
    • Hotel × 4 nights$356.00
    • Per diem × 4$240.00
    • Visa$100.00
    • Flight — Round-trip economy from major U.S. city$350.00
    Estimated total$1,046.00

    This is a directional estimate. Please verify live rates before booking.

    Cost reference

    Official cost items and estimated ranges for exhibitors.

    Booth space rental (standard shell scheme)

    exhibitor · standard

    USD 3000–15000 / per booth

    estimate

    Hotel (budget)

    both · budget

    USD 89–146 / per night

    estimate

    Hotel (mid-range)

    both · mid-range

    USD 130–200 / per night

    estimate

    Hotel (upscale)

    both · upscale

    USD 150–250 / per night

    estimate

    Visitor ticket

    visitor · standard

    CAD 100 / per person

    estimate

    UP Express train (airport to downtown)

    both · standard

    CAD 12.35 / one-way

    official

    Taxi (airport to venue)

    both · standard

    CAD 18–22 / one-way

    estimate

    Parking (on-site)

    both · standard

    Not yet confirmed

    official

    Decision

    Visit, exhibit, or skip?

    Should you go?

    Answer 7 quick questions to find out whether CMTS 2027 is a must-visit, a smart exhibit opportunity, or one to skip this cycle. Scores are weighted across visitor and exhibitor outcomes based on your role, budget, technology interests, readiness, and travel situation

    QUESTION 1 OF 7

    What is your primary role in manufacturing?

    Decision matrix

    Compare participation options side by side to choose the best fit for your objectives.

    visit

    You have a confirmed or emerging budget for manufacturing technology, a purchasing timeline within 18 months, and technology interests that align with CMTS's core categories: machine tools, automation, robotics, additive manufacturing, or Industry 4.0

    Best for

    Manufacturing decision-makers, engineers, plant managers, and buyers from automotive, aerospace, industrial machinery, and job shop sectors who are actively evaluating equipment, automation, or digital solutions within the next 6–18 months

    Min. budget

    $500.00

    Timeline

    1–2 days on the show floor; register at least 4–6 weeks in advance for travel and accommodation planning

    Risks

    Overwhelming show floor — plan your route and must-see exhibitors in advance using the SME+ App

    Airport-area hotels fill quickly during major trade shows — book early to secure preferred rates

    Some live demos and sessions require pre-booking or have limited capacity

    exhibit

    You have a proven product-market fit in Canada, a trained booth team, a clear lead-capture and follow-up strategy, and a budget that can accommodate booth space plus associated exhibit costs

    Best for

    Manufacturers, distributors, OEMs, and technology providers selling machine tools, automation, robotics, additive manufacturing systems, metrology, software, or industrial services into the Canadian market

    Min. budget

    $9,000.00

    Timeline

    6–12 months of lead time; booth space should be secured 9–12 months in advance for prime locations. Budget planning and booth design typically begin 6 months out

    Risks

    Total exhibit costs typically run 2–3 times the booth rental — budget for travel, shipping, staffing, and collateral

    High competition for attendee attention across 750+ exhibitors — pre-show marketing and booth staff training are essential

    Tariff-related economic uncertainty may affect attendee purchasing urgency in certain sectors

    skip

    Your budget is unconfirmed, your purchasing timeline exceeds 18 months, your technology needs fall outside machine tools, automation, additive manufacturing, and digital transformation, or the cost of travel to Toronto is prohibitive relative to your expected return

    Best for

    Companies with no confirmed budget, no active purchasing timeline, and technology interests outside CMTS's core categories. Also suitable for those with high international travel friction and no clear ROI case for attending or exhibiting this cycle

    Min. budget

    Not yet confirmed

    Timeline

    Not applicable

    Risks

    Missing valuable market intelligence and networking that could inform future technology decisions

    Competitors may gain visibility and customer relationships that are harder to replicate later

    CMTS is biennial — the next edition is not until 2029, so skipping means a two-year gap in access to this audience

    Book with

    Partners

    GES

    General Show Contractor

    Official general show contractor for CMTS. Provides furnishings, carpet, booth packages, material handling, labor, signs & graphics, and exhibit rentals. [2025 edition]

    Visit partner Confidence: high

    CMTS Exhibitor Manual

    SHOWTECH Power & Lighting

    Specialty Contractor

    Electrical, compressed air, plumbing, lighting, and sign installation services. Advance pricing deadline applies. [2025 edition]

    Visit partner Confidence: high

    CMTS Exhibitor Manual

    CCR Solutions

    Specialty Contractor

    Exhibitor services desk located at the Exhibitor Service Centre, Loading Dock, beside Hall J. [2025 edition]

    Visit partner Confidence: high

    CMTS Onsite Resources

    Cross Connect

    Specialty Contractor

    Exhibitor services desk located at the Exhibitor Service Centre, Loading Dock, beside Hall J. [2025 edition]

    Visit partner Confidence: high

    CMTS Onsite Resources

    Convention Data Services (CDS)

    Lead Retrieval

    Official lead retrieval systems provider. Early bird and advance rate deadlines apply. Contact: xpressleadpro@cdsreg.com or (800) 746. [2025 edition]

    Visit partner Confidence: high

    CMTS Exhibitor Manual

    FedEx

    Shipping & Logistics

    Event sponsor providing transportation, e-commerce, and business services. [2025 edition]

    Visit partner Confidence: high

    CMTS Event Sponsors

    Recommended providers

    Hotels

    onPeak

    onPeak was the only official hotel provider endorsed by CMTS 2025, securing discounted rates at a selection of Toronto hotels with flexible change and cancellation policies. Official CMTS hotel partners included: Crowne Plaza Toronto Airport (IHG), Delta Hotels by Marriott Toronto Airport & Conference Centre, DoubleTree by Hilton Toronto Airport, Hilton Toronto Airport Hotel & Suites, Hilton Garden Inn Toronto Airport, and The Westin Toronto Airport. [2025 edition] The official hotel booking portal for CMTS 2027 has not yet been published. Check cmts.ca for updates

    FAQs & glossary

    Answers

    Frequently asked

    Glossary

    1
    Additive Manufacturing
    A process of creating three-dimensional objects by adding material layer upon layer, commonly known as 3D printing, highlighted at CMTS through the RAPID + TCT Showcase
    2
    Smart Manufacturing
    The use of advanced technologies such as AI, automation, digital twins, and IIoT to optimize production processes, featured in the Smart Manufacturing Experience zone at CMTS
    3
    Industry 4.0 / IIoT
    The fourth industrial revolution characterized by the industrial internet of things (IIoT), cyber-physical systems, and connected factories, represented in CMTS technology exhibits
    4
    Machine Tools & Tooling
    Equipment and accessories used for machining, cutting, forming, and fabrication of metal and other materials, showcased in a dedicated pavilion at CMTS
    5
    RAPID + TCT
    A showcase at CMTS focused on additive manufacturing and 3D printing advancements, bringing together leaders in the additive ecosystem

    Trust footer

    Sources

    89

    References

    47

    Publishers

    0

    Date checked

    1

    CMTS

    2

    Toronto Pearson International Airport

    3

    Government of Canada

    4

    WeatherSpark

    Digital business cards for the show floor

    Display a free company card at your booth, or share your professional card on the show floor.

    Create a free card